This site in german: IFA-Fahrzeuge > Wartburg 311 / 312 / 313 > Motor 
You are here: > IFA-vehicles> Wartburg 311 / 312 / 313> Engine

Spare parts and supplies for the three cylinder two stroke engine around the models 311, 312, 313

The product category IFA-vehicles > Wartburg 311 / 312 / 313 > Engine is spread over 7 sites:

Upper sealing ring carburettor float case 24,2 x 29,8 x 1,5

Special made fiber sealing as single part for sealing the float case on top to the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 24,2mm
  • outside diameter: 29,8mm
  • thickness: 1,5mm
  • one piece will be needed
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8157

Lower sealing ring carburettor float case 20,2 x 25 x 1,5

Special made fiber sealing as single part for sealing the float case bottom side to the carburettor.(Screw)
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 20,2mm
  • outside diameter: 25mm
  • thickness: 1,5mm
  • one piece will be needed
2,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8158

Sealing ring carburettor blowpipe main jet 11 x 15 x 1,0

Special made fiber sealing as single part for sealing the brass blowpipe for the main jet to the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 11.1mm
  • outside diameter: 15,1mm
  • thickness: 1,0mm
  • one piece will be needed
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7974

Sealing ring carburettor air adjustment slide jet 8 x 11 x 1,0

Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor (left hand).
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 8,2mm
  • outside diameter: 11mm
  • thickness: 1,0mm
  • two pieces will be needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8170

Sealing ring carburettor air adjustment slide jet 6 x 9 x 1,0

Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor (right hand)
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • inside diameter: 6,1mm
  • outside diameter: 9mm
  • thickness: 1,0mm
  • one piece will be needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8171

Retainer for main jet, carburettor H 362

Holder for main jet of the carburettor type H 362-.
This is en new german reproduction. Nozzle threat M5.
Spanner gap SW14 and threat M11.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
  • delivery as single part
  • without jet and without sealing
  • material: brass
  • threat: M10x1
  • one piece will be needed
15,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8579

Sealing ring carburettor blowpipe jet

Special made rubber sealing as single part to seal the aluminuim blowpipe jet inside of the carburettor.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
size:
  • material: fuel resitant rubber
  • one piece will be needed
2,65 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8172

Float needle valve, carburettor H 362

Special made float needle valve for the carburettor type H 362-.
This is en new german reproduction.
Spanner gap SW14 and threat M12.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
  • delivery as single part
  • without without sealing
  • material: brass
  • threat: M12
  • one piece will be needed
27,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8586

Sealing for float needle valve, carburettor H 362

Special made fiber sealing ring for float needle valve (LDM-part-no.:8586) for the carburettor type H 362-.
This is en new german reproduction.
Useable for the carburettos of the fire fighter pump with ZW1103 engine, and the Carburettor types: H 362- of the cars Framo, Wartburg 311,312,313 and some boat engines with this type of carburettor.
  • delivery as single part
  • material: fiber sealing
  • one piece will be needed
3,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8619
The product category IFA-vehicles > Wartburg 311 / 312 / 313 > Engine is spread over 7 sites:
1234567
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas