This site in german: Trabant 601 > Ersatzteile > Bremsen > Bremsleitung 
You are here: > Trabant 601> Spare parts> Brakes> Brake line

Brake pipes for Trabant

The complete offer in Brake pipes for Trabant

Connection tube line, right side

This brake pipe connect the both wheelbrake cylinder rihgt hand inside the brake drum direct at the brake base plate.
  • complete bordered
  • with screw-cap for brakeline 4.75 x 0,7
  • one piece will be needed
  • length of the brake tube line 300mm
  • diameter 4,75 x 0.7mm
12,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 218

Connection tube line, left side

This brake pipe connect the both wheelbrake cylinder left hand inside the brake drum direct at the brake base plate.
  • complete bordered
  • with screw-cap for brakeline 4.75 x 0,7
  • one piece will be needed
  • length of the brake tube line 300mm
  • diameter 4,75 x 0.7mm
12,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 119

Tube connector

Tube connector for Screw-cap for brakeline standard-Flare E
Trabant 601 one piece will be needed:
connection from Front centre brake line andRear centre brake line

The tube connector can be used for all kind of vehicles with brake lines D = 4.75mm and standard flare (E)
5,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6315

Front brake hose

flexible front brake hose connection between Inner front brake line right hand or Inner front brake line left hand and Outer front brake line right hand or Outer front brake line left hand
Fit to Trabant 500,600 and 601 with type of Simplex and Duplex brake sytem.
  • high quality product
  • new reproduction made in EU
  • one piece for each wheel brake side
10,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 230

Rear brake hose

short brake hose with female and male thread connection
suitable for rear brake of Trabant 601 and some trailer types
  • thread: M10 x 1
  • length complete: 18 cm
  • two pieces will be needed
  • maed in Europe
8,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 231

Rear brake hose, ATE

Rear short brake hose with female and male thread connection. Made by the german producer ATE.
Suitable for the rear brake of Trabant 601 all models (with coil or leaf spring) and some trailer types
  • high quality, made by ATE
  • thread: M10 x 1
  • length complete: 18 cm
  • two pieces will be needed
25,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8227

Brake hose retainer

sacer spring for connection between flexible brake hose and brake pipe
not the same design like the originale one (made for VW). This retainer can be also used for Trabant and Wartburg.
  • electrogalvanized, black
  • high quality made in Germany, spring metal
  • one piece for each screw joint will be needed
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6624

Brake hose retainer, original style

sacer spring for connection between flexible brake hose and brake pipe
  • surface bronzing
  • one piece for each screw joint will be needed
2,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 240
1+1

Brake lines front axle, if 1-circle brake master and/or simplex brake system

Inner front brake line, complete, left side 1 circle

Pre-convoluted and bordered brake line.
Connection between one-circle brake master cylinder to font brake hose left hand.
  • length: 400mm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601
  • one piece will be needed
12,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 250

Inner front brake line, complete, right side 1-circle

Pre-convoluted and bordered brake line.
Connection between one-circle brake master cylinder to font brake hose right hand.
  • length: 700mm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601
  • one piece will be needed
13,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 251

Outer front brake line, complete, left side 1 circle, simplex

Pre-convoluted and bordered brake line.
Connection between wheel brake cylinder to font brake hose left hand.
  • length: about 21 cm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 500, 600 and 601 with simplex brake system at front axle
  • one piece will be needed
13,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6698

Outer front brake line, complete, right side 1 circle, simplex

Pre-convoluted and bordered brake line.
Connection between wheel brake cylinder to font brake hose right hand.
  • length: about 16 cm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 500, 600 and 601 with simplex brake system at front axle
  • one piece will be needed
13,65 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6699

Brake lines front axle with 2-circle brake master and duplex brake system

Outer front brake line, complete, right side ( 350 mm )

Pre-convoluted and bordered brake line.
Connection between front brake hose to wheel barke cylinder below, front right hand.
  • length: 350mm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601
  • one piece will be needed
12,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 252

Outer front brake line, complete, left side ( 350 mm )

Pre-convoluted and bordered brake line.
Connection between front brak hose to wheel barke cylinder below, front left hand.
  • length: 350mm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601
  • one piece will be needed
12,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 253

Inner front brake line, complete, right side ( 700 mm )

Pre-convoluted and bordered brake line.
Connection between front brake hose to barke master cylinder ahead, front right hand.
  • NOS new original spare part
  • length: 700 mm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601
  • one piece will be needed
original spare parts
18,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 254

Inner front brake line, complete, left side ( 350mm )

Pre-convoluted and bordered brake line.
Connection between front brake hose to barke master cylinder ahead, front left hand.
  • length: 350 mm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601
  • one piece will be needed
15,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 255

Front centre brake line, complete ( 1000 mm )

Pre-convoluted and bordered brake line.
Connection between Brake master cylinder to tube connector. Brake line for the rear brake cylinders.
  • length: 1000 mm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601
  • one piece will be needed
24,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 256

Rear centre brake line ( 1630 mm )

Pre-convoluted and bordered brake line.
Connection between tube connector to distributor for brake line rear brake cylinders right and left hand.
  • length: 1630 mm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601
  • one piece will be needed
32,08 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 257

Brake line distributor

Tey junction to connect the rear brake pipes right and left hand.
The long brake pipe 1630mm and both rear brake hoses are mounted at the T-connector.
axle with leaf spring.
[L[new reproduction][made of brass][one piece will be needed]}
36,69 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8358

Brake line distributor, low budget

Tey junction to connect the rear brake pipes right and left hand.
Simple construction for low budget.
The long brake pipe 1630mm and both rear brake hoses are mounted at the T-connector.
axle with leaf spring.
[L[Reproduction made in Europe][one piece will be needed]}
9,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7908

Rear brake line, complete, right side ( leaf spring )

Pre-convoluted and bordered brake line.
Connection between rear brake hose to rear brake cylinder, right hand, rear axle with leaf spring.
  • length: 550 mm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601 up to year april 1988
  • one piece will be needed
12,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 258

Rear brake line, complete, left side ( leaf spring )

Pre-convoluted and bordered brake line.
Connection between rear brake hose to rear brake cylinder, left hand, rear axle with leaf spring.
  • length: 550 mm
  • material: steel line, zinc-coated 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601 up to year april 1988
  • one piece will be needed
12,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 259

Rear brake line, complete, right side ( coil spring )

Bordered brake line.
Connection between rear brake hose to rear brake cylinder, right hand, rear axle with coil spring.
  • length: 530 mm
  • material: copper-brake line 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601 from year april 1988 and all Trabant 1,1
  • one piece will be needed
12,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 260

Rear brake line, complete, left side ( coil spring )

Bordered brake line.
Connection between rear brake hose to rear brake cylinder, left hand, rear axle with coil spring.
  • length: 530 mm
  • material: copper-brake line 4,75x0,7
  • scope of delivery with 2 pieces outlet nuts
  • fit to all Trabant 601 from year april 1988 and all Trabant 1,1
  • one piece will be needed
12,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 261

Universal brake line made of steel, PVC-coated 5m, 4,75x0,7

Brakepipeline made of steel and plastic coated.
One set constists of 6mm x 0,7mm 5m long
for Trabant, Wartburg, Volkswagen
price 3,05 Euro / meter
15,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 262

Universal brake line, PVC-coated in 1 m pices max.5m, 6x0,7

Brakepipeline made of steel and plastic coated.
Dimensions: 6mm x 0,7mm maximum 5m long.
Fit to Trabant, Wartburg, Volkswagen.
Price per meter.
Price: 6,50 Euro / Meter
6,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 263

Universal brake line, CUNIFER 5m, 4,75x0,7

Brakepipeline made of NiCuFe material. Size 4,75 x 0,7 mm with length of 5m
Fit for many cars also for Trabant, Wartburg
priece 5,45 Euro / meter
37,01 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6177

Screw-cap for brakeline 4,75x0,7 Trabant

Screw-cap for breakline 4,75mm x 0,7mm
fit to Trabant 500, 600, 601 and Trabant 1,1
0,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 264

Brake line set, complete ( leaf spring )

without the both connection tubes
connection tube right side (article no. 218) and
connection tube left side (article no. 119) have to ordered separately if needed
84,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 280

Brake line set, complete ( coil spring )

without the both connection tubes
connection tube right side (article no. 218) and
connection tube left side (article no. 219) have to ordered separately if needed
Bitte beachten beim Versand: +6,85 Euro extra Sperrgutzuschlag !
87,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 281

Front brake hose, TRW

Flexible front brake hose made by TRW, connection between Inner front brake line right hand or Inner front brake line left hand and Outer front brake line right hand or Outer front brake line left hand
Fit to Trabant 500,600 and 601 with type of Simplex and Duplex brake sytem.
  • high quality product
  • new reproduction made in EU
  • one piece for each wheel brake side
24,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8307
The complete offer in Brake pipes for Trabant

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas