This site in german: Wartburg 1.3 > Ersatzteile > Hinterachse 
You are here: > Wartburg 1.3> Spare parts> rear axle

rear axle

The product category Wartburg 1.3 > Spare parts > rear axle is spread over 4 sites:

Outer rubber filler for anti-roll bar (1 pair)

One pair of rings, made of black rubber
Fit to mount the retainer of anti-roll bar on left arm of rear axle.
This part is an new German reproduction made with our own tools. The rubber part is at the sizes and rubbermaterial equivalent to the original part and and good replacement.
  • fit to Wartburg 353 and Wartburg 1.3
  • 2 sets will be needed for each raer axle
  • inner diameter: 10 mm
  • wide total: 15 mm
  • outer diamter: ca. 29 mm
  • made in Germany
parts-no. from spare parts list: 53 08006 904
4,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7015

outer rubber bearing for anti-roll bar

outer rubber bearing fit for the the anti-roll bar of rear axle
  • fit to Wartburg 353 and Wartburg 1.3
  • 2 pieces will be needed
  • inner diameter (smallest position): ca. 9 mm
  • wide total: ca. 29 mm
  • outer diamter (in the area of clamp: ca. 29 mm
parts-no. from spare parts list: 53 02002 914
5,56 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7014

clamp for anti-roll bar

Clamp to mount the anti-roll bar of rear axle on underside of car
  • fit to Wartburg 353 and Wartburg 1.3
  • 2 pieces will be needed
  • wide of steel strip: 30 mm
  • thickness of steel strip: 2,5 mm
  • inner diameter of clamp: ca. 33 mm
  • drill diameter: 10,5 mm
original-spare partparts-no. from spare parts list: 53 02002 617ZAK-no. from spare parts list: 134 29 11 006 077 301
9,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3225

Wheel bearing 6009 C2

Outher ball bearing for the front and rear axle of Wartburg 353 und Wartburg 1,3
  • one piece needed for each wheel (four at all)
  • wheel beraing type: 6009 C2
  • made in Germany
26,39 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3320

wheel bearing Wartburg, 6307 C2

Outher ball bearing for the Wartburg 353 und Wartburg 1,3.
Fit to the front and rear axle of all types.
  • one piece needed for each wheel(four at all)
  • wheel bearing type: 6307 C2
  • made in Germany
28,07 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3325

Shim washer (rubber)

Shim rubber made of rubber. Mounting between outer ring of inner wheel bearing and bearing case.
Fit to the front and rear axle of Wartburg 353 and 1.3
  • New production made of our own mouldings
  • material: rubber, black
  • total 4 pieces will be needed
Parts-No. 53 01201 503
8,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7008

Radial sealing 55 x 75 x 10 SL

Sealing with additional dust lip to protect the sealing lip to protect the wheel bearings at the front and rear axle.
This radial seal will be mounted at the outside of the wheel bearing housing (wheel side / wheel hub side)
  • material: NBR black
  • made in Germany
  • for the front axle 2 pieces and for the rear axle 2 pieces will be needed
  • Fit to the models: Wartburg 312, wartburg 353 und Wartburg 1,3
Made in Germany
10,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3330

Bolt for wheel bearing housing rear axle W1,3

Screw for mounting the wheel bearing case at the rear axle left or right hand
W1,3.
Hexagon socket-head screw like original made with strength class 10.9
  • Hexagon bolt
  • strength grade 10.9
  • surface galvaniced
  • delivery as an single part
  • fit for the rear axle of Wartburg 1.3
  • please note: fit not for the rear axle of the Wartburg 1,3
  • 8 pieces will be needed
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8221

Wheel nut Wartburg

Castle nut for mounting the wheel hub - wheel bearing - connection.
The nut fit to the front axle drive shaft and to the rear axle kingpin.
  • fit to Wartburg 353 and Wartburg 1.3
  • delivery as an single part without pin
  • four pieces will be needed
3,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8025

Centering washer dirve shaft

Special washer for centering the wheel hub and the drive shaft (wheel side).
Mounting place between castle nut and the wheel hub.
The washer fit to the front axle drive shaft.
  • fit to Wartburg 353 and Wartburg 1.3
  • delivery as an single part
  • material: steel, galvaniced
  • two pieces will be needed
original spare part number: 134 29 11 006 075 701
3,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8174
The product category Wartburg 1.3 > Spare parts > rear axle is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas