track rods, track rod end and mounting parts

The complete offer in track rods, track rod end and mounting parts

Track rod, complete with EU ball joint

Track rod with ball joint at the outher side and elastomer joint at the inner side.
Delivery pre-installed inclusive connection element, nut right- / left tap and locking plates.

fit to Trabant 500,600 und 601
ball joint made in Eu
two pieces will be needed

68,13 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 960

Track rod, complete with DE ball joint

Detail

Track rod with ball joint at the outher side and elastomer joint at the inner side.
Delivery pre-installed inclusive connection element, nut right- / left tap and locking plates.

fit to Trabant 500,600 und 601
ball joint made Germany
two pieces will be needed

98,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8482

Track rod with elastomer joint

Detail

Track rod fit to all Trabant 500,600 und 601 types without vintage limit.
One side with tap connection, left tap M14x1,5.
The elastomer joint is complete and will be mounted at the steering column side.
tap at the cone: M10x1,0
Please note: the delivery is without any mounting parts linke nuts, pins ...

genuine spare part
two pieces will be needed

39,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 961

Ball joint for trak rod, made in Germany

Detail

Track-rod end fit to the right and left hand of the Trabant 601 and Trabant 1.1 track rods (outside)
The spare part is made in Germany and will be the best exchange to to original ball joints.

Two pieces will be needed for each car
Tap at the shank M14x 1,5 right
Tap at the cone: M10x1,0
delivery inclusive looknut M10 x 1,0 and pin
made in Germany

35,43 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7568

Ball joint for trak rod, complete Detail Track-rod end for the Trabant. The spare part is made in EU Two pieces will be needed for each car. Tap at the shank M14x 1,5 right Tap at the cone: M10x1,25 delivery inclusive looknut M10 x 1,25
18,80 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 962

Sleeve for ball joint

Detail

replacement sleeve for ball joint. Fit to Trabant601, Trabant 1,1 and Wartburg 353 and 1,3.

It is only recommendable if ball joint is without any slackness

2,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 938

Castle nut track rod M10x1

Detail

0,94 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7101

Pin for castle nut

Detail

Secure pin for the castle nut original track-rod ends.
Size: 2x28 mm
material: stainless steel
two or four pieces will be needed
made in Germany

0,15 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7102

Locknut for track rod M10x1

Detail

Security nut for the original track-rod ends.
tap: M10 x 1,0
strength class: 10.9
two or four pieces will be needed
made in Germany

0,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 969

Locknut track rod end M10x1,25

Detail

Security nut only use for the new produced (made in EU) track-rod ends.
tap: M10 x 1,25
strength class: 10.9
two pieces will be needed
made in Germany

0,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6902

Steering knuckle leaver, left hand

Detail

Steering leaver for the Trabant 500,600 and 601 steering knuckle.
Mountable at steering knuckles with hinge drive or with constant velocity drive shafts without vintage limit.
Mounting place: driver side (left)
genuine spare part
one piece will be needed

19,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 964

Steering knuckle leaver, right hand

Detail

Steering leaver for the Trabant 500,600 and 601 steering knuckle.
Mountable at steering knuckles with hinge drive or with constant velocity drive shafts without vintage limit.
Mounting place: co-driver side (right)
genuine spare part
one piece will be needed

19,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 965

Nut for Steering knuckle leaver Detail Nut for Steering knuckle leaver, fit to right and left hand 2 pieces will be needed
0,90 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6358

Look plate for track rod

Detail

Sheet metal with two brackets for mounting at the Trabant track rods.
After you adjust the track at your car you have to secure this look plates.
Please note: This part can be only udes one time

material: steel
Survace: galvanicedt
made in Germany
4 piece will be needed

1,23 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 963

Nut for track rod M14, right tap

Detail

Trak rod nut for mounting at the connection between clutch element for track rod and ball joint.
Fit to all Trabant types: 500,600,601 und 1.1

strength class: 10.9
surface: galvanized
thread M14x1,5 right
for each car two pieces will be needed
made in Germany

1,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 966

Nut for track rod M14 x 1,5 left

Detail

Trak rod nut for mounting at the connection between track rod - clutch element for track rod.
Fit to all Trabant types: 500,600,601 und 1.1

strength class: 10.9
surface: blank
thread M14x1,5 left turn
for each car two pieces will be needed
made in Germany

6,13 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 967

Adjustment element for track rod

Detail

Hexagon adjustment piece with for the connection between spur rod head and track rod.
This element have one side with right threat (track rod head) on the other side left threat (track rod)
The connection piece is used to setting the track of the front wheels at the
Trabant 500, 600, 601 and 1,1.

Delivery as single part, without any mounting bits
Spanner gap: SW22
made in Germany
2 pieces will be needed

15,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 968

puller for ball joint 18/38mm Detail gable width: 18 mm max. lenght of ball joint axle: 38 mm best use for track rod joints of Trabant and Wartburg.
69,91 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6192

Brake hose retainer for Steering knuckle leaver left hand

Detail

metal holder for the fron brake hose at the Trabant 500, 600 and 601 front axle right hand (driver side).
Mouning at the rear side of the steering knuckle leaver bolt.
The retainer will also used at the lock plate for this screw connection.

original spare part
material: steel
delivery without any mounting bits
one piece will be needed

9,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7994

Brake hose retainer for Steering knuckle leaver right hand

Detail

metal holder for the fron brake hose at the Trabant 500, 600 and 601 front axle right hand (codriver side).
Mouning at the rear side of the steering knuckle leaver bolt.
The retainer will also used at the lock plate for this screw connection.

original spare part
material: steel
delivery without any mounting bits
one piece will be needed

9,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7993

The complete offer in track rods, track rod end and mounting parts

* All prices inclusive VAT and plus shipping costs.