This site in german: Wartburg 1.3 > Ersatzteile > Motor > Zylinderkopf 
You are here: > Wartburg 1.3> Spare parts> Engine> Cylinder head
Navigation

Engine spare parts and

The product category Wartburg 1.3 > Spare parts > Engine > Cylinder head is spread over 4 sites:

1234
Show all products

Camshaft timing gear

Timing gear for toothed belt camshaft. Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • made in Germany
  • number of theeth: 44
  • one piece will be needed
52,22 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7261

Exhaust manifold seal

Simple construction of the manifold seal. Material graphite texture paper.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 und B1000-1 - bouth of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
reduced from 5,64 € to 4,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 31

Exhaust manifold seal with meatl ring

Better construction of the manifold seal. Material graphite texture paper with metal pressing ring for each cylinder.
Splitted seal (that is one exhaust manifold seal for two cylinder)
  • made in Germany by Elring
  • sealing between outlet side of the cylinder head and the exhaust manifold
  • fit to Trabant 1.1, Wartburg 1.3 and Barkas B1000-1- all of this motors have got an cross streem cylinder head
  • scope of delivery one paar (2 pieces)
Special offer normaly 18,77 € now 16,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6260

Pin bolt for exhaust maifold

5,71 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7668

exhaust nut, copper plated

Secure nut for the Trabant manifold. Surface is plated with coper.
  • thread: M8
  • spanner: SW12
0,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7304
Delivery only at advance payment.

exhaust nut with collar, copper plated

Secure nut for the Trabant manifold. Surface is plated with coper.
Use for mounting without washer.
  • thread: M8
  • spanner: SW132
  • grate: 8.8
  • collar diameter: 17,3mm
  • highness: 9,2mm
0,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7305
Delivery only at advance payment.

Sealing for suction pipe, Reinz

Spezail seal made of steel. Mounting between suction pipe and engine block.
This sealing is made of one piece for all four cylinders.
Fir for the Trabant 1,1 engine with 1100cccm and for Wartburg / Barkas B1000-1 engines with 1300ccm.
  • Manufacturer: Reinz
  • fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1
  • one piece will be needed
3,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8328

Bolt for connection rod crankshaft

High grade special bolt for the mounting of connection rod at the crankshaft.
Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • 2 piece will be needed for each connection rod
  • 8 pieces will be needed total
  • made in Germany
9,89 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 8736
Delivery only at advance payment.

Nut for connection rod crankshaft

High grade nut for the special bolt for the mounting of connection rod at the crankshaft.
Fit to Trabant 1.1 and Wartburg 1.3 and Barkas B1000-1.
  • 2 piece will be needed for each connection rod
  • 8 pieces will be needed total
  • made in Germany
2,92 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 8737
Delivery only at advance payment.

Cylinder head resurfacing + valve grinding

Valve stem sealing can be used for Trabant 1.1 and Wartburg 1.3 with 4 stroke four cylinder motor.

If oil consumtion of engine is to much the wastage of valve stem sealings can be the reason.
8 pieces will be needed for one complete cylinder head (10 valves)
285,00 €inclusive VAT, plus shipping costs
Delivery in 5 days.

Art.No. 8738
Delivery only at advance payment.
The product category Wartburg 1.3 > Spare parts > Engine > Cylinder head is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas