This site in german: IFA-Fahrzeuge > Wartburg 311 / 312 / 313 > Motor 
You are here: > IFA-vehicles> Wartburg 311 / 312 / 313> Engine

Spare parts and supplies for the three cylinder two stroke engine around the models 311, 312, 313

The product category IFA-vehicles > Wartburg 311 / 312 / 313 > Engine is spread over 7 sites:

Exhaust manifold seal

Paper seal with dry graphite. It fit to all Wartburg 353, 312, 311 and B-1000 with 3-cylinder two stroke engine.
  • very good quality of material and with good dimension accuracy
  • without metall ring
  • inner diameter: 43 mm (1,693 inch)
  • three pieces will be needed
  • made in Germany (only available by LDM-Tuning)
3,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3011

Exhaust manifold seal with metall ring

Paper seal with dry graphite. It fit to all Wartburg 353, 312, 311 and B-1000 with 3-cylinder two stroke engine. Usefull for all tuning engines for example RS 1000, Leutert.
  • brilliant quality with metall ring
  • inner diameter: 45 mm
  • three pieces will be needed
  • made in Germany
8,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6706

Bolt for cylinder head

cylinder bols fit to:
  • Wartburg-353, 2-stroke, 3-cylinder,1000ccm or 1200ccm, 8 or 12 bolts
  • Wartburg-3112-stroke, 3-cylinder,900 or 1000ccm, 8 or 12 bolts
  • Barkas-B1000,2-stroke, 3-cylinder,1000ccm, 8 bolts
  • Framo 2-stroke, 3-cylinder 900ccm, 8 or 12 bolts



The tightening torque and the sequence of mounting of the cylinder head nuts you can find at (Details)
Special offer normaly 11,81 € now 8,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6931

Piston ring sealing crank shaft (W353/B1000)

Special piston ring for the sealing of the crank case. Can be mounted at the flywheel and the v-pully side, crankshaft with 45 hp or 50 hp.
  • fit to 2-stroke-engines of Wartburg 353 and Barkas B1000
  • 4 piece will be needed for each engine
13,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6903

safety plate flywheel (W353/B1000)

Locking plate for the five srews, which are necessary to mount the flywheel at crankshaft.
  • surface: galvanized with olive drap colour
  • fit to 2-stroke-engines of Wartburg 311, 312, 313, 353, Framo Barkas B1000
  • one piece will be needed for each engine
9,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 620

Special bolt flywheel (W353/B1000)

One-off-production of the hexagon screw for mounting the flywheel at the crankshaft.
  • tap: M8
  • spanner gap: 13
  • surface: galvanized
  • fit to 2-stroke-engines of Wartburg 311, 312, 313, 353, Framo, Barkas B1000
  • 5 pieces will be needed for each engine
6,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6904

safety plate beltwheel (W353/B1000)

Locking plate for the two srews, which are necessary to mount the beltwheel at crankshaft.
  • surface: galvanized
  • fit to 2-stroke-engines of Wartburg, Barkas B1000
  • one piece will be needed for each engine
2,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7154

Starter 6V

Starter for 6V vehicles.
Fit to the fallowing cars: Wartburg 311, 312, Framo und IFA F9
  • overhauled in Germany
  • your old starter have to be first shipped to our company for exchange
195,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6815

Sealing set Carburettor H362

Paper sealing kit for carburettor type H 362- for Framo, Wartburg 311, 312, 313 and some boat engines with this carburettor type.
Best use to refresh the carburettor. All parts are made from the orignial patterns and our own quality grade.
Set consist of:

  • one set will be needed
  • material: sealing paper, Vulkanfieber, fuel resistant rubber
  • high quality made in Germany
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8266
The product category IFA-vehicles > Wartburg 311 / 312 / 313 > Engine is spread over 7 sites:
1234567
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas