suspension

The complete offer in suspension

Original leaf spring, overhauled, station wagon Detail Complete overhauled leaf spring for the rear axle of Trabant 601 station wagon. Please note: Exchange spare part. Please use the detail button to get more informations about the additional deposit.
+ 100 Euro additional deposit	128,00 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6122

Original leaf spring, overhauled, Limousine Detail Complete overhauled leaf spring for the rear axle of Trabant 601 type Limousine. Please note: Exchange spare part. Please use the detail button to get more informations about the additional deposit.
+100,00 Euro additional deposit	128,00 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 1322

Telescopic shock absorber for laef spring

Detail

Telescopic shock absorber for leaf spring. Fit to front and rear axle of Trabant 601.
This Trabi shocks are an new production in Germany. Best replacement for the original ones.
Shock absorber fit to the front axle with leaf spring: vinatge 1964-1990 and
raer axle with leaf spring:vintage 1964-1988.
Can be used for all types of Trabant like Limousine, Universal (station wagon), Kübel and Tramp.
scope of delivery:

complete inclusive bushing and plastic housing for piston rod
Piston rod inclusive 2x rubber bearing and 1x washer
surface: powder coated, black
Made in Germany

64,24 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 935

Telescopic shock absorber for laef spring, SACHS

Detail

Telescopic shock absorber with tow cricle oil pessure system made by Sachs.
Fit to front and rear axle leaf spring of Trabant 601 (rear axle up to vintage: 1987).
scope of delivery:

complete preemounted bottom bushing
top end inclusive rubbers and washer
made by Sachs
two or four pieces will be needed total

69,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7060

Shock absorber for coil spring, rear axle

Detail

Telescopic shock absorber for coil spring. Fit to the rear axle of Trabant from vintage: 1988.
This Trabi shocks are an new production in Germany. Best replacement for the original ones.
Fit to all Trabant 601 from vintage 1988 und Trabant 1.1 Limousine, Kombi, Tramp and Kübel.
scope of delivery:

complete pre-installed inclusive bushing at the bottom mounting eye
with retainer for the lower spring penholder bottom
surface: powder coated, black
delivery as an single part, without mounting bits
Made in Germany

70,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1010

Rubber sleeve cushion for shock absorber coil spring

Detail

Rubber-matal-sleeve for mounting at the telescopic shock absorber for coil spring.
Fit to the rear axle of Trabant from vintage: 1988 and Trabant 1,1 all types.

for shock eyes with diameter: 34mm, lenght: 45mm
length of the metal sleeve: 50mm
made in Germany

12,05 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8034

Rubber sleeve cushion for shock absorber 30mm

Detail

The bushing is pressed in to the eye of the shock absorber diameter size 30mm.
Fit to Trabant 500,600,601 leaf spring shocks or Wartburg 311/312/353, DDR trailers shocks and so on...

1x length inner sleeve: 32 mm
1x rubber
made in Germany
2 or 4 pieces will be needed

12,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8028

Pressure piece, shock absorber, coil spring, rear side

Detail

the pessure piece fit to Trabant 601 with coil spring rear side
from year april 1988

material: plastic
two pieces will be needed

6,55 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1011

Pressure pice, shock absorber, coil spring, rear side

Detail

the pessure pice fit to Trabant 601 with coil spring rear side
from year april 1988

material: aluminium
two pieces will be needed

9,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6360

Cap, shock absorber, coil spring, rear side

Detail

Upper rubber bearing for the suspension strut of rear axle (only for coil spring!)

Trabant 601 form vintage April 1988
Trabant 1,1 all models
two pieces will be needed

7,36 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1012

Coil spring, rear side Limousine

Detail

Trabant helical spring for the rear axle from vintage august 1988 ownwards with Mc-Pherson system.
New German production with the exect size and spring constant like as original.

wire diameter: 11 mm
coil number: 8,5
demounted length: 317 mm
middle coil diameter: 98 mm
made in Germany

73,23 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6630

Coil spring, rear side Universal

Detail

Trabant station wagon helical spring for the rear axle from vintage 8-88 ownwards with Mc-Pherson System.
New German production with the exect size and spring constant like as original.

wire diameter: 12 mm
coil number: 8,5
demounted length: 286 mm
middle coil diameter: 98 mm
made in Germany

77,97 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6631

Protection pipe for shock absorber, rear axle (Limousine)

Detail

Upper coil spring retainer for the rear suspension. The metal holder will be mounted on top of the rear shock absorber.
Type: can be used for Trabant 601 and 1.1 Limousine.
Used (nor new) original spare part.

for each car two pieces will be needed

31,95 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1013

Protection pipe for shock absorber, rear axle (estate car)

Detail

Upper coil spring retainer for the rear suspension. The metal holder will be mounted on top of the rear shock absorber.
Type: can be used for Trabant 601 and 1.1 Universal (estate car).
Used (nor new) original spare part.

for each car two pieces will be needed

31,95 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6226

Penholder bottom, rear axle Detail
22,87 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 1014

Stop bumper (rubber)

Detail

Stop position absorber for the leaf spring rear axle at the undertray.
The rubber part will be used in tandem with plastic part of stop spring.

original spare part
for all Trabant 500,600 and 601 up to vintage 1988 with leaf spring rear
two pieces will be needed

3,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 918

End stop for leaf spring ( miramid )

Detail

This plastic part is one of two parts for the end stop bumper for leaf spring.
It will be mounted inside at the undertray and fixes by an bracket.
The Miramid will be used in tandem with rubber for end stop (Art.Nr.: 918

original spare part
for all Trabant 500,600 and 601 up to vintage 1988 with leaf spring rear
two pieces will be needed

10,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 919

Spring rubber pad, complete for rear axle (leaf spring) Detail Fit to rear axle of Trabant 500, 600 and 601 with vintage up to 1987 with leaf spring Also fit to Qek camper und folded tent trailer Klappfix / camptourist
12,42 €inclusive VAT, plus shipping costs temporary not available Art.No. 997

Holder for shocks leaf spring, right hand

Detail

Bottom shock absorber socket for leaf spring suspension rear axle.
The U-profile is mounted with two bolts on top of the rear axle assembly, right hand (codriver side).
This part is original manufactured
fit to:

Trabant 500,600 and 601 up to yaer april 1988
one piece will be needed

9,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6364

Holder for shocks leaf spring, left hand

Detail

Bottom shock absorber socket for leaf spring suspension rear axle.
The U-profile is mounted with two bolts on top of the rear axle assembly, left hand (driver side).
This part is original manufactured
fit to:

Trabant 500,600 and 601 up to yaer april 1988
one piece will be needed

9,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6363

Mounting bolt for leaf spring shocks

Detail

Hexagon srew for mounting the shock absorbers at the front leaf spring and at the bottom of the rear axle left and right hand.
fit to:

Trabant 500,600 and 601 up to yaer april 1988
two pieces will be needed for the front axle
up to yaer april 1988 two pieces will be needed for the rear axle
scope of delivery complete with spring washer and hexagon nut
grade: 10.9

5,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7823

Holder for shocks coil spring, right hand

Detail

Bottom shock absorber socket for coil spring suspension rear axle.
The U-profile is mounted with two bolts on top of the rear axle assembly, right hand (codriver side).
This part is original manufactured
fit to:

Trabant 601 from yaer april 1988
Trabant 1,1 all models
one piece will be needed

19,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6361

Holder for shocks coil spring, left hand

Detail

Bottom shock absorber socket for coil spring suspension rear axle.
The U-profile is mounted with two bolts on top of the rear axle assembly, left hand (driver side).
This part is original manufactured
fit to:

Trabant 601 from yaer april 1988
Trabant 1,1 all models
one piece will be needed

19,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6362

Mounting bolt for coil spring shocks

Detail

Hexagon srew for mounting the shock absorbers on bottom of the rear axle left and right hand.
fit to:

Trabant 601 from vintage april 1988, Trabant 1,1
two pieces will be needed
scope of delivery complete with spring washer
grade: 10.9

3,94 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8186

The complete offer in suspension

* All prices inclusive VAT and plus shipping costs.