This site in german: IFA-Fahrzeuge > Multicar M25 
You are here: > IFA-vehicles> Multicar M25

Multicar M25

Category Multicar M25 has the following subcategorys:

The product category IFA-vehicles > Multicar M25 is spread over 5 sites:

Hose connector 19mm, universal

Universal useable plastic connection tube for coolant hoses.
Best use for reparations of demaged hoses or tuning and modifications z.B. Trabant with Wartburg engine or VW engines.
Easy to install, just push the two ends of the hoses at tube and fix it with two clamps.
technical details:
  • diameter: 19mm
  • lenght of the connection side: 32mm
  • legth total: 75mm
  • material: plastic, temperatur and oel restistant, whithe
3,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7432

compensating tank complete, universal

universal useable coolant bottle.
Scope of delivery complete with closure cap and integreated valve and switch for fluid lavel.
Two connections for the water hoses.
diamter connection down: 15mm
diamter connection on top: 8mm
Brillant replacement for the original spare part. Can be used for tuning and modificatios for example: Trabant with Wartburg engine or VW engines
41,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7430

Fog lamp angular

Rectangular fog light as very good replacement for the original lights.
High quality made in Germany.
The sizes agree with the genuine spare parts.
technical details:
  • voltage: 12V oder 24V, bulb type: H3
  • with E-mark
  • dimensions: 160mm x 90mm
  • scope of delivery without bulb, inclusive mounting parts
  • the case of the lamp is mad of plastic, black

Can be used for Trabant, Wartburg, B1000 und Multicar.
66,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7431

Mounting bolt fog lamp - car body

Hexagon screw inclusive spring washer and nut for mounting the fog lights at the car body.
Screw set made of stainless steel.
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.
  • Set is made of stainless steel
  • 1x screw, 1x nut und 1x spring ring
  • two sets will be needed
Fog lamp is not part of the delivery. Only for illustration
1,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8033

Mounting bolt fog lamp - clamp

Hexagon screw inclusive spring washer and nut for mounting the fog lights at the adjustment clamp.
Screw set made of stainless steel.
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.
  • Set is made of stainless steel
  • 1x screw, 1x nut und 1x spring ring
  • two sets will be needed
Fog lamp is not part of the delivery. Only for illustration
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8032

Rubber plug for fog lamp

Rubber seal for the connection wire of the front fog lights.
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.
  • delivery as an single part
  • material: rubber, black
Fog lamp is not part of the delivery. Only for illustration
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8031

Ring eye D12mm, connection 6mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 6mm
4,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7539

Ring eye D12mm, connection 8mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 8mm
5,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7540

Ring eye D12mm with pipe bend

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 8mm
  • pipe bend: 90 degree
  • pipe length total: 74mm
15,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7517
The product category IFA-vehicles > Multicar M25 is spread over 5 sites:
12345
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas