This site in german: Wartburg 1.3 > Ersatzteile > Motor > Kupplung 
You are here: > Wartburg 1.3> Spare parts> Engine> clutch system

clutch and clutch kits

The product category Wartburg 1.3 > Spare parts > Engine > clutch system is spread over 2 sites:

clutch spare parts for Wartburg 1.3 (4-stroke)

Information about the deposit:

The clutch and clutch disc are to exchange for the old one, to enable the overhauling. There are two possibilties to get these clutch parts.
(1) The old cluch and/or clutch disc (worned out) are to ship to us before we ship the new one (after an acknowledged order).
(2) You have to pay additional money (deposit for old clutch + clutch disc) in your invoice. After you shipped back these parts to us, the money will be transfered back to your account. Please put a slip of paper with your customer no., invoice no. and your (international) bank account details or better your email address of PayPal account on it into the parcel (Or tell us this informations by email). You have to pay the shipping costs for yourself.

Info:

Particularly if clutch and release bearing were not exchanged during the last changes of clutch disc it is recommend to change all three components of clutch system. The reliabilty will be higher and additional wasteful reparations are not necessary.
As a general rule it is recommend to change the clutch and release bearing, too if clutch disc is changed.
The compressive force of disk spring of clutch will be lower in process of time. The disk spring can broke easier.
The main unit of release bearing is the ball bearing. This part wears out too especially if sealing of the bearing is damaged. So the clutch dust can invade and the bearing wears out faster.

Clutch set W1.3

If the clutch slips during driving with 3. or 4. gear, the clutch components have to change.

This clutch set fits to all variants of Wartburg 1.3 (with 4-stroke engine).

content:

  • 180mm clutch
  • 180mm cluch disc with springs
  • release bearing

All parts are made or overhauled in Germany.
For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
221,70 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6561

Clutch W1.3

Clutch (pressure plate with disk spring)
only fit to Wartburg 1.3 (4-stroke engine)
For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
123,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3103

Cluch disc, full elastic T1.1 / W1.3

Complete in Germany overhauled full elastic clutch disc (with springs). High quality friction surface.

fit to follow vehicles (all 4-stroke):
- Trabant 1.1
- Wartburg 1.3
This spare part is complete overhauled in Germany.
Please send your clutch and clutch disc in advance to our company for reparing.
  • delivery as single part
  • diameter: 180mm
  • refreshed in Germany
Overhaul part, please send the clutch disc in advance to our company
127,66 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 672

Slip ring disengager (4-stroke)

slip ring disengager fit for follow vehicles:
  • Trabant 1.1: all models
  • Wartburg 1.3: all models
  • B1000 (2-stroke): from 03/1985 onwards
  • B1000-1 (4-stroke): all models
34,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 680

Spring for clutch release bearing from 6/85

Snap clamp for mounting the pressure bearing at the release shaft.
Fir to the following car types:
Wartburg 353 ab 6-1985 Limousine and Tourist
Trabant 1,1 without vintage limit Kombi and Limousine
Wartburg 1,3 without vintage limit Tourist and Limousine
Barkas B1000 ab 3-85 with clutch D=200mm
Barkas B1000-1 without vintage limit
2,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7328

Cluch cable complete (W1.3)

bowden cable for slip ring disengager of clutch
  • length total: 66 cm
  • length of cable hull: 47,5 cm
  • made in Euope
Made in EU
32,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3111

sleeve for cluch cable

sleeve for clutch cable of Wartburg 353 (2-stroke) and Wartburg 1.3 (4-stroke)
  • length: 90mm
  • lenght (short): ca. 55mm
  • inner diameter big: 12mm
  • inner diameter small: ca. 6mm


Subject to availability (no regular range)!
8,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6370

Brake-cleaner, one packing unit, 12x Sprayer 600ml

Complete packing unit quick-cleaner for brake and clutch parts
  • FCKW free
  • content: 12x sprayer with volume of 600 ml
That implies a price of a single sprayer of 2,65 €price 4,42 Euro / liter
31,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7033

brake-cleaner 600ml

quick-cleaner for brake and clutch parts
  • FCKW free
  • volume: 600 ml
  • type: AD
  • delivery as an single spray
price 5,35 Euro / liter
3,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6252
The product category Wartburg 1.3 > Spare parts > Engine > clutch system is spread over 2 sites:
12
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas