This site in german: Trabant 601 > Ersatzteile > Getriebe 
You are here: > Trabant 601> Spare parts> Gearbox
Navigation

Gearbox and spare parts

Category Gearbox and spare parts has the following subcategorys:

The product category Trabant 601 > Spare parts > Gearbox is spread over 4 sites:

1234
Show all products

Distance washer for speedometer drive

Spezial washer between brass bushing and speedometer drive inside gearbox. Fit to all Trabant 601.
  • material: steel
  • one piece will be needed
2,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8456

Bushing for speedometer drive

Brass bushing for speedometer drive gearbox. Fit to all Trabant 601.
  • original spare part
  • material: brass
  • one piece will be needed
25,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6562

Friction cone

Friction cones are synchronizing the speed from the gears to the rotation speed from each driven shaft.
The Trabant 601 has a full synchronized gearbox.
  • material: brass alloy
  • 3 notches for looking element
  • 4 pieces will be needed
15,80 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6376

Set of switch for reverse speed

Switch set for mounting the reverse speed light.
delivery inclusive wiring diagram and connection cable.
original spare part.
19,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7292

Engine mounting, rear, complete ( round mounting )

Round rubber mounting with bolt M8 x 16 mm for bottom side
(connection to under frame) and vulcanized 3 mm sheet steel with bolt M8 x 16 mm for fixing upper side (connection to the gearbox).
  • Trabant 601: 1x gearbox mounting rear
  • material: rubber, steel ( with olive drap color)
  • width: 65 mm
  • highs: 38 mm
17,06 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 448

Engine mounting, front, complete ( oval mounting )

Ovel rubber mounting with bolt M8 x 16 mm for bottom side
(connection to under frame) and vulcanized 3 mm sheet steel with two external holes 8,5 mm for fixing upper side (connection to the motor or gearbox.
  • Trabant 500 - 600: 1x engine mounting front, 1x gearbox mounting front, 1x gearbox mounting rear
  • Trabant 601: 1x engine mounting front, 1x gearbox mounting front
  • material: rubber, steel ( with olive drap color)
  • width: 67 mm
  • length: 86 mm
  • highs: 38 mm
  • hole distance between 8,5 mm holes: 84 mm
22,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 449

Bolt-set engine - gearbox

Screw kit for the connection of the Trabant engine and gearbox.
Fit for all two stroke engines of Trabant 500,600 and 601
Survace: galvaniced
Contens:
  • 4x hexagon bolt long, M8
  • 2x hexagon socket bolt short, M12
  • deilvery inclusive washers and secure washers
5,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8451

Bottle spout for 20 Liter canisters

Plasic spout for the offered 20 liter mixture oel packages (Addinol)
Best use to ladle off form bigger tanks. Take on at journeys for instance two stroke oel.
  • delivery as single part
  • only use for the 20L canisters of the trade Addinol
5,09 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8457

Bottle spout with cock for 20 Liter canisters

Plasic spout with cock for the offered 20 liter mixture oel packages (Addinol)
Best use to ladle off form bigger tanks. Take on at journeys for instance two stroke oel.
  • delivery as single part
  • only use for the 20L canisters of the trade Addinol
5,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8662
The product category Trabant 601 > Spare parts > Gearbox is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Soldaten Ritter und Indianer Spielzeug