This site in german: IFA-Fahrzeuge > Framo 
You are here: > IFA-vehicles> Framo
Navigation

Framo

Category Framo has the following subcategorys:

The complete offer in Framo

Bulb retainer display instruments

Holder for bulbs as an checked secound hand part. Can be used for nearly all IFA vehicles.
Type with contact pin for wire plug: 6,3x0,8 (standart)
Useabe for bulbs 6V, 12V oder 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.
  • delivery without bulb and pin
  • new Reproduction
4,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7843

Retro back up lamp for rear bumper

Chromed back up light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.
  • colour: chromium-plated casing, clear glass
  • size: 11 x 5,5 cm
  • delivery without bulb
  • made in Germany
  • with E-icon
184,10 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 6876
Delivery only at advance payment.

Bulb retainer display instruments, screw pin

Holder for bulbs with screw pin for wire connection. Can be used for nearly all IFA vehicles.
Type with contact for screw connection: up tp 1,5 mmm².
Useabe for bulbs 6V, 12V oder 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.
  • new spare part
  • delivery without bulb
6,10 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7844

Retro rear fog lamp for rear bumper

Chromed reversing fog light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.
  • colour: chromium-plated casing, red glass
  • size: 11 x 5,5 cm
  • delivery without bulb
  • made in Germany
  • with E-icon
210,36 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6877
Delivery only at advance payment.

Retro licence plate lights

Chromed reversing registration plate light.
Mounting with two M6 nuts.
The lamp made of high end fabrication and the design fit brilliant to historical cars.
  • colour: chromium-plated casing, clear lense
  • size: L=82mm x B=29mm x H=27mm
  • bolt distance: 45mm
  • delivery without bulb
  • made in Europe
  • mit E-Zeichen
16,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7989

Replacement glass for RETRO reverse lamp

Red glass as spare part for our RETRO reverse indication lamp
  • material: clear (white) glass
  • made in Germany
8,93 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7137

Replacement glass for RETRO rear fog lamp

Red glass as spare part for our RETRO fog light
  • material: red glass
  • made in Germany
19,99 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7136
1+1

Sealing set Carburettor H362

Paper sealing kit for carburettor type H 362- for Framo, Wartburg 311, 312, 313 and some boat engines with this carburettor type.
Best use to refresh the carburettor. All parts are made from the orignial patterns and our own quality grade.
Set consist of:

  • one set will be needed
  • material: sealing paper, Vulkanfieber, fuel resistant rubber
  • high quality made in Germany
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8266

V-belt 13x1030

V-Belt for the models Wartburg 311, 312 engines and Framo with V-pully without anti-vibration damper (mounting nut SW46 at the v-pully)
widness: 13mm
length: 1030mm
  • best qualitiy, made in Germany
17,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7505

V-pully wheel for crank shaft 1000ccm

Modificated v-pully wheel for crankshaft for the models Wartburg 311, 312 engines, Framo with V-pully without anti-vibration damper (mounting nut SW46)
  • scop of delivery inclusive two piston rings, but without outside steel ring
  • good qualitiy, made in Germany

Please note, we can only exchange you this spare part if you ship 1x V-pully to our company in advance!
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
148,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7000

V-belt 13x1060

V-Belt for the models Wartburg 311, 312 engines and Framo with V-pully without anti-vibration damper (mounting nut SW46 at the v-pully)
widness: 13mm
length: 1060mm
  • best qualitiy, made in Germany
20,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7506

Crankshaft 1000ccm

Complete overhauled crank shaft for the models Wartburg 311, 312 engines, Framo with V-pully without anti-vibration damper (mounting nut SW46)

Crankshaft sealings are modificated to piston ring sealing pully- and fly wheel side.
  • with standard version of conrod
  • delivery iclusive needle bearings for the piston pins diameter: 20mm
  • good qualitiy, made in Germany

Please note, we can only exchange you this spare part if you ship 1x used crank shaft and 1x V-pully to our company in advance!
1800,00 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6995

crankshaft 900ccm

Complete overhauled crank shaft for the models Wartburg 311, 312 engines, Framo with V-pully without anti-vibration damper (mounting nut SW46)

Crankshaft sealings are modificated to piston ring sealing at the fly wheel side.
The old type of labyrinth seal is modificated to pistion ring seal.
  • delivery iclusive bronze bearings for the piston pins diameter: 18mm
  • high qualitiy, made in Germany

Please note, we can only exchange you this spare part if you ship 1x used crank shaft to our company in advance!
2000,00 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7009
1+2

Ignition distributor cover IFA F9 Framo

Ignition distributor cover for the car models IFA F9 und Framo.
36,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7043

Cylinder head packing 900 ccm - 8 bolts with metal ring

Head packing for the 900 ccm, 3-cylinder two stroke engine.
Material consist of paper seal with dry graphite.
It fit to Wartburg 311, 312 Framo, DKW and motor boate with 0,9 Liter swept volume and 8 bolts for cylinder head mounting.
  • made in Germany
  • inner diameter cylinder: 72 mm
  • thickness: 1,2mm
  • one piece will be needed
56,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6789

Cylinder head packing 1000 ccm - 8 bolts with metal ring

Head packing for the 1000 ccm, 3-cylinder two stroke engine.
Material consist of paper seal with dry graphite.
It fit to Wartburg 311, 312 Framo, DKW and motor boate with 1 Liter swept volume and 8 bolts for cylinder head mounting.
  • made in Germany
  • inner diameter cylinder: 76 mm
  • thickness: 1,2mm
  • one piece will be needed
56,31 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8105

Cylinder head packing 900 ccm - 12 bolts with metal ring

Head packing for the 900 ccm, 3-cylinder two stroke engine.
Material consist of paper seal with dry graphite and matal ring.
It fit to Wartburg 311, 312 Framo, DKW and motor boate with 0,9 Liter swept volume and 12 bolts for cylinder head mounting.
  • made in Germany
  • inner diameter cylinder: 72 mm
  • thickness: 1,2mm
  • one piece will be needed
62,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6788

Bearing fan shaft

One row roller bearing for the fan shaft thrue the cylinder head of the 900 ccm and 1000ccm 3-cylinder two stroke engines.
It fit to Wartburg 311, 312 Framo, DKW and motor boates.
  • made by FAG
  • not covered ball bearing
  • tow piece will be needed
9,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7507

Self-aligning bearings fan shaft

Bearing for the fan shaft thrue the cylinder head of the 900 ccm 3-cylinder two stroke engines (old version)
It fit to Wartburg 311, 312 Framo, DKW and motor boates.
  • made by FAG
  • both sides with sealings
  • tow piece will be needed
34,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7508
1+1

Bolt for cylinder head

cylinder bols fit to:
  • Wartburg-353, 2-stroke, 3-cylinder,1000ccm or 1200ccm, 8 or 12 bolts
  • Wartburg-3112-stroke, 3-cylinder,900 or 1000ccm, 8 or 12 bolts
  • Barkas-B1000,2-stroke, 3-cylinder,1000ccm, 8 bolts
  • Framo 2-stroke, 3-cylinder 900ccm, 8 or 12 bolts



The tightening torque and the sequence of mounting of the cylinder head nuts you can find at (Details)
Special offer normaly 11,81 € now 8,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6931

Exhaust manifold seal

Paper seal with dry graphite. It fit to all Wartburg 353, 312, 311 and B-1000 with 3-cylinder two stroke engine.
  • very good quality of material and with good dimension accuracy
  • without metall ring
  • inner diameter: 43 mm (1,693 inch)
  • three pieces will be needed
  • made in Germany (only available by LDM-Tuning)
4,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3011

Exhaust manifold seal with metall ring

Paper seal with dry graphite. It fit to all Wartburg 353, 312, 311 and B-1000 with 3-cylinder two stroke engine. Usefull for all tuning engines for example RS 1000, Leutert.
  • brilliant quality with metall ring
  • inner diameter: 45 mm
  • three pieces will be needed
  • made in Germany
15,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6706

Radiator end cap, crome, W311, Framo

Zinc-coated end cap (seal) fit to radiator of Wartburg 311 and for Framo.
Type without tongue.
  • diameter of zinc-coated cap with knurling: 72mm
  • inner parts of seal cap made of brass
  • with rubber sealing (diamter about 48mm)
Made in Germany
23,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7491

Radiator end cap, crome, W311, Framo

Crome-coated end cap (seal) fit to radiator of Wartburg 311 and for Framo.
Type without tongue.
  • diameter of chrome-coated cap with knurling: 72mm
  • inner parts of seal cap made of brass
  • with rubber sealing (diamter about 48mm)
Made in Germany
28,26 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7490

Radiator end cap, zinc, with strap, W311, Framo

Zinc-coated end cap (seal) fit to radiator of Wartburg 311 and for Framo.
Type inclusive tongue to fix an small retainer cain.
  • diameter of zinc-coated cap with knurling: 72mm
  • inner parts of seal cap made of brass
  • with rubber sealing (diamter about 48mm)
Made in Germany
23,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6586

Radiator end cap, crome, with strap, W311, Framo

Crome-coated end cap (seal) fit to radiator of Wartburg 311 and for Framo.
Type inclusive tongue to fix an small retainer cain.
  • diameter of chrome-coated cap with knurling: 72mm
  • inner parts of seal cap made of brass
  • with rubber sealing (diamter about 48mm)
Made in Germany
28,26 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7489

radiator end cap W311, Framo

zinc-coated end cap (seal) fit to radiator of Wartburg 311 and Framo
  • with additional pressed-on aluminium cover
  • diameter of aluminium cover with knurling: 100 mm
  • inner parts of seal cap made of zinc-coated sheet metall and brass
  • with rubber sealing (diamter about 48mm)
Made in Germany
22,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6597

radiator flange W311, Framo

brass-fitting to solder on radiator
  • fit to Wartburg 311 and Framo
  • inner diameter (solder side): 40 mm
  • outer diamter (side of cap): 69 mm
  • height: 23 mm
Made in Germany
25,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6588

Valve for cooling water

Brass drain cock will be mounted direct on the motor block (exhaust side).
Fit to: Wartburg 311, 312,313, 353, Framo, Barkas B1000.
25,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6937

Coolant hose, 15 x 3,5mm (yard goods)

rubber coolant hose with textile inset (DIN 73411 7/79)
  • up to 6 bar
  • Inner diameter: 15 mm (0,59 inch)
  • Thickness of wall: 3,5 mm (0,138 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Deliverable as yard goods. If order two pieces of this article we will deliver one piece with a length of two Meter.
price 17,92 Euro / meter
17,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6936

Coolant hose, 25 x 3,5mm (1 Meter)

rubber coolant hose with textile inset (DIN 73411 issue 1955)
  • working pressure: 3 bar
  • Inner diameter: 25 mm (1 inch)
  • Thickness of wall: 3,5 mm (0,138 inch)
  • Outer and inner layer made of black SBR-rubber quality
  • resistant against hot water with antifreeze admixture from -20°C up to +95°C

Only obtainable in pieces of one Meter.
Inexpensive alternative for coolant hose 25mm x 4,5mm with lower resistance against pressure and temperatureFit to many veteran cars, for instance Wartburg 311price 14,77 Euro / meter
14,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6948

Coolant hose, 25 x 4,5mm (1 Meter)

Rubber coolant hose with textile inset (DIN 73411 7/79)
  • bup to 6 bar
  • Inner diameter: 25 mm (1 inch)
  • Thickness of wall: 4,5 mm (0,177 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of one Meter.
price 29,86 Euro / meter
29,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6917

Alternator DC 6V

Dynamo for vehicles with 6V direct current.
Fit to the folloing cars: : Trabant, Wartburg 311, 312 und Framo.
  • new spare part (original-IFA-part)
  • type: 220W
  • scope of delivery without belt pulley

mostly the generator has an external regulator.
380,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 761

Regulator and cotout relay ( 6V/220W ) for DC 6V Dynamo

External mechanical regulator for use at the DC dynamo to control the battery voltage.
Fit to Trabant 500, 600 and 601, Framo, Wartburg 311
Original spare part.
  • voltage: 6V
  • use for DC dynamo: 220W
  • made in Germany
original spare part number: AKA 8101.7
95,22 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 776

Regulator and cotout relay 12V/220W for DC 6V Dynamo

External mechanical regulator for use at the DC dynamo to control the battery voltage.
Fit to Trabant 500, 600 and 601, Framo, Wartburg 311
Original spare part.
  • voltage: 12V
  • use for DC dynamo: 220W
  • made in Germany
original spare part number: AKA 8102.9
95,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7904
1+1

Starter 6V

Starter for 6V vehicles.
Fit to the fallowing cars: Wartburg 311, 312, Framo und IFA F9
  • overhauled in Germany
  • your old starter have to be first shipped to our company for exchange
195,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6815

Dial gauge shock proof

High quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in Germany
  • scope of delivery without seperate extension pin
  • shock proof
107,04 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6821

Extensions pin for Dial gauge, 60mm

Extension for dial gauge. Fit to all offered gauges
  • thread: M2,5
  • diameter: 4mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
3,09 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7302

Dial gauge digitale type

Good quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
45,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7301

Dial gauge simple type

High quality dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in Germany
  • scope of delivery without seperate extension pin
  • non shock proof
69,04 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 6820
Delivery only at advance payment.

Dial gauge simple type

Cheap dial indicator for example to adujst the ignition timing.
  • case diameter: 58mm
  • tolerance: 0,01mm
  • effective range: 0-10mm
  • made in China
  • scope of delivery without seperate extension pin
  • non shock proof
24,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7300

Adapter M18 ignition ajustment

adapter for the dial gauge to adjust the ignition point.
Fit to the spark plug tap M18. Hexagon nut for mounting SW 22.
usefull for the fallowing vehicles:
  • made in Germany
  • material: brass
  • Trabant 500,600,601
  • Wartburg 311
  • Framo
  • IFA F8 / F9
  • P70
28,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6819

Universal boot kit

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:
  • length:19cm diameter:10mm / 30mm
  • length:23cm diameter: 35mm / 35mm
  • length:15cm diameter:30mm / 42mm
  • length:13cm diameter:41mm / 48mm
  • length:12cm diameter:41mm / 55mm
  • different length and diameter combinable
  • length of the bellow pice: 95mm
17,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7010

LDM-Design outer rear view mirror, right

chromed Design rear view mirrors for co-drivers side (right door)
arm is made of zinc die casting (chromed)
mounting in the same way like original rear view mirrors

These outer rear view mirrors was elaborate handmade by LDM-tuning
no series producktion!
Please note: Delivery without steel clamp!
88,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7063

LDM-Design outer rear view mirror, left

chromed Design rear view mirrors for drivers side (left door)
arm is made of zinc die casting (chromed)
mounting in the same way like original rear view mirrors

These outer rear view mirrors was elaborate handmade by LDM-tuning
no series producktion!
Please note: Delivery without steel clamp!
88,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6337

Spark plug terminal universal 5 kOhm

Best terminal without metalcoat for all versions of sparks.
Good replacment as the old type of spark plugs with thread type M18.
Resistance type suppressor: 5kOhm
producer: NGK
inclusive rubber seal for ignition wire and spark plug.
9,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7724

Spark plug M18 - 260, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (T18).
The heating rate complies 260 (cold spark plug), best use for water and air cooled engines special for tuning engines.
Made by NGK, Japan.
Bosch Nr. M260 T1
13,11 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7531

Spark plug M18 - 175, *ISOLATOR*

M18 spark plug. This part is an NOS spare part with thread M18 x 1,5mm.
The spanner gap is 26mm.
The heat rating is cose to 175. Can be used for wather cooled two stroke engines like Wartburg, Barkas, Framo, ZW1103
12,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 1192

Spark plug M18 - 175, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (W18).
The heating rate complies 175 (warm spark plug), best use for water cooled engines.
Made by NGK, Japan.
Bosch Nr. M175 T1
spanner gap: SW 21
11,32 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7529

Spark plug M18 - 225, NGK

Spark plug for using at tow stroke engines with thread M18.
Good replacement for the original spare part (T18).
The heating rate complies 225 (cold spark plug), best use for water and air cooled engines.
Made by NGK, Japan.
Bosch Nr. M225 T1
11,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7530

Reflector round, red (catseye) for rear bumper, metal ring

Round reflector for rear bumper corner of Trabant 500 and 600 (P50/60) or some other oldtimers, with additional aluminium frame around it.
Only partially fit to back light of Trabant 601 (mounting bolt could be to short).
  • Outer diameter: 63,5 mm (2,5")
  • Colour: red
  • refelector area: 20 cm²
  • aluminium ring frame
  • with base plate made of sheet metal
  • centric mounting bolt M5 x 15 mm
5,24 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6919

Reflector round, red (catseye) for rear bumper

Standard type of round reflector for rear bumper corner of Trabant 500 and 600 (P50/60)or some other oldtimers.
Only partially fit to back light of Trabant 601 (mounting bolt could be to short).
  • Outer diameter: 62,5 mm (2,46")
  • Colour: red
  • refelector area: 20 cm²
  • with base plate made of sheet metal
  • centric mounting bolt M5 x 15 mm
5,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6918

Brake master cylinder, 1 circle

Complete in Germany overhauled brake master cylinder.
Type: Renak CH 7
  • Brake master cylinder, 1 circle for Barkas B1000, Mulicar M22, Mulicar M24, ZT, 3to-Stapler, Warburg 311,312,313, Framo
  • piston diameter: 25,4mm

Details about the exchange parts:
This spare part we can only deliver in direct exchange.
Please send one overhaulable Brake master cylinder two-circle (original IFA production), case type: Renak to our company in advance. After checking the delivered parts for the possibility of overhauling we will send you the prepaid invoice.
Overhaul part, please send this part in advance to our company for refresh.
168,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7221

Magnet, complete for starter 12V

Solenoid switch for starter for Trabant 601, Wartburg 353 and Barkas B1000.
  • operating voltage: 12V
  • spare part made EU
  • one piece will be needed
58,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 784

Magnet, complete for starter 6V

Magnet switch for all starter types:
Trabant 500,600,601, Wartburg 311,312,313 and Barkas B1000 with 6V system.
This is an NOS spare part.
Original spare part number: 8201.6/3-400/1
65,23 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 780

Switch for warning flasher 6V, Original

6V version of switch for warning flasher. Original spare part.
With red round push button.
Fit to voltage of 6V.
Best use for Old and Youngtimer with 6V electrical system.
  • delivery without control bulb
  • contol bulb:Bulb 6V 1,2W
  • original-spare part no.: 8600.31/1
92,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 86

Switch 6 / 12V

Universal useable switch.
Please choose
Can be used for many Old and Youngtimers.
  • original spare part
  • Original number: 8600.34
switch knop
17,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7451

Knob for push switch 6 / 12V

Button insert for the push switchs.
Colour: yellow
Can be used for many Old and Youngtimers.
  • original spare part
  • delivery as an single part with snap ring
Original spare part number: 8600.33-2
0,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7960

Wire set for switch for warning flasher 6V

Cable set for the 6V version of switch for warning flasher.
Fit to voltage of 6V.
Can be used for many Old and Youngtimers.
Best use for Trabant as connecton between flasher unit, fuse box and switch.
  • original spare part
  • length about:630mm
  • one set will be needed
9,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7441

Protection bellows for pressure bar input brake master cylinder

Protection bellows for the single and tandem brake master cylinders.
fit ot vehicles: Framo, B1000, B1000-1, Wartburg 311, 312, 313, 353, Multicar M22, M24, M25.

inner diameter conical end: 15 mm
inner diameter cylindrical end: 37 mm
length: 35 mm - 58 mm
9,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4214

W50 hook for elastic band

special hook to use together with elastic string
  • fit to many trucks and trailers (W50/L60, ROBUR, Barkas B1000 and many more)
  • made of galvanised sheet metal
  • with two mounting holes (diameter: 5mm / well spacing: 34mm
1,91 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7317

slim hook for elastic band

small hook to use together with elastic string
  • fit to many trucks and trailers/camper
  • made of galvanised sheet metal (thickness = 2,5 mm)
  • with two mounting holes (diameter = 5,2 mm / well spacing = 20 mm)
  • wide total = hook wide: 13 mm
  • high total: 53 mm
1,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7319

large hook for elastic band

large hook to use together with elastic string
  • fit to many trucks and trailers (W50/L60, ROBUR, Barkas B1000 and many more)
  • made of galvanised sheet metal (thickness = 3mm)
  • with two mounting holes (diameter = 6,4 mm / well spacing = 45 mm)
  • wide total: 65 mm
  • hook wide: 16 mm
1,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7318

Rubber sealing cap for front direction indicator lamp (P50/P60/B1000/Multicar)

New produced sealing cap fit to old front flasher lights of Trabant 500 and 600 (P50/60), Barkas B1000 and Multicar truck and fit to Wartburg 311,312,313 and Framo, and fit to the side lights of the camp trailer INTERCAMP.
9,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7250

Universal brake line, CUNIFER 5m, 6mm

Brakepipeline 6 x 0,7 mm
made of NiCuFe
length: 5m
for B1000, B1000-1, Mulicar M22, M24, M26, Framo, Warburg 311 and 313
price for each meter: 8,60 €/m
42,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7398

Protection cap for starter lite ( plastic )

Sealing cap to protect the starter wire (plus) against dust and moisture.
Fit to the vehicles: P70, Trabant, Wartburg, Multicar, Framo and Barkas.
  • made in Germany
  • one piece will be needed
6,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 786

Ignition coil 6V, diameter 40mm, Germany

This coils can be used for Trabant 500, 600 and 601, Wartburg 313 and Wartburg 313, Framo with voltage of 6V.
Original spare part.
Sizes:
  • diameter: 40mm
  • total lenght:130mm
  • length of the aluminium case: 92mm
  • threads for connection wires: M4
67,33 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7990

Ignition coil 6V, diameter 40mm

This coils can be used for Trabant 500, 600 and 601, Wartburg 313 and Wartburg 313, Framo with voltage of 6V.
Made in Europe.
Sizes:
  • diameter: 40mm
  • total lenght:130mm
  • length of the aluminium case: 92mm
  • threads for connection wires: M4
30,46 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7987

Ignition coil 6V, diameter 62mm

This coils can be used for Trabant 500, 600 and 601, Wartburg 313 and Wartburg 313, Framo with voltage of 6V.
Original spare part.
Sizes:
  • diameter: 62mm
  • total lenght:156mm
  • length of the aluminium case: 121mm
  • threads for connection wires:M5
  • made in Germany
original spare part number: 8351.103/6
55,72 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 810

Windscreen washer kit 6V

Set for windscreen washer system with electrical pump and water bottle
voltage: 6V
Scope of delivery:
  • bottle 1,5 liter
  • cap
  • metal holder
  • wash pump 6V

Ideal for upgrate the mechanical hand pump into an electrical system.
56,53 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7597

Brush for starter

Spare-brushes of the starter engine to solder on at the coil set.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Baraks B1000-1)
mounting place: brushholder bas plate
  • size: 16X19x7
  • delivery as an single part
  • for each starter two pieces will needed
original spare part number: 8202.11-220:10
8,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 785

Bolt for starter

Bolt of the Bearing case of the starter engine.
Connection bolt will be mounted at the beraing case threadholes and on the other side it will hold the rear case cover.
Delivery as a single part without nuts an washers.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Barkas B1000-1)
  • original spare part
  • surface: galvaniced
  • total length: 16.5 cm
  • delivery as an single part
  • for each starter two pieces will needed
original spare part number: 8202.1-000:4/1
2,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7658

Spring for brush starter

Pressure spring for the brushes of the starter engine.
This spring will push the brush at the collector ring from the rotor shaft.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Barkas B1000-1)
mounting place: brushholder bas plate
  • original spare part
  • delivery as an single part
  • for each starter two pieces will needed
original spare part number: 8202.11-220.6
1,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7629

Battery 6V 84Ah, dry ( not charched )

Batterie for cars with 6V supply voltage. The capacity is 84 Ah. The starting power is 240A.
We just deliver this battery dry and uncharched.
Design fit to historical vehicles.
  • length: 22,5 cm
  • wide: 17,5 cm
  • highness case: 20 cm
  • total highness inclusive pins: 22 cm
  • made in Germany
+7,50 Euro deposit
225,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1225

Dust cap for ball bearing trunnion bearing rear

Metal cap for protection of the grooved ball bearing at the trunnion bearing A-S rear side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • outside diameter: 34mm
  • inside diameter: 15mm
  • one piece will be needed
original spare part number: 8001.4-200:6
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7804

Ball bearing for Dynamo ( old type )

Grooved ball bearing to retain the dynamo armature at teh case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part, delivery without mounting bits
  • high quality made by FAG
  • two pieces will be needed
8,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7796

Dust cap for ball bearing trunnion bearing A-S

Metal cap for protection the grooved ball bearing at the trunnion bearing A-S front side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • outside diameter: 29mm
  • inside diameter: 15mm
  • one piece will be needed
original spare part number: 8001.4-200:3
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7803

Trunnion bearing A-S dynamo older type

Rear side trunnion bearing complete with pre-installed brushes and pressure springs. Best use for overhauling.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part without mounting equipment and bearing
  • original spare part
  • one piece will be needed
original spare part number: 8001.5-300
62,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7807

Pin bolt for dynamo older type

Special pin for mounting the front and rear trunnion bearing A-S at the dynamo base case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • thread: M5
  • length: 170mm
  • two pieces will be needed
original spare part number: 8001.4-000:4
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7805

Retainer for Ball bearing Trunnion bearing A-S

Mounting holder for the grooved ball bearing at the trunnion bearing A-S front side.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part, delivery mounting screws
  • original spare part
  • one piece will be needed
original spare part number: 8001.4-200:2
3,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7802

Contact rail for dynamo older type

Middle contact for connection the wire D- at the electrical box.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • one piece will be needed
original spare part number: 8001.5-101
6,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7809

Wire clip for contact box

U-bolt to mount the cover on top of the connection terminal box
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-000:1
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7813

Contact box for dynamo older type

Wire connection terminal box for mounting at the dynamo case.
Delivery inclusive contact for wires DF and D+. Inclusive clamp bolt for connection the brushes.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • one piece will be needed
original spare part number: 8001.5-130
28,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7811

Armature for dynamo 6V

Dynamo rotour as an single part.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)
  • Single spare part, without bearings or mounting bits
  • original spare part
  • one piece will be needed
original spare part number: 8001.5-210
36,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7806

Brush spring for dynamo older type

Spring for the brushes to connect the rotor.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • two pieces will be needed
original spare part number: 8001.4/1-300:7/2
5,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7808

Field Ciol I for dynamo 6V

Stator coil (Field coil no.1) for mounting inside of the dynamo case.
The connecion wires have to be solided at the contacts.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)
  • Single spare part, without mounting bits
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-110
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7816

Field Ciol II for dynamo 6V

Stator coil (Field coil no.2) for mounting inside of the dynamo case.
The connecion wires have to be solided at the contacts.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)
  • Single spare part, without mounting bits
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-120
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7817

Retainer for contact rail

Tinned metal pice to solder the wire of the field coil at the middle contact (D-).
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-100:1(5)
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7812

Seal for flange suction pipe - engine block

Paper seal for the vehicles Barkas V901, Wartburg 311, 312, 313 and Robur LO.
Fit to the flange of the inlet manifold of the carburettor type 36 F,H 362-12 und H 362-24. Mounted:
  • between flange inlet manifold and engine mount
  • one pieces needed
  • fit for 900ccm and 1000ccm engines
7,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7910

Seal for flange suction pipe - engine block

Paper seal for flange of the inlet manifold of the carburettor type BVF 40 F, Jijkov and 36F. Mounted:
  • between flange inlet manifold and engine mount
  • one pieces needed
  • fit for Wartburg 353, B1000 and Wartburg 312
7,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6897

Cap for Ignition coil

Rubber cap for connection wires pin 1 and pin 15 at the ignition coils.
Useable for the 40mm and original 60mm coils with ring pin connection.
  • material: rubber, black
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7991

Screw-cap for brakeline 6 x 0,7

Screw-cap for brakeline 6mm x 0,7mm. The screws can be mounted at steel or nickel-copper brake lines.
Please count how much pieces zou need total.
Fit to Barkas B1000, Multicar M22, M24, M25 and all vehicles with 6mm brake line.
  • border: type E
  • thread: M12x1
  • material: steel, galvaniced
  • made in Germany
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7276
Delivery only at advance payment.

Bushing for starter motor

Busing made of braas for the starter of the Trabant 601, Wartburg 353 and Barkas B1000.
This bearing guides the armature in front and rear side.
Can be used for 6V and 12V starters.
  • delivery as an single part
  • original spear part
  • two pieces will be needed
5,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8440

Bulb retainer display instruments, additional negative terminal

Holder for bulbs as an new reproduction part. Can be used for nearly all IFA vehicles.
Type with two contact pins for wire plug: 6,3x0,8 (standart)
1x pin for plus terminal (+) and 1x pin for negative pin (-)
Useabe for bulbs 6V 2W or 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.
  • New repoduction
  • delivery without bulb
  • made in EU
3,80 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8443

Spring for idle screw, carburettor

Pressur spring for idle adjusting screw at the carburettor.
Fit for:
  • Straitdraft carburetor H 362- : Wartburg 311, 312 and 313
  • Straitdraft carburetor H 362- : Framo V901
  • Straitdraft carburetor H 362- : fire fighter pump TS8
  • Straitdraft carburetor : P70, F8
  • Downdraught carburettor BVF36F: Robur LO, Wartburg 353
  • Downdraught carburettor BVF40F: Wartburg 353, Barkas B1000
  • Block carburettor 28HB: Trabant 500,600 and 601

  • delivery as single part
  • surface: galvaniced
  • made in Germany
  • one piece will be needed
1,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8459

Brake master cylinder 25,4mm, 1 circle, Reproduction

Brake master cylinder as reproduction of the Renak CH 7.
New production made in EU.
Selling without exchange part.
  • Brake master cylinder, 1 circle for Barkas B1000, Mulicar M22, Mulicar M24, ZT, 3to-Stapler, Warburg 311,312,313, Framo
  • piston diameter: 25,4mm
  • delivery without mounting parts
Reproduction spare part
156,13 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8502
Delivery only at advance payment.

Brush for spark plugs

Brass brush for cleaning of spark plugs.
  • material: brass / wood
  • made in Germany
  • one piece will be needed
4,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8566
The complete offer in Framo

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas