This site in german: Wartburg 1.3 > Ersatzteile > Motor > Zylinderkopf 
You are here: > Wartburg 1.3> Spare parts> Engine> Cylinder head

Engine spare parts and

The complete offer in Engine spare parts and

Radial sealing for camshaft and crankshaft ( 32 x 47 x 10) with dust lip *ELRING*

radial sealing for camshaft and one side (side of belt) of crankshaft
fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
Made by ELRING

Best available type of Radial sealing 32 x 47 x 10 with additional dust lip, dual spin and higher working temperatur range.
  • inner diameter: 32 mm
  • outer diameter: 47 mm
  • width: 10 mm
  • material: Viton/Polyacryl-rubber
13,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6341

Radial sealing for camshaft and crankshaft( 32 x 47 x 10)

radial sealing for camshaft of Trabant 1.1 and Wartburg 1.3
The simplest and cheapest typ WITHOUT dust lip.
  • size: 32x47x10
  • made in Germany
5,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 629

Radial sealing for camshaft and crankshaft ( 32 x 47 x 10) with dust lip

radial sealing for camshaft and one side of crankshaft of Trabant 1.1 and Wartburg 1.3
more professional type of Art.No.629 (Radial sealing for camshaft (32 x 47 x 10)) with additional dust lip
  • size: 32x47x10
  • made in Germany
9,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6340

Valve chocks (1 pair)

Valve chock is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.

One pair of these valve chocks is fit to one valve with three grooves.
For one 4-cylinder-engine of Trabant or Wartburg will be needed 16 pieces.
2,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6854

Spring cup seat for Valve

Spring cup for the inlet and the exhaust valve of the 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
Technical data:
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces
9,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7132

Valve guide

Valve guide is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.

Technical data:
  • Outer diameter: 12 mm
  • Inner diameter: 7,8 mm
  • Length: 36,5 mm
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces
3,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6853

Valve spring inner side

Insert spring (valve) is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
Fit to the inlet and the exhaust valves
Technical data:
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces
8,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7130

Valve spring outside

Insert spring (valve) is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
Fit to the inlet and the exhaust valves
Technical data:
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces
10,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7131

valve stem sealing

Valve stem sealing can be used for Trabant 1.1 and Wartburg 1.3 with 4 stroke four cylinder motor.

If oil consumtion of engine is to much the wastage of valve stem sealings can be the reason.
8 pieces will be needed for one complete cylinder head (10 valves)
2,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6852

Inlet valve

Inlet valve is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
  • Length: 99,3 mm
  • three grooves
  • For one 4-cylinder-engine of Trabant or Wartburg will be needed 4 pieces.
21,66 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6855

Exhaust valve

Exhaust valve is fit to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and many other car models made by VW or Audi.
  • Length: 99,3 mm
  • three grooves
  • For one 4-cylinder-engine of Trabant or Wartburg will be needed 4 pieces.
28,91 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6856

Hydro cam follower

Hydro cam follower ist fito to 4-stroke engines of Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 and many other car models made by VW or Audi.

Technical data:
  • Outer diameter: 35 mm
  • Height: 26 mm
  • for one 4-cylinder-engine of Trabant or Wartburg will be needed 8 pieces

If you can hear rattle for a while after starting the cold engine, mostly the hydro cam follower are worned out.
replaces no.: 034 109 309 AD
12,73 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6831

Cylinder head packing

Can be used for Trabant 1.1 and Wartburg 1.3 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
If the cylinder head packing will be replaced, you should use new expansion bolts as well!
  • one piece will be needed
17,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 632

Cylinder head packing * REINZ *

Can be used for Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
Manufacturer: VIKTOR REINZ Germay
If the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed
28,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8198

Cylinder head packing * ELRING *

Can be used for Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.
Manufacturer: ELRING
If the cylinder head packing will be changed, you need new expansion bolts as well!
  • one piece will be needed
39,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6327

Set of bolts for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • set consists of 10 pieces
  • for true order of bolt tighten please see details
  • one set will be needed
priece for each one: 3,53 Euro
35,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7360

Bolt for cylinder head

Expansion bolt can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with 4 stroke four cylinder motor.
It differs the motor just at the displacement of piston.

if the cylinder head packing will be changed, you need new expansion bolts as well!
  • inclusive ring washer
  • for true order of bolt tighten please see details
  • 10 piecse will be needed
4,53 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6407

Seal for valve control machanisim cover *ELRING*

Sealing made of rubber can be used for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
  • best quality made by Elring
  • one piece will be needed
14,16 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6392

Seal set for valve control machanisim cover *ELRING*

can be used for Trabant 1.1 and Wartburg 1.3

with additional three rubber sleeves for mounting screws
17,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6393

Seal for valve control machanisim cover

Simple kind of Sealing.
It can be used for Trabant 1.1 and Wartburg 1.3
Made in EU
8,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 633

Valve cover

Original IFA metal cam cover for all four stroke motors of the vehicles Trabant 1,1, Wartburg 1,3 and Barkas B1000-1.
This valve cover is mounted on top of the engine and prevent oil leaking of the rotary Valve drive.
The cover is painted with the original coulour (gray) inclusive pressed IFA trade mark.
Best use for olditmer fans and original restoration.
  • delivery as an single part without mounting bits
  • original spare part
  • one piece will be needed
52,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8269

Threaded coupling for valve control machanisim cover (oil fill in hole)

Plastic plug for the metal valve cover.
This plug got an bayonet thread for quick opening and closing after oil fill in.
Fit to the cam covers of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
  • made by german producer
  • material: plasticf-metal
  • delivery inclusive rubber sealing
  • one piece will be needed
6,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6217

Pin bolt for suction pipe

Connection between cylinder head and suction pipe.,
  • delivery as single part
  • dimension: M8 x 42mm
  • threat lenght 1: about 16mm
  • threat lenght 2: about 19mm
  • High quality made in Germany
  • fit for Trabant 1,1 all types, Wartburg 1,3 all types and Barkas B1000-1
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7667

Sealing for suction pipe, Elring

Spezail seal made of steel. Mounting between suction pipe and engine block.
This sealing is made of one piece for all four cylinders.
Fir for the Trabant 1,1 engine with 1100cccm and for Wartburg / Barkas B1000-1 engines with 1300ccm.
  • Manufacturer: ELRING
  • fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1
  • one piece will be needed
8,03 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 758

Suction pipe

Intake manifold with water cooling ports for the Trabant 1,1 and Wartburg 1,3 with carburettor engines. delivery without any mounting parts, seals ec.
  • Suction for all cylinders 1 in 4
  • material: aluminium
  • made in Germany
  • one piece will be needed
95,01 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 759

Toothed belt 108 / 19,1

The toothed belt fit to Trabant 1,1 and Wartburg 1,3 and Barkas B1000-1 as well.
The timing belt will be delivered as an single part, without any mounting parts.
  • wide: 19,1mm (3/4 inch)
  • count of teeth: 108
17,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1107

Crankshaft gear

Crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
72,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7262

Bolt for crankshaft gear

High grade special bolt for the mounting of the crankshaft gear for toothed belt. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • one piece will be needed
  • made in Germany
5,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7482

Bolt for V-pully crankschaft

Bolt with hexagon socket for the mounting of the V-pully at the crankshaft gear for toothed belt.
Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • four pieces will be needed
  • made in Germany
2,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7484

Camshaft timing gear

Timing gear for toothed belt camshaft. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
52,22 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7261

Exhaust manifold seal

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
reduced from 5,64 € to 4,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 31

Exhaust manifold seal with meatl ring

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • made in Germany by Elring
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
Special offer normaly 18,77 € now 16,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6260

Pin bolt for exhaust maifold

1,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7668

exhaust nut, copper plated

Secure nut for the Trabant manifold. Surface is plated with coper.
  • thread: M8
  • spanner: SW12
0,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7304

exhaust nut with collar, copper plated

Secure nut for the Trabant manifold. Surface is plated with coper.
Use for mounting without washer.
  • thread: M8
  • spanner: SW132
  • grate: 8.8
  • collar diameter: 17,3mm
  • highness: 9,2mm
0,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7305

Sealing for suction pipe, Reinz

Spezail seal made of steel. Mounting between suction pipe and engine block.
This sealing is made of one piece for all four cylinders.
Fir for the Trabant 1,1 engine with 1100cccm and for Wartburg / Barkas B1000-1 engines with 1300ccm.
  • Manufacturer: Reinz
  • fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1
  • one piece will be needed
3,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8328
The complete offer in Engine spare parts and

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas