rear axle

The product category Wartburg 1.3 > Spare parts > rear axle is spread over 5 sites:

Radial sealing 55 x 75 x 10 SL

Sealing with additional dust lip to protect the sealing lip to protect the wheel bearings at the front and rear axle.
This radial seal will be mounted at the outside of the wheel bearing housing (wheel side / wheel hub side)

material: NBR black
made in Germany
for the front axle 2 pieces and for the rear axle 2 pieces will be needed
Fit to the models: Wartburg 312, wartburg 353 und Wartburg 1,3

Made in Germany

from 10,92 € to 8,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3330

Bolt for wheel bearing housing rear axle W1,3

Detail

Screw for mounting the wheel bearing case at the rear axle left or right hand
W1,3.
Hexagon socket-head screw like original made with strength class 10.9

Hexagon bolt
strength grade 10.9
surface galvaniced
delivery as an single part
fit for the rear axle of Wartburg 1.3
please note: fit not for the rear axle of the Wartburg 1,3
8 pieces will be needed

3,21 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8221

Wheel nut Wartburg

Detail

Castle nut for mounting the wheel hub - wheel bearing - connection.
The nut fit to the front axle drive shaft and to the rear axle kingpin.

fit to Wartburg 353 and Wartburg 1.3
delivery as an single part without pin
four pieces will be needed

3,84 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8025

Centering washer dirve shaft

Detail

Special washer for centering the wheel hub and the drive shaft (wheel side).
Mounting place between castle nut and the wheel hub.
The washer fit to the front axle drive shaft.

fit to Wartburg 353 and Wartburg 1.3
delivery as an single part
material: steel, galvaniced
two pieces will be needed

original spare part number: 134 29 11 006 075 701

3,82 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8174

Rubber spring for end stop wishbone (W353/W1.3)

Detail

Black rubber spring for upper end stop of wishbone rear axle (wartburg 353 and 1.3) and for upper wishbone of front axle Wartburg 353 (maybe for Wartburg 1.3, too)

four pieces will be needed for complete rear axle of Wartburg 353 and 1,3
two pieces will be needed for both upper wishbones of Wartburg 353 front axle

Parts-No. 53 01200 406

13,39 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7056

Rubber lid for trailing arm, rear axle (W353/W1.3) Detail Black rubber washer to seal the inner side of wheel carier Fit to rear axle of Wartburg 353 and 1.3
Parts-No. 53 02001 214	6,43 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7020

Hub cap , plastic

Detail

Plastic cover for the inner hole of Wartburg wheel disk to cover the hub axle nut.

material: plastic, black
made in EU
for each wheel one piece will be needed

5,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7042

Wheel bearing set

Detail

Wheel bearing set for the front and rear axle of the Wartburg 353 and 1,3.
Set consist of:

1x deep groove ball bearing:6009 C2
1x deep groove ball bearing:6307 C2
1x sealing ring
all components are made by german producers
for each car total 4 sets will be needed

58,36 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7242

wheel bolt 60mm

Detail

universel wheel bolt fit to Wartburg, Trabant and DDR trailers and campers
Please note:
The length of 60mm consist the length of thread and the length of knurling.

legth: 60mm
thread: M12 x 1,5
thread length: 48mm
knurling diameter: 14,5mm
knurling length: 7,5mm

Bitte beachten: Der Artikel ist im Geltungsbereich der StVZO nicht zugelassen. Nach Einbau erlischt die Betriebserlaubnis des Kraftfahrzeuges.

5,62 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7201

The product category Wartburg 1.3 > Spare parts > rear axle is spread over 5 sites:

1 2 3 4 5
Show all products

* All prices inclusive VAT and plus shipping costs.