steering column and mounting parts

The product category Trabant 601 > Spare parts > Front axle > Steering is spread over 4 sites:

Flange

Notched flange as twist lock for the eccentric bushing.
Fit to the standard-steering at the Trabant 600 and 601.
{[original spare part][delivery without add on untis][one piece will be needed]}

ZAK number: 1342913204024103

24,11 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7550

Mounting screw for the notched flange at the steering case.
Fit to the standard-steering at the Trabant 600 and 601.
{[original spare part][delivery as single part without washer][two piece will be needed]}

ZAK number: 1357111204243496

0,15 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7551

Lock washer

Detail

Spring washer for the mounting screw for the notched flange at the steering case.
Fit to the standard-steering at the Trabant 600 and 601.
{[original spare part][delivery as single part][two piece will be needed]}

ZAK number: 1357342002023063

0,09 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7552

Grease nipple A6 Detail Ball grease nipple to attendance the steering column. Mounting place at the upper side of the steering case. Can be used for the standard-steering at the Trabant 600 and 601. {[thread: M6x1][spanner cap: SW7][delivery as an single part][one piece will be needed]}
original number: 9900152002	1,08 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7558

Grease nipple A8 Detail Ball grease nipple to attendance the steering column. Mounting place at the upper side of the steering case. Can be used for the standard-steering at the Trabant 500, 600 and 601. {[thread: M8x1][spanner cap: SW11][delivery as an single part][one piece will be needed]}
original number: 9900152002	1,24 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7559

Cylinder key gear rack

Detail

Pin-key for the steering rack to connect the steering arm and swivel.
Fit to the standard-steering at the Trabant 500,600 and 601.

one piece will be needed

2,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7555

Woodruff key gear rack Detail Key for the steering rack to connect the steering arm and swivel. Fit to the standard-steering at the Trabant 500,600 and 601. {[one piece will be needed]}
1,45 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7545

switch unit for ignition look switch Detail Switch unit for ignition look switch. Electrical part of ignition look switch wich is mounted at the backside. Latest version with six blad terminals. Best quality form the original manufacture made in Germany. Fit to Trabant 601 and Trabant 1.1
original spaer part number: 8630.10	19,90 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 825

Ignition look ( old type )

Detail

Fit to Trabant 500, 600 and 601 old type (6V) and Barkas B1000 (with ignition look inside dashboard).
key switch for ignition and starter with four terminals:

30 - permanent batterie power
15 - ignition power supply
54 - starter
P - special parking position of key (for car radio)

26,55 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 827

Lock plate for steering column assembley

Detail

lock plate for the nut of steering-gear arm

inner diameter: 14,4 mm
outer diameter: 36,0 mm
thickness of shett metall: 0,8 mm
surface: electrogalvanized and with oliv drap color

2,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 953

The product category Trabant 601 > Spare parts > Front axle > Steering is spread over 4 sites:

1 2 3 4
Show all products

* All prices inclusive VAT and plus shipping costs.