This site in german: Trabant 601 > Ersatzteile > Karosserie > Motorraum 
You are here: > Trabant 601> Spare parts> Body> Engine compartment
Navigation

spare parts for the engine compartment Trabant 601

The complete offer in spare parts for the engine compartment Trabant 601

Engine bonnet

Trabant 601 engine bonnet. Single part without isulation material and strutting.
Original spare part.
175,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 400

Bonnet reinforcement

89,99 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 398

Dolphin pile for engine bonnet

self-adhesive sound absorbing mat for engine bonnet
  • with polyurethane surface coating
  • colour: grey
  • content: 2x mat with 500 x 1000mm (=1qm)
Price: 134,32 Euro / m²
134,32 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6751

Bonnet prop

Trabant 601 bonnet prop. Delivery without mounting pins.
Fit to Trabant 601 and some of Trabant 1,1 types.
36,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 402

Lock for engine bonnet

Two-stage bonnet lock for the Trabant 601 and Trabant 1,1 engine bonnet.
  • original spare part
  • delivery as single part with out any mounting parts
  • one piece will be needed
48,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 395

Bowden cable for bonnet look

Bonnet opener cable is mounted at the one side with an screw joint at the bonnet look an on the other hand thru the bulkhead left side down under the instrument panel.
  • lenght comlete: 1540 mm
  • lenght of bowden cable: 1385 mm
  • diameter of steel wire: 1,5 mm
  • diameter bowden cable: 5,5 mm
  • scope of delivery without plastic opener
  • one piece will be needed
28,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 748

Bowden cable for bonnet look (EU reproduction)

Bonnet opener cable is mounted at the one side with an screw joint at the bonnet look an on the other hand thru the bulkhead left side down under the instrument panel.
Made in EU.
  • lenght comlete: 1540 mm
  • lenght of bowden cable: 1385 mm
  • diameter of steel wire: 1,5 mm
  • diameter bowden cable: 5,5 mm
  • scope of delivery without plastic opener
  • one piece will be needed
12,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8461

Handle for bowden cable bonnet look

Plasic handle for bonnet opener cable.
Mounting place: thru the bulkhead left side down under the instrument panel.
  • Material: plasic, black
  • original spare part
  • one piece will be needed
8,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8441

Button pad, black

Rubber pad for the engine bonnet. Mounting place 4x inside the wather strips around the mudguards front lest and right hand.
Additional 2 pieces are placed at the front grille assembly.
Fit for all Trabi.
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool. Made in Germany
  • material: temperatur and sunlight resistant rubber, colour black
  • Neuproduktion in Erstausrüsterqualität
  • own produced moulding
  • made in Germany
  • for each car 6 pieces will be needed
  • fit for all Trabant two stroke and Trabant 1.1
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 404

Button pad, grey

Rubber pad for the engine bonnet. Mounting place 4x inside the wather strips around the mudguards front lest and right hand.
Additional 2 pieces are placed at the front grille assembly.
Fit for all Trabi.
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool. Made in Germany
  • material: temperatur and sunlight resistant rubber, colour grey
  • Neuproduktion in Erstausrüsterqualität
  • own produced moulding
  • made in Germany
  • for each car 6 pieces will be needed
  • fit for all Trabant two stroke and Trabant 1.1
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8225

Button pad, beige

Rubber pad for the engine bonnet. Mounting place 4x inside the wather strips around the mudguards front lest and right hand.
Additional 2 pieces are placed at the front grille assembly.
Fit for all Trabi.
This part is an new reproduction, best replacement for the original one. Made from our own produced moulding tool. Made in Germany
  • material: temperatur and sunlight resistant rubber, colour beige
  • Neuproduktion in Erstausrüsterqualität
  • own produced moulding
  • made in Germany
  • for each car 6 pieces will be needed
  • fit for all Trabant two stroke and Trabant 1.1
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8226

Steel bolt for Aluminium joint for engine bonnet

Pin for connection between adjusting bolt engine bonnet and alu joint for engine bonnet.
  • two pieces will be needed
1,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6841

Stainless steel bolt for Aluminium joint for engine bonnet

Pin made of stainless steel for connection between adjusting bolt engine bonnet and alu joint for engine bonnet.
  • Material: VA, stainless steel
  • two pieces will be needed
5,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8587

Clamp bolt for Steel bolt aluminium joint for engine bonnet

The cylinder-head screw, slotted M3 x 6 have to be mounted at the alu joint for engine bonnet to fix the steel pin.
  • two pieces will be needed
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6842

Aluminium joint for engine bonnet, complete

Aluminium hinge for joint engine bonnet.
Delivery as singel part, without any mounting bits.
New reproduction.
12,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 403

Joint element for engine bonnet

ring eye bolt connection between alu joint for engine bonnet and bonnet reinforcement.
Reproducion made in Germany
  • Material: steel, galvaniced
  • two pieces will be needed
9,37 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8591

Mounting bolt for joint for engine bonnet

Hexagon bolt for mounting the engine bonnet joint at the car body (water drain)
  • delivery inclusive washer
  • two pieces will be needed
  • galvaniced
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6846
Engine Compartment plugs and grommets

Rubber grommet for tachometer shaft

rubber grommet for flexible speedometer shaft
fit to all variants of Trabant 601 and 1.1
  • inner diameter: 7,5 mm
  • for hole diameter of: 25 mm
  • thickness: 7,5 mm
  • one piece will be needed
4,85 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6734

Rubber membrane plug for holes with diameter of 25mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 25 mm
inner diameter of membrane (max. usable diameter): 18,5 mm
outer diameter (total): 30,5 mm
thickness: 7 mm
1,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7625

Rubber membrane plug for holes with diameter of 20,5mm

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 20,5 mm
inner diameter of membrane (max. usable diameter): 13,5 mm
outer diameter (total): 25 mm
thickness: 7 mm
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6797

Rubber membrane plug for holes with diameter of 37mm

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 37 mm
inner diameter of membrane (max. usable diameter): 29 mm
outer diameter (total): 44 mm
1,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6799
2+1
1+1
Hot- and cold air heating system

Black rubber hose , hot air 80x300mm

Connection hose between heating silencer and heating mixing chamber inside the engine compartment. The rubber hose ferried the hot air to the car. It fit to all Trabant 601 models from april 1973.
  • material: rubber
  • diameter: 80 mm
  • lenght: 300 mm
  • one piece will be needed
price 24,84 Euro per meter
7,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7125

black rubber hose , fresh air 80x550

connection hose between radiator-dummy and heating mixing chamber inside the engine compartment. The rubber hose ferried the fresh air to the car. It fit to all Trabant 601 models from april 1973.
  • material: rubber
  • diameter: 80 mm
  • lenght: 550 mm
  • one piece will be needed
price 24,84 Euro per meter
13,66 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 709

Rubber hose, heated air 80x120

connection hose between pree-silencer and noise silencer for heating systemradiator(down) or between noise silencer for heating systemradiator(top) and heating mixing chamber inside the engine compartment. The rubber hose ferried the heated air to the car. It fit to all Trabant 601 models from november 1976.
  • material: rubber
  • diameter: 80 mm
  • lenght: 120 mm
  • two pieces will be needed
price 52,08 Euro per meter
6,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 710

Noise silencer for heating system

Noise silencer for heating system
fit to Trabant 601 2-stroke engine from vintage: november 1976
  • material: galvaniced metal
  • inlet diameter: 1x 80 mm, 1x 48 mm
  • outlet diameter: 80 mm
  • original spare part
  • one piece will be needed
76,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6196

Sealing for bowden wires

Small rubber plug to seal the cables and bowden wires through the bulkhead from the passenger compartment to the Trabi engine compartment.
Can be used for choke and 2x heating control wires (heating´mixing chamber)
  • material: rubber, black
  • for Trabant, all types
  • made in Germany
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8147

Mixing chamber new

Mixing chamber for heating- fresh air system, fit to Trabant 601 2-stroke engine from vintage: november 1976
  • material: metal
  • inlet diameter: 2x 80 mm
  • original spare part
  • one piece will be needed
49,50 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7126

Clamp for mixing chamber

Steel mounting clamp for the mixing chamber for heating- fresh air system, fit to Trabant 601 2-stroke engine from vintage: november 1976
Scope of delivery inclusive mounting clamp.
  • material: metal
  • single part without mounting parts
  • inlet diameter: 2x 80 mm
  • original spare part
  • one piece will be needed
12,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7995

Mixing chamber used element

Mixing chamber for heating- fresh air system, fit to Trabant 601 2-stroke engine from vintage: november 1976
Please note, this spare part is secound hand. It is complete checked at function and that all sealings for the flaps will be ok.
Scope of delivery inclusive mounting clamp.
  • material: metal
  • inlet diameter: 2x 80 mm
  • original spare part
  • one piece will be needed
used element
33,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7534

Lateral part of engine compartment, left side

Side plate of engine compartment driver side.
Preformed sheet metal part for welding. Inclusive flume, mounting bracket for head light and cable supports.
  • steel, basic colour, black
  • original spare part
85,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 405

Lateral part of engine compartment, right side

Side plate of engine compartment codriver side.
Preformed sheet metal part for welding. Inclusive flume, mounting bracket for head light and cable supports.
  • steel, basic colour, black
  • original spare part
85,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 406

middle front part

middle front part for Trabant 601 (2-stroke)

primed sheet metal part without additional units (lock for engine bonnet, radiator grill)
original-IFA-spare part
26,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6451

Screw for radiator cover

Stainless steel screw slotted for the aluminium cover front (radiator grill).
Best peplacement for the original one without corrosion.
Fit to all Trabant 601 and 1,1 all models also Kübel and Tramp.
Please note for the Trabant 601 Standard up to vintage 1970.
  • material: A2
  • head design: round-head tapping screw
  • six pieces will be needed
  • delivery inclusive washer ans nut
0,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7717

eyebolt for for grille assembly

Wing screw for mounting the grille assembly, fit to Trabant 601 and 1,1.
  • delivery without rubber ring
  • original spare part
  • two pieces will be needed
14,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 81

Rubber for eyebolt for for grille assembly

Rubber washer for the wing screw for mounting the grille assembly, fit to Trabant 601 and 1,1.
  • two pieces will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7279

Cover plate, left side

for Trabant 601
connection sheet between grille assembly and front wheel house (left hand)
incl. mounting point for bumper holder
  • material: formed metal plate
  • delivery: basic varnished black
  • made in EU
  • one piece will be needed
20,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 424

Cover plate, right side

for Trabant 601
connection sheet between grille assembly and front wheel house (right hand)
incl. mounting point for bumper holder
  • material: formed metal plate
  • delivery: basic varnished black
  • made in EU
  • one piece will be needed
20,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 425

Center part of grille assembly

Grille assembly center part. This part is an repair-profile for weling in to the car body between the two haed lamp holders front right and left hand.
  • matreial: profiled sheet steel
  • new produciton
  • fit to all Trabant 601 and Trabant 1,1
  • one piece will be needed
29,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 439

Grille assembly, complete

nach Verfügbarkeit lieferbar !
180,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 440

Mounting screw under frame

Mounting bolt for the connection between underframe and front transverse member.
Scope of delivery inclusive external teeth lock washer and nut.
  • grade: 10.9
  • surface: galvaniced
  • for the Trabant 500,600,601 will be 6 pieces needed
  • for the Trabant 1,1 will be four pieces needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6746

Under-frame

regenerated under-frame (sandblasted and varnished)

colour: black
159,33 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 445

Front transverse member

Front transverse member is welded across in front of the car. It is the girder for the engine-gearbox underfarme. At the side wall it is the connection to the side member left or right hand. The six holes for the underframe are not drilled.
Scope of delivery complete with two car-jack points (pipe D= 30mm, d= 25mm, L= 76mm)
fit to all Trabant 601.
  • coated with transport sealing varnish
  • made in Germany
  • one piece will be needed
365,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 441

Plastic protection, wire tap

Plastic hose to protect the electrical wires at the mounted metal taps at the car body. Trabant engine compartment, car boot, passenger room.
  • PVC, lack
  • price per meter
6,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7675
The complete offer in spare parts for the engine compartment Trabant 601

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas