This site in german: Wartburg 1.3 > Ersatzteile > Motor > Zylinderkopf 
You are here: > Wartburg 1.3> Spare parts> Engine> Cylinder head
Navigation

Engine spare parts and

The product category Wartburg 1.3 > Spare parts > Engine > Cylinder head is spread over 4 sites:

1234
Show all products

Inlet valve

Inlet valve is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
  • Length: 99,3 mm
  • three grooves
  • For one 4-cylinder-engine of Trabant or Wartburg will be needed 4 pieces.
21,66 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6855

Exhaust valve

Exhaust valve is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
  • Length: 99,3 mm
  • three grooves
  • For one 4-cylinder-engine of Trabant or Wartburg will be needed 4 pieces.
28,91 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6856

Hydro cam follower

Hydro cam follower ist fito to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 and many other car models made by VW or Audi.

Technical data:
  • Outer diameter: 35 mm
  • Height: 26 mm
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces

If you can hear rattle for a while after starting the cold engine, mostly the hydro cam follower are worned out.
replaces no.: 034 109 309 AD
12,73 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 6831
Delivery only at advance payment.

Cylinder head packing

Can be used for Trabant 1.1 and Wartburg 1.3 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
If the cylinder head packing will be replaced, you should use new expansion bolts as well!
  • one piece will be needed
17,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 632

Cylinder head packing * REINZ *

Can be used for Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
Manufacturer: VIKTOR REINZ Germay
If the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed
42,89 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 8198

Cylinder head packing * ELRING *

Can be used for Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
Manufacturer: ELRING
If the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed
39,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6327

Set of bolts for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • set consists of 10 pieces
  • for true order of bolt tighten please see details
  • one set will be needed
priece for each one: 3,53 Euro
35,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7360

Bolt for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • for true order of bolt tighten please see details
  • 10 piecse will be needed
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6407

Seal for valve control machanisim cover *ELRING*

Sealing made of rubber can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
  • best quality made by Elring
  • one piece will be needed
14,16 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6392

Seal set for valve control machanisim cover *ELRING*

This seal kit can be used for Trabant 1.1 and Wartburg 1.3 or Barkas B100-1 (4-stroke engine)
  • This set contains the with additional three rubber sleeves for mounting screws
  • Material: Öl-restisrant rubber
  • made by ELRING
  • one set will be needed
17,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6393
Delivery only at advance payment.
The product category Wartburg 1.3 > Spare parts > Engine > Cylinder head is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas