Multicar M25

Category Multicar M25 has the following subcategorys:

The complete offer in Multicar M25

Brake line front, fit to Multicar M25 4WD

Brake pipe made of NiCu form the front wheel brake cylinder to the brake hose.
Can be used for the front wheel brake system of the Multicar type M25wit VW engine and four wheel drive.

delivery complete with nuts M12x1
made in Germany
for one vehicle four pieces will be needed

19,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7814

Wheel brake cylinder front, fit to Multicar M25, overhauled

Detail

In germany refreshed brake cylinder can be used for the front wheel brake system of the Multicar type M25.
The wheel brake cylinders fit to the brakes of the right and left front axle.

delivery as an single part inclusive bleeder screw
overhauled in Germany
for one vehicle four pieces will be needed

Please note: Only direct exchenge possible.Please send your old overhaulable brake cylinder LZ65 to our company in advance !

36,06 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7773

Wheel brake cylinder front, fit to Multicar M25

Detail

Brake cylinder can be used for the front wheel brake system of the Multicar type M25.
The wheel brake cylinders fit to the brakes of the right and left front axle.

delivery as an single part inclusive bleeder screw
made in EU
for one vehicle four pieces will be needed

36,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7585

Wheel brake cylinder rear, fit to Multicar M25

Detail

Reproducted brake cylinder can be used for the rear wheel brake system of the Multicar type M25.
The wheel brake cylinders fit to the brakes of the right and left rear axle.

delivery as an single part
made in EU
for one vehicle four pieces will be needed

32,08 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7586

Brake hose rear, fit to Multicar

Detail

Wheel brake hose for the rear brake system of the Multicar type M22, M24, M25.
Connection hose between the brake pipe and the wheel brake cylinder rear axle.

total lenght: 51cm
thread: M12x1, both ends as male type
delivery as an single part
made in EU
for one vehicle two pieces will be needed

13,30 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7641

Brake shoe set for Multicar M25

Detail

The brake shoes kit fit to the frontaxle and to the rear axle of the Multicar type M25 without 4 wheel drive.
Set consist of:

4 pieces of breake shoe with long lining
made in EU
for each axle, one set will be needed

52,06 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7096

Brake shoe set front axle Multicar M25 4WD

Detail

The brake shoes are complete overhauled in Germany
Fit to the front axleof the Multicar type M25 with 4 wheel drive.
Set consist of:

4 pieces of breake shoe with long lining
made in Germany

Please note: the old breake shoes have to be shiped to our compaly in advance.

only exchenge part !

244,76 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7800

Fuel pump for Multicar M25

Detail

Mechanical fuel pump for the engine of the Multicar type M25.

delivery as an complete unit, inclusive connection screws
made in EU
one piece will be needed

53,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7679

Starter for Multicar M25

Detail

Starter fit to the following cars: Multicar M25

power: 2,2kW (3,0 hp)
overhauled in Germany
your old starter have to be first shipped to our company for exchange

genuine part number: 8202.10/2

195,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7218

Bering for outer rear view mirror, high quality Detail Mirror in high quality, inclusive mounting clamp. material: PVC, black, shock proof with rubber edge care side: right / left hand mountable delivery inclusive arched plate glass for the best rear view. made in Germany fit to Barkas B1000 and B1000-1 and Multicar M25
39,41 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7100

Wiper arm for M24/25 Detail Wiper arm as a single part fit to the Multicar type M24 and M25. Delivery without mounting parts.
Original spare part number 8746.38/141	18,03 €inclusive VAT, plus shipping costs temporary not available Art.No. 8007

Wiper blade set for M24/25 Detail Wiper blade kit (two pieces) fit to the Multicar type M24 and M25. New reproduction in best quality. Delivery without mounting parts.
29,08 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 8018

Wiper linkage for M25 Detail Wiper linkage fit to the Multicar type M25. Delivery inclusive mounting plate. original spare part.
Original spare part number 8746.59/12	37,79 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 8003

Rubber sealing cap for front direction indicator lamp (P50/P60/B1000/Multicar) Detail New produced sealing cap fit to old front flasher lights of Trabant 500 and 600 (P50/60), Barkas B1000 and Multicar truck and fit to Wartburg 311,312,313 and Framo, and fit to the side lights of the camp trailer INTERCAMP.
9,33 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7250

Rubber cover for ignition key

Detail

Grip rubber for mounting at the ignition key.
This spare part is an original one.
Fit for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.

material: rubber, black
original spare parts
delivery as an single part

9,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8193

Delivery only at advance payment.

Spare key, copy is made from yor key number

Detail

Production of an spare key for door, ignition or fuel cap looks and so on...
You have to tell us your key number per email, fax or letter.
Keys for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.

delivery time about one to two weeks
all Trabant 601 / Trabant 1,1, Wartburg 353 / Wartburg 1,3 and Brakas B1000/ B100-1 keys possible

Please write here your keynumber in:
Reproduction time for key ca. 2-3 Wochen !!!nfertigung auf Kundenwunsch, KEINE Rücknahme, Umtausch oder Stornierung / Widerruf nach Zahlungseingang!

29,75 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1341

Delivery only at advance payment.

Cap for water vessel for windscreen washer system Detail Plastic cap with mounting sprap for the water bottle of the windscreen washer system. The plug close up the refilling hole. To use at many reservoir bottles with electrical or mechanical pump. fit to follow washer systems: Trabant 601, Trabant 1.1, Wartburg 1.3, Wartburg 353, Multicar, W50 and so on
4,75 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7357

Protection cap for starter lite ( plastic )

Detail

Sealing cap to protect the starter wire (plus) against dust and moisture.
Fit to the vehicles: P70, Trabant, Wartburg, Multicar, Framo and Barkas.

made in Germany
one piece will be needed

6,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 786

Hose connector 19mm, universal

Detail

Universal useable plastic connection tube for coolant hoses.
Best use for reparations of demaged hoses or tuning and modifications z.B. Trabant with Wartburg engine or VW engines.
Easy to install, just push the two ends of the hoses at tube and fix it with two clamps.
technical details:

diameter: 19mm
lenght of the connection side: 32mm
legth total: 75mm
material: plastic, temperatur and oel restistant, whithe

3,18 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7432

compensating tank complete, universal

Detail

universal useable coolant bottle.
Scope of delivery complete with closure cap and integreated valve and switch for fluid lavel.
Two connections for the water hoses.
diamter connection down: 15mm
diamter connection on top: 8mm
Brillant replacement for the original spare part. Can be used for tuning and modificatios for example: Trabant with Wartburg engine or VW engines

41,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7430

Fog lamp angular

Detail

Rectangular fog light as very good replacement for the original lights.
High quality made in Germany.
The sizes agree with the genuine spare parts.
technical details:

voltage: 12V oder 24V, bulb type: H3
with E-mark
dimensions: 160mm x 90mm
scope of delivery without bulb, inclusive mounting parts
the case of the lamp is mad of plastic, black

Can be used for Trabant, Wartburg, B1000 und Multicar.

66,22 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7431

Mounting bolt fog lamp - car body

Detail

Hexagon screw inclusive spring washer and nut for mounting the fog lights at the car body.
Screw set made of stainless steel.
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.

Set is made of stainless steel
1x screw, 1x nut und 1x spring ring
two sets will be needed

Fog lamp is not part of the delivery. Only for illustration

1,84 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8033

Mounting bolt fog lamp - clamp

Detail

Hexagon screw inclusive spring washer and nut for mounting the fog lights at the adjustment clamp.
Screw set made of stainless steel.
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.

Set is made of stainless steel
1x screw, 1x nut und 1x spring ring
two sets will be needed

Fog lamp is not part of the delivery. Only for illustration

1,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8032

Rubber plug for fog lamp

Detail

Rubber seal for the connection wire of the front fog lights.
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.

delivery as an single part
material: rubber, black

Fog lamp is not part of the delivery. Only for illustration

0,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8031

Ring eye D12mm, connection 6mm hose

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm

Eye diameter: 12mm
diameter pipe connection: 6mm

4,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7539

Ring eye D12mm, connection 8mm hose

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm

Eye diameter: 12mm
diameter pipe connection: 8mm

5,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7540

Ring eye D12mm with pipe bend

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm

Eye diameter: 12mm
diameter pipe connection: 8mm
pipe bend: 90 degree
pipe length total: 74mm

15,38 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7517

Ring eye D10mm, connection 6mm hose

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm

Eye diameter: 10mm
diameter pipe connection: 6mm

4,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7537

Ring eye D10mm with pipe bend

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm

Eye diameter: 10mm
diameter pipe connection: 6mm
pipe bend: 90 degree
pipe length total: 55mm

14,99 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7516

Ring eye D10mm, connection 8mm hose

Detail

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm

Eye diameter: 10mm
diameter pipe connection: 8mm

4,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7538

plate glass for rear-view mirror

Detail

plate glass for the outer rear-view mirrors of Barkas B1000 and Multicar M25

domed mirror glass
height: 240 mm (highest extent)
width: 156 mm (wides extent)
symmetrical outlines (no conical outlines

Please check the dimension of your mirror, because differnt types of mirrors were mounted in the past.

19,63 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6627

Brake hose front axle for Multicar

Detail

Wheel brake hose for the front brake system of the Multicar type M22, M24, M25 (not useable for M25 4WD).
Connection hose between the brake pipe and the wheel brake cylinder front right or left axle side.

total lenght: 51cm
thread: 1x M12 x 1,5 core thread
1x M12 x 1,5 male thread
delivery as an single part
made in EU
for one vehicle two pieces will be needed

14,51 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7518

Brake hose front axle for Multicar 4WD

Detail

Wheel brake hose for the front brake system of the Multicar type M24, M25 four wheel drive.
Connection hose between the brake pipe and the wheel brake cylinder front right or left axle side.

total lenght: 51cm
thread: 2x M12 x 1,5 core thread (female)
delivery as an single part
made in EU
for one vehicle two pieces will be needed

14,51 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8083

Fuel tank plug for Multicar M24 / M25 Detail Lockable fuel plug made of steel, polished. High quality sparepart with ventilation. Delivery inclusive rubber sealing and two keys. Made in Germany.
33,00 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7731

LED Headlamp insert

Detail

LED Headlight as an complete unit.
Best replacement for the H4 or R2 headlights. Brilliant light quality !!!
Fit to Trabant, Trabant 1.1, Baraks B1000, Barkas B1000-1, W50, Multicar, MZ motorbikes.

scope of delivery: inclusice LEDs
price per piece!
electrical power: 12V

585,44 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8132

Hand brake cable for Multicar M25

Detail

This brake wire fit to Multicar type M25.
New reproduction made in EU

length total: 87cm
length of bowden wire: 54cm
two pieces will be needed

25,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8362

Insert for fuel pump

Detail

Plasic insert with filter metal for mounting inside of the fuel pump (part.-no.:7679)
Fit for the engines of the Multicar type M25.

delivery as single part
made in EU
one piece will be needed

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8382

Filter cap for fuel pump

Detail

Plasic filter cap for mounting at the fuel pump (part.-no.:7679)
Fit for the engines of the Multicar type M25.

delivery as single part
made in EU
one piece will be needed

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8383

Plastic retainer for fog lamp

Detail

Retainer for install and adjust the round fog lamps.
New production, made in Germany
Fit to the round models of the DDR produced fog lamps like at the example picture is shown.

delivery as an single part
material: plasic, black
unwrought spare part
two pieces will be needed

Fog lamp is not part of the delivery. Only for illustrationunwrought spare part

8,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8387

Oldtimer fog lamp (round)

Detail

One set of retro round fog lamps.
Best use for oldtimer and youngtimer.

Delivery as set (2 pieces)
rear cover: made of plasic,black
Lieferung inklusive Leuchtmittel und Dichtungen
one kit will be needed

For use at the Trabant you have to order the set of reatinerfor fog lamp, LDM-part.no.: 8389 separatly.

106,74 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 8388

The complete offer in Multicar M25

* All prices inclusive VAT and plus shipping costs.