This site in german: Wartburg 1.3 > Ersatzteile > Hinterachse 
You are here: > Wartburg 1.3> Spare parts> rear axle
Navigation

rear axle

The complete offer in rear axle

Telescopic shock absorber, W1,3 - rear axle

Buffer for the Wartburg 1,3 rear axle with coil spring. Fit to both typs: Limousine and Tourist from vintage: 1988 onwards.
  • scope of delivery inclusive bushing
  • made in Germany
  • 2 pieces will be needed
97,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6064

Spring for rear axle W1,3 (Limousine)

Coil spring for the rear axle of car body variante: limousine
Fit to Wartburg 1,3.
  • size: midle diameter of the coil: 111 mm, total lenght of the unencumbered spring: 360 mm, wire diameter: 14mm, count of coils: 8,5
  • made in Germany
  • two pieces will be needed
83,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7666

Spring for rear axle (Tourist, Camping)

Coil spring for the rear axle of car body variante: estate car
Fit to Wartburg 353 and 1,3 Tourist and Wartburg 312 Camping.
  • size: midle diameter of the coil: 111 mm, total lenght of the unencumbered spring: 350 mm, wire diameter: 15mm, count of coils: 8,5
  • made in Germany
  • two pieces will be needed
95,59 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6065
Delivery only at advance payment.

Rubber sleeve cushion for shock absorber 30mm

The bushing is pressed in to the eye of the shock absorber diameter size 30mm.
Fit to Trabant 500,600,601 leaf spring shocks or Wartburg 311/312/353, DDR trailers shocks and so on...
  • 1x length inner sleeve: 32 mm
  • 1x rubber
  • made in Germany
  • 2 or 4 pieces will be needed
12,90 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 8028
Delivery only at advance payment.

Shock absorber for spring for rear axle (Tourist, Camping) 20% bonded

Spezial produced shock absorber for using the coil spring 20% boosted.
Fit for the rear axle of car body variante: estate car
Fit to Wartburg 353 and 1,3 Tourist and Wartburg 312 Camping.
  • made in Germany
  • two pieces will be needed
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen.
117,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8201

Spring for rear axle (Tourist, Camping) 20% bonded

Spezial produced coil spring for the rear axle of car body variante: estate car
Fit to Wartburg 353 and 1,3 Tourist and Wartburg 312 Camping.
  • size: midle diameter of the coil: 111 mm, total lenght of the unencumbered spring: 355 mm, wire diameter: 16 mm, count of coils: 8
  • made in Germany
  • two pieces will be needed
Bitte beachten:Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen.Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.Das Wiedererlangen dieser, kann nur durch Vorstellung bei einer autorisierten Kontrollbehörde wie TÜV oder DEKRA durch Erstellen einer Einzelbetriebserlaubnis nach §21 erfolgen. Bitte beachten: Der Verkauf erfolgt ausschließlich für Sportzwecke, keine Bauartgenehmigung!
98,21 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6689

Form ring 20mm for Spring, rear axle

Rubber form ringfor the coil spring for the Wartburg 353 and 1,3 rear axle (Wartburg 312).
This form ring is about 20mm thickness.
Plaese check at your Wartburg before, which ring is mounted!
Fit to both typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 20mm
  • made in Germany
  • 2 pieces will be needed
23,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8648

Form ring 25mm for Spring, reart axle

Rubber form ringfor the coil spring for the Wartburg 353 and 1,3 rear axle (Wartburg 312).
This form ring is about 25mm thickness.
Plaese check at your Wartburg before, which ring is mounted!
Fit to both typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 25mm
  • made in Germany
  • 2 pieces will be needed
24,75 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8649

Wheel nut AM 12 x 1,5 cone collar

cink-coated wheel nut with cone collar for Trabant, Wartburg and all other vehicles with same bolts
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
  • replacement for original wheel nut with high quality
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6338

Wheel nut set, AM 12 x 1,5 cone collar

One set of cink-coated wheel nut with cone collar for Trabant, Wartburg and all other vehicles with same bolts.
Kit consists of 16 pieces.
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
  • replacement for original wheel nut with high quality
1,25 € per piece
20,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7498

Wheel nut set AM 12 x 1,5 cone collar, covered

One set of cink-coated wheel nut with bigger cone collar. The nut end is closed an cover the bolt against dirt and water. Usefull for Trabant, Wartburg and all other vehicles with same bolts.Extended hexagon.
One kit consist of 16 pieces.
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
1,69 € per piece
26,99 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 7499
Delivery only at advance payment.

Wheel nut set, AM 12 x 1,5 cone collar

One set of cink-coated wheel nut with bigger cone collar for Trabant, Wartburg and all other vehicles with same bolts.Extended hexagon.
One kit consist of 16 pieces.
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
1,69€ per piece
26,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7500

Wheel nut AM 12 x 1,5 cone collar

cink-coated wheel nut with bigger cone collar for Trabant, Wartburg and all other vehicles with same bolts
extended hexagon
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
2,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6339

Wheel nut AM 12 x 1,5 cone collar, covered

Cink-coated wheel nut with bigger cone collar. The nut end is closed an cover the bolt against dirt and water. Usefull for Trabant, Wartburg and all other vehicles with same bolts
extended hexagon
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
2,10 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 7297
Delivery only at advance payment.

wheel bolt 80mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 80mm consist the length of thread and the length of knurling.
  • legth: 80mm
  • thread: M12 x 1,5
  • thread length: 68mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7203

wheel bolt 60mm with flat portion

Wheel bolt fit to the Wartburg 353 and 1.3 front axle with disc brake system. Inclusice one side cuted.
Please note:
The length of 60mm consist the length of thread and the length of knurling.
  • legth: 60mm
  • thread: M12 x 1,5
  • thread length: 48mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,62 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7202

wheel bolt 50mm with flat portion

Wheel bolt fit to the Wartburg 353 and 1.3 front axle with disc brake system. Inclusice one side cuted.
Please note:
The length of 50mm consist the length of thread and the length of knurling.
  • legth: 50mm
  • thread: M12 x 1,5
  • thread length: 37mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,33 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7677

wheel bolt 40mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 40mm consist the length of thread and the length of knurling.
  • legth: 40mm
  • thread: M12 x 1,5
  • thread length: 28mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,98 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7200

wheel bolt 50mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 50mm consist the length of thread and the length of knurling.
  • legth: 50mm
  • thread: M12 x 1,5
  • thread length: 38mm
  • knurling diameter: 14,5mm
  • knurling length: 7,6mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
4,86 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6450
Delivery only at advance payment.

wishbone, rear axle, right hand W353/W1.3

for both typs Limousine and Tourist

second-hand wishbone for right side of rear axle
No new part!
485,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6466

wishbone, rear axle, left hand W353/W1.3

for both typs Limousine and Tourist

second-hand wishbone for left side of rear axle
No new part!
485,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6467

Bolt for wishbone, rear axle

Mounting bolt for the rear axle of the Wartburg 353 and Wartburg 1.3 at the car frame.
Delivery a an single part.
55,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7563

inner rubber bearing for anti-roll bar

rubber bearing fit for the clamp to mount the anti-roll bar of rear axle on underside of car
  • fit to Wartburg 353 and Wartburg 1.3
  • 2 pieces will be needed
  • inner diameter: ca. 13 mm
  • wide total: ca. 39 mm
  • outer diamter (in the area of clamp: ca. 32 mm
parts-no. from spare parts list: 53 02002 504
12,40 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6612

Outer rubber filler for anti-roll bar (1 pair)

One pair of rings, made of black rubber
Fit to mount the retainer of anti-roll bar on left arm of rear axle.
This part is an new German reproduction made with our own tools. The rubber part is at the sizes and rubbermaterial equivalent to the original part and and good replacement.
  • fit to Wartburg 353 and Wartburg 1.3
  • 2 sets will be needed for each raer axle
  • inner diameter: 10 mm
  • wide total: 15 mm
  • outer diamter: ca. 29 mm
  • made in Germany
parts-no. from spare parts list: 53 08006 904
4,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7015
Delivery only at advance payment.

outer rubber bearing for anti-roll bar

outer rubber bearing fit for the the anti-roll bar of rear axle
  • fit to Wartburg 353 and Wartburg 1.3
  • 2 pieces will be needed
  • inner diameter (smallest position): ca. 9 mm
  • wide total: ca. 29 mm
  • outer diamter (in the area of clamp: ca. 29 mm
parts-no. from spare parts list: 53 02002 914
5,56 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7014

clamp for anti-roll bar

Clamp to mount the anti-roll bar of rear axle on underside of car
  • fit to Wartburg 353 and Wartburg 1.3
  • 2 pieces will be needed
  • wide of steel strip: 30 mm
  • thickness of steel strip: 2,5 mm
  • inner diameter of clamp: ca. 33 mm
  • drill diameter: 10,5 mm
original-spare partparts-no. from spare parts list: 53 02002 617ZAK-no. from spare parts list: 134 29 11 006 077 301
9,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3225

Wheel bearing 6009 C2

Outher ball bearing for the front and rear axle of Wartburg 353 und Wartburg 1,3
  • one piece needed for each wheel (four at all)
  • wheel beraing type: 6009 C2
  • made in Germany
26,39 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3320

wheel bearing Wartburg, 6307 C2

Outher ball bearing for the Wartburg 353 und Wartburg 1,3.
Fit to the front and rear axle of all types.
  • one piece needed for each wheel(four at all)
  • wheel bearing type: 6307 C2
  • made in Germany
28,07 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3325

Shim washer (rubber)

Shim rubber made of rubber. Mounting between outer ring of inner wheel bearing and bearing case.
Fit to the front and rear axle of Wartburg 353 and 1.3
  • New production made of our own mouldings
  • material: rubber, black
  • total 4 pieces will be needed
Parts-No. 53 01201 503
8,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7008

Radial sealing 55 x 75 x 10 SL

Sealing with additional dust lip to protect the sealing lip to protect the wheel bearings at the front and rear axle.
This radial seal will be mounted at the outside of the wheel bearing housing (wheel side / wheel hub side)
  • material: NBR black
  • made in Germany
  • for the front axle 2 pieces and for the rear axle 2 pieces will be needed
  • Fit to the models: Wartburg 312, wartburg 353 und Wartburg 1,3
Made in Germany
reduced from 10,92 € to 8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3330

Bolt for wheel bearing housing rear axle W1,3

Screw for mounting the wheel bearing case at the rear axle left or right hand
W1,3.
Hexagon socket-head screw like original made with strength class 10.9
  • Hexagon bolt
  • strength grade 10.9
  • surface galvaniced
  • delivery as an single part
  • fit for the rear axle of Wartburg 1.3
  • please note: fit not for the rear axle of the Wartburg 1,3
  • 8 pieces will be needed
3,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8221

Wheel nut Wartburg

Castle nut for mounting the wheel hub - wheel bearing - connection.
The nut fit to the front axle drive shaft and to the rear axle kingpin.
  • fit to Wartburg 353 and Wartburg 1.3
  • delivery as an single part without pin
  • four pieces will be needed
3,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8025

Centering washer dirve shaft

Special washer for centering the wheel hub and the drive shaft (wheel side).
Mounting place between castle nut and the wheel hub.
The washer fit to the front axle drive shaft.
  • fit to Wartburg 353 and Wartburg 1.3
  • delivery as an single part
  • material: steel, galvaniced
  • two pieces will be needed
original spare part number: 134 29 11 006 075 701
3,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8174

Rubber spring for end stop wishbone (W353/W1.3)

Black rubber spring for upper end stop of wishbone rear axle (wartburg 353 and 1.3) and for upper wishbone of front axle Wartburg 353 (maybe for Wartburg 1.3, too)
  • four pieces will be needed for complete rear axle of Wartburg 353 and 1,3
  • two pieces will be needed for both upper wishbones of Wartburg 353 front axle
Parts-No. 53 01200 406
13,39 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7056

Rubber lid for trailing arm, rear axle (W353/W1.3)

Black rubber washer to seal the inner side of wheel carier

Fit to rear axle of Wartburg 353 and 1.3
Parts-No. 53 02001 214
6,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7020

Hub cap , plastic

Plastic cover for the inner hole of Wartburg wheel disk to cover the hub axle nut.
  • material: plastic, black
  • made in EU
  • for each wheel one piece will be needed
18,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7042

Wheel bearing set

Wheel bearing set for the front and rear axle of the Wartburg 353 and 1,3.
Set consist of:
  • 1x deep groove ball bearing:6009 C2
  • 1x deep groove ball bearing:6307 C2
  • 1x sealing ring
  • all components are made by german producers
  • for each car total 4 sets will be needed
58,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7242

wheel bolt 60mm

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 60mm consist the length of thread and the length of knurling.
  • legth: 60mm
  • thread: M12 x 1,5
  • thread length: 48mm
  • knurling diameter: 14,5mm
  • knurling length: 7,5mm
Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.
5,62 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7201

Silent buffer bush for wishbone

Silentbuffer bush fit to all chassis arms of Wartburg 353 and Wartburg 1,3 with the eye diameter 26mm.
  • upper wishbone, front axle - 2 pieces for each wishbone
  • lower wishbone, front axle - 2 pieces for each wishbone
  • wishbone, rear axle - 2 pieces for each wishbone

summary:
  • front axle: in all 8 pieces
  • rear axle: in all 4 pieces
11,05 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6372

Metal bushing for buffer bearing bush of wishbone

Metall bushing to use in tandem with rubber for buffer bearing bush
Fit to all chassis arms of Wartburg 353 (new type of bearing bush)
Also fit to older types of bearing bushes if carry on using outer metal bushing of that.

  • best quality, made in Germany
  • upper wishbone, front axle - 2 pieces for each wishbone
  • lower wishbone, front axle - 2 pieces for each wishbone
  • wishbone, rear axle - 2 pieces for each wishbone

summary:
  • front axle: in all 8 pieces
  • rear axle: in all 4 pieces
5,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6813

Rubber for buffer bearing bush of wishbone

Rubber bushing to use in tandem with metal bushing for buffer bearing bush
Fit to all chassis arms of Wartburg 353 (new type of bearing bush)
Also fit to older types of bearing bushes if carry on using outer metal bushing of that.

  • upper wishbone, front axle - 2 pieces for each wishbone
  • lower wishbone, front axle - 2 pieces for each wishbone
  • wishbone, rear axle - 2 pieces for each wishbone

summary:
  • front axle: in all 8 pieces
  • rear axle: in all 4 pieces
6,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6812

Pin for wheel nut Wartburg

Locking pin for the castle nut to lock the wheel hub - wheel bearing - connection.
The pin fit to the front axle drive shaft and to the rear axle kingpin.
  • fit to Wartburg 353 and Wartburg 1.3
  • delivery as an single
  • four pieces will be needed
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8026

Form ring 10mm for grinded Spring, rear axle

Rubber form ringfor the grinded coil spring for the Wartburg 353 and 312.
This form ring is about 10mm thickness.
Plaese check at your Wartburg before, which ring / Spring type is mounted!
Fit to typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 10mm
  • made in Germany
  • 2 pieces will be needed
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8654
The complete offer in rear axle

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas