clutch and clutch kits

The complete offer in clutch and clutch kits

Clutch set W1.3

If the clutch slips during driving with 3. or 4. gear, the clutch components have to change.

This clutch set fits to all variants of Wartburg 1.3 (with 4-stroke engine).

content:

180mm clutch
180mm cluch disc with springs
release bearing

All parts are made or overhauled in Germany.
For more informations to this exchange part please use the Detail button.

Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.

490,00 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6561

Clutch W1.3 Detail Clutch (pressure plate with disk spring) only fit to Wartburg 1.3 (4-stroke engine) For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.	350,00 €inclusive VAT, plus shipping costs temporary not available Art.No. 3103

Cluch disc, full elastic T1.1 / W1.3

Detail

Complete in Germany overhauled full elastic clutch disc (with springs). High quality friction surface.

fit to follow vehicles (all 4-stroke):
- Trabant 1.1
- Wartburg 1.3
This spare part is complete overhauled in Germany.
Please send your clutch and clutch disc in advance to our company for reparing.

delivery as single part
diameter: 180mm
refreshed in Germany

Overhaul part, please send the clutch disc in advance to our company

127,66 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 672

Slip ring disengager (4-stroke)

Detail

slip ring disengager fit for follow vehicles:

Trabant 1.1: all models
Wartburg 1.3: all models
B1000 (2-stroke): from 03/1985 onwards
B1000-1 (4-stroke): all models

34,15 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 680

Spring for clutch release bearing from 6/85 Detail Snap clamp for mounting the pressure bearing at the release shaft. Fir to the following car types: Wartburg 353 ab 6-1985 Limousine and Tourist Trabant 1,1 without vintage limit Kombi and Limousine Wartburg 1,3 without vintage limit Tourist and Limousine Barkas B1000 ab 3-85 with clutch D=200mm Barkas B1000-1 without vintage limit
2,49 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7328

Cluch cable complete (W1.3)

Detail

bowden cable for slip ring disengager of clutch

length total: 66 cm
length of cable hull: 47,5 cm
made in Euope

Made in EU

32,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3111

sleeve for cluch cable

Detail

sleeve for clutch cable of Wartburg 353 (2-stroke) and Wartburg 1.3 (4-stroke)

length: 90mm
lenght (short): ca. 55mm
inner diameter big: 12mm
inner diameter small: ca. 6mm

9,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6370

Brake-cleaner, one packing unit, 12x Sprayer 600ml

Detail

Complete packing unit quick-cleaner for brake and clutch parts

FCKW free
content: 12x sprayer with volume of 600 ml

That implies a price of a single sprayer of 3,90 €price 6,50 Euro / liter

46,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7033

Delivery only at advance payment.

Brake pipe spanner 10-11mm angled Detail Special tool for mounting or demounting of screw-cap for brakelines. type: level angleded Fit to brake screws SW10 and SW11.
12,47 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7702

Brake pipe spanner 10-11mm, straight Detail Special tool for mounting or demounting of screw-cap for brakelines. type: sraight Fit to brake screws SW10 and SW11.
9,86 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7703

Brake pipe spanner 12-13mm, straight Detail Special tool for mounting or demounting of screw-cap for brakelines. type: sraight Fit to brake screws SW12 and SW13.
12,43 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7992

Brake-cleaner XXL 850ml

Detail

quick-cleaner for brake and clutch parts

FCKW, aceton free
volume: 850 ml
delivery as an single spray

price 5,29 Euro / liter

4,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7898

brake-cleaner 600ml

Detail

quick-cleaner for brake and clutch parts

FCKW free
volume: 600 ml
delivery as an single spray

price 7,62 Euro / liter

4,57 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6252

Disengaging shaft ( for clutch ) W1,3

Detail

Lever shaft for the clutch of the Wartburg 1.3 engine.
Mounting place: gearbox clutch void.
Spare part is complete with lever for the clutch cable and two arms for the clutch disenger.

steel contruction
one piece will be needed
made in Europe

99,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7429

Rivet set for clutch facing ( 12 pices )

Detail

Tubular rivet for cluch facing. Like the original ones made of steel.
Fit to the clutch linings of:

Trabant 601 D=160mm old- (fixede) and late- (tongued) clutch disc
Trabant1.1 clutch disc
Wartburg 353 D=180mm clutch disc
Barkas B1000 D=180mm and 200mm clutch disc
Wartburg 1.3 clutch disc
Barkas B1000-1 clutch disc

ideal for self repair
scope of delivery 12 pieces
material: steel
made in Germany

4,64 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 664

Spring for clutch pedal

Detail

Release spring for the pedal system at the Wartburg 353 and Wartburg 1,3.
Will be mounted on one hand at the clutch pedal and on the other side at the car body.
The spring supports the pedal reset of the clutch pedal.

material: steel
surface: galvaniced
one piece will be needed
delivery as an single part
best replacement and high quality, made in Germany

4,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8209

Retainer spring for clutch cable

Detail

Retainer wire to fic the clutch cable at the vehicle frame or holder.
Can be used for Fahrzeuge: Wartburg 311,312, 313, Wartburg 353 and 1.3 and Barkas B1000 und B1000-1.
High quality reproduction.

material: spring steel
one piece will be needed

3,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8313

Ring gear for starter

Detail

Starter gear to mount at the 4-stroke engine fly wheel.

Fit to the vehicles: Trabant 1.1, Wartburg 1.3 and
Barkas B1000-1
113 theeth
inside diameter: 212mm
wide: 8mm
made in EU

84,76 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 686

The complete offer in clutch and clutch kits

* All prices inclusive VAT and plus shipping costs.