This site in german: Trabant 601 > Ersatzteile > Motor > Kupplung 
You are here: > Trabant 601> Spare parts> Engine> clutch
Navigation

spare parts for the Trabant cluch

The complete offer in spare parts for the Trabant cluch

Clutch kit SACHS

clutch kit made by SACHS
consist of:
  • clutch
  • clutch disc without springs
  • ball bearing mounted disengager with mounting springs
  • fit to all Trabant 500, 600 und 601
  • one set will be needed

All parts are made in Germany
132,51 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6433

Clutch set up to May 1985

clutch set for Trabant 500, 600 and 601 up to vintage may 1985 with two stroke engine consist of:
  • clutch
  • clutch disc without springs d=160 mm
  • fit to all Trabant 500, 600 und 601
  • one set will be needed
  • All parts are refreshed or manufactured in Germany

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send one clutch and clutch disc (original IFA) to our company in advance !
159,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7309

Clutch set from May 1985

clutch set for Trabant 601 from vintage may 1985 with two stroke engine consist of:
  • clutch
  • clutch disc with springs d=160 mm
  • fit to all Trabant 500, 600 und 601
  • one set will be needed
  • All parts are refreshed or manufactured in Germany

For more informations to this exchange part please use the Detail button.
Delivery only in exchange! Please send one clutch and clutch disc (original IFA) to our company in advance !
268,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6434

Clutch up to May 1985

Trabant pressure plate for the cluch disk D=160 mm
This type are offen used at Trabant 500, 600 and 601.
Vintage up to may 1985.
  • exchange part
  • refreshed in Germany

For more informations to this exchange part please use the Detail button.
overhauled in GermanyDelivery only in exchange! Please send in advance one clutch up to May 1985 (original IFA) to our company.
86,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7310

Clutch from May 1985

Trabant cluch with additional band springs. Fit for the full elastic cluch disk D=160 mm.
This spare part is complete overhauled in Germany.
  • exchange part
  • refreshed in Germany

For more informations to this exchange part please use the Detail button.
overhauled in GermanyDelivery only in exchange! Please send in advance one clutch from May 1985 (original IFA) to our company.
200,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 670

Cluch disc EU, full elastic

standard clutch disc reproduction EU for our clutch
fit to all Trabant 500,600,601.
with additionally springs.
  • outside diameter: 160 mm
  • inside diameter cluch lining: 110 mm
  • cluch lining double sided, gauge: 6,7 mm
  • inside gearing: 12 notches
  • countof the damping springs: 6 pieces
Made in EU
54,17 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 675

Cluch disc, Germany (full elastic)

Complete refreshed in Germany with high quality materials.
Standard clutch disc reproduction EU for our clutch
fit to all Trabant 500,600,601.
with additionally springs.
  • outside diameter: 160 mm
  • inside diameter cluch lining: 110 mm
  • cluch lining double sided, gauge: 6,7 mm
  • inside gearing: 12 notches
  • countof the damping springs: 6 pieces

For more informations to this exchange part please use the Detail button.
overhauled in GermanyDelivery only in exchange! Please send in advance one clutch disc from May 1985 (original IFA) to our company.
107,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7906

Cluch disc, old type

New producted (Europe) spare part of the clutch disc without springs
fit to all Trabant 500,600,601.
  • outside diameter: 160 mm
  • inside diameter cluch lining: 110 mm
  • cluch lining double sided, gauge: 6,5 mm
  • inside gearing: 12 notches
32,73 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7395

Cluch disc old type, Germany

Clutch disc without springs, complete in Germany overhauled spare part.
fit to all Trabant 500,600,601.
  • outside diameter: 160 mm
  • inside diameter cluch lining: 110 mm
  • cluch lining double sided, gauge: 6,5 mm
  • inside gearing: 12 notches

For more informations to this exchange part please use the Detail button.
overhauled in GermanyDelivery only in exchange! Please send in advance one clutch disc up to May 1985 (original IFA) to our company.
107,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 676

Clutch facing - set for clutch disc EU

The set consist of:
  • 2x tclutch facing
  • 12x copper rivet 5 mm

fit to the Cluch disc axial elastic
  • one set will be needed
  • made in EU
fir only to repro clutch disc EU
18,29 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 677

Clutch facing - set for original clutch disc

Friction surface ideal for slef mounting at the Trabant clutch disc.
Kit contains two high quality clutch facings made in Germany and 12x steel rivet.
The set consist of:
  • 2x high-quality clutch facing
  • 12x tubular rivet 5 x 0,5mm

fit to the Clutch disc axial elastic, original IFA production and Clutch disc full elastic, original IFA production
  • one set will be needed
  • ideal for selfrepair
fit only for original IFA clutch disc
35,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7907

Rivet set for clutch facing ( 12 pices )

Tubular rivet for cluch facing. Like the original ones made of steel.
Fit to the clutch linings of:
  • Trabant 601 D=160mm old- (fixede) and late- (tongued) clutch disc
  • Trabant1.1 clutch disc
  • Wartburg 353 D=180mm clutch disc
  • Barkas B1000 D=180mm and 200mm clutch disc
  • Wartburg 1.3 clutch disc
  • Barkas B1000-1 clutch disc

  • ideal for self repair
  • scope of delivery 12 pieces
  • material: steel
  • made in Germany
4,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 664

Slip ring disengager

Slip ring disengager is comlete with graphite ring
  • one piece will be needed
  • reproduction spare part, Made in EU
42,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 678
Delivery only at advance payment.

graphite ring for slip ring disengager

slip ring for the Trabant cluch release bearing.
  • material: graphite
  • dimensions: D= 52 mm, d= 34,6 mm, thickness: 18 mm, thikness at the flattenings left and right side: 16,5 mm
  • original spare part
  • one piece will be needed
20,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6138
Delivery only at advance payment.

Grooved pin for clutch release yoke

Cylindrical pin for the connection and safety mechanism from the cluch lever to the yoke for the Trabant clucht release bearing.
  • DIN 14731
  • size: 5 x 26 mm
  • made in Germany
  • one piece will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6659
Delivery only at advance payment.

Clutch release yoke

Yoke for the Trabant clucht release bearing.
  • original spare part
  • one piece will be needed
29,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6182

Cluch cable complete

Cluch cable fit to the Cluch disc axial elastic und die Cluch disc full elastic
  • total lenght: 65,5cm
  • original spare part
  • one piece will be needed
56,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 679
Delivery only at advance payment.

Spring for Slip ring disengager

The spring strech hold the Slip ring disengager with the clutch release yoke
  • original spare part
  • two pieces will be needed
3,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6329

Brake pipe spanner 10-11mm angled

Special tool for mounting or demounting of screw-cap for brakelines.
type: level angleded
Fit to brake screws SW10 and SW11.
12,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7702
Delivery only at advance payment.

Brake pipe spanner 10-11mm, straight

Special tool for mounting or demounting of screw-cap for brakelines.
type: sraight
Fit to brake screws SW10 and SW11.
9,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7703

Brake pipe spanner 12-13mm, straight

Special tool for mounting or demounting of screw-cap for brakelines.
type: sraight
Fit to brake screws SW12 and SW13.
12,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7992

Brake-cleaner XXL 850ml

quick-cleaner for brake and clutch parts
  • FCKW, aceton free
  • volume: 850 ml
  • delivery as an single spray
price 5,29 Euro / liter
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7898

brake-cleaner 600ml

quick-cleaner for brake and clutch parts
  • FCKW free
  • volume: 600 ml
  • delivery as an single spray
price 7,62 Euro / liter
4,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6252
Delivery only at advance payment.

Brake-cleaner, one packing unit, 12x Sprayer 600ml

Complete packing unit quick-cleaner for brake and clutch parts
  • FCKW free
  • content: 12x sprayer with volume of 600 ml
That implies a price of a single sprayer of 3,90 €price 6,50 Euro / liter
46,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7033
Delivery only at advance payment.

Rubber lining EU for brake and clutch pedal-shaft

Rubber pad for the clutch and brake pedal.
  • material: rubber, black
  • made in EU
  • worse qulity
  • two pieces will be needed
8,55 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8013

Rubber lining made in Germany for brake and clutch pedal-shaft

Rubber pad for the clutch and brake pedal.
New reproduction made in Germany in brilliant quality.
Fit to many IFA cars like Trabant, P70/F8, Wartburg 311, Multicar...
  • material: rubber, black
  • made in Germany
  • best quality
  • two pieces will be needed
12,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 184

Foot lever clutch

Foot lever for the mecanical actuated cluch system of the Trabant 601 and 1,1.
24,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7127

Foot lever unit ( overhauled )

Foot lever unit constist of one lever for the hydraulic actuated brake system and one lever for the mechanical actuated cluch system. The set is complete in Germany refreshed and pre-installed.
110,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 185

release spring for pedal, late model

release spring fit to brake pedal and clutch pedal of pedal unit
length of the spring coil: 53mm
diameter of the spring coil: 10mm
total length of the spring: ca.122mm
New production in Germany
  • fit to Trabant 601 and Trabant 1.1
  • made of stainless steel (VA)
  • two pieces will be needed
6,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6643

release spring for pedal, old model

release spring fit to brake pedal and clutch pedal of pedal unit
length of the spring coil: 69mm
diameter of the spring coil: 8mm
total length of the spring: ca.160mm
New production made in Germany
  • fit to Trabant 601
  • made of stainless steel
  • two pieces will be needed
6,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7372

Mounting bolt for foot lever unit

Mounting screw for foot lever unit.
  • fit to Trabant 601 and Trabant 1,1
  • scope of delivery inclusive 1x bolt, 1x Washer, 1x spring washer
  • 4 pieces will be needed
1,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8522
The complete offer in spare parts for the Trabant cluch
Wir versenden mit DHL.
Banküberweisung
PayPal
SEPA-Lastschrift
© 2003 - 2026 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas