This site in german: Wartburg 1.3 > Ersatzteile > Hinterachse 
You are here: > Wartburg 1.3> Spare parts> rear axle
Navigation

rear axle

The product category Wartburg 1.3 > Spare parts > rear axle is spread over 5 sites:

12345
Show all products

Telescopic shock absorber, W1,3 - rear axle

Buffer for the Wartburg 1,3 rear axle with coil spring. Fit to both typs: Limousine and Tourist from vintage: 1988 onwards.
  • scope of delivery inclusive bushing
  • made in Germany
  • 2 pieces will be needed
97,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6064

Spring for rear axle W1,3 (Limousine)

Coil spring for the rear axle of car body variante: limousine
Fit to Wartburg 1,3.
  • size: midle diameter of the coil: 111 mm, total lenght of the unencumbered spring: 360 mm, wire diameter: 14mm, count of coils: 8,5
  • made in Germany
  • two pieces will be needed
83,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7666
Delivery only at advance payment.

Spring for rear axle (Tourist, Camping)

Coil spring for the rear axle of car body variante: estate car
Fit to Wartburg 353 and 1,3 Tourist and Wartburg 312 Camping.
  • size: midle diameter of the coil: 111 mm, total lenght of the unencumbered spring: 350 mm, wire diameter: 15mm, count of coils: 8,5
  • made in Germany
  • two pieces will be needed
95,59 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6065
Delivery only at advance payment.

Rubber sleeve cushion for shock absorber 30mm

The bushing is pressed in to the eye of the shock absorber diameter size 30mm.
Fit to Trabant 500,600,601 leaf spring shocks or Wartburg 311/312/353, DDR trailers shocks and so on...
  • 1x length inner sleeve: 32 mm
  • 1x rubber
  • made in Germany
  • 2 or 4 pieces will be needed
12,90 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 8028
Delivery only at advance payment.

Shock absorber for spring for rear axle (Tourist, Camping) 20% bonded

Spezial produced shock absorber for using the coil spring 20% boosted.
Fit for the rear axle of car body variante: estate car
Fit to Wartburg 353 and 1,3 Tourist and Wartburg 312 Camping.
  • made in Germany
  • two pieces will be needed
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.
117,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8201

Spring for rear axle (Tourist, Camping) 20% bonded

Spezial produced coil spring for the rear axle of car body variante: estate car
Fit to Wartburg 353 and 1,3 Tourist and Wartburg 312 Camping.
  • size: midle diameter of the coil: 111 mm, total lenght of the unencumbered spring: 355 mm, wire diameter: 16 mm, count of coils: 8
  • made in Germany
  • two pieces will be needed
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen. Bitte beachten: Der Verkauf erfolgt ausschließlich für Sportzwecke, keine Bauartgenehmigung!
98,21 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6689

Form ring 20mm for Spring, rear axle

Rubber form ringfor the coil spring for the Wartburg 353 and 1,3 rear axle (Wartburg 312).
This form ring is about 20mm thickness.
Plaese check at your Wartburg before, which ring is mounted!
Fit to both typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 20mm
  • made in Germany
  • 2 pieces will be needed
23,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8648

Form ring 25mm for Spring, reart axle

Rubber form ringfor the coil spring for the Wartburg 353 and 1,3 rear axle (Wartburg 312).
This form ring is about 25mm thickness.
Plaese check at your Wartburg before, which ring is mounted!
Fit to both typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 25mm
  • made in Germany
  • 2 pieces will be needed
24,75 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8649

Wheel nut AM 12 x 1,5 cone collar

cink-coated wheel nut with cone collar for Trabant, Wartburg and all other vehicles with same bolts
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
  • replacement for original wheel nut with high quality
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6338

Wheel nut set, AM 12 x 1,5 cone collar

One set of cink-coated wheel nut with cone collar for Trabant, Wartburg and all other vehicles with same bolts.
Kit consists of 16 pieces.
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
  • replacement for original wheel nut with high quality
1,25 € per piece
20,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7498
The product category Wartburg 1.3 > Spare parts > rear axle is spread over 5 sites:
12345
Show all products
Wir versenden mit DHL.
Banküberweisung
PayPal
SEPA-Lastschrift
© 2003 - 2026 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas