starter and spare parts

The complete offer in starter and spare parts

Starter 12V, complete overhauled

The starter is an complete in Germany overhauled spare part.
Fit to Trabant 500,600 and 601 with 12V system.
Delivery inclusive solenoid switch.
Please send your Trabant starter 12V in advance to our company for reparing.

delivery as single part
refreshed in Germany
car voltage: 6V

Overhaul part, please send the starter motor in advance to our company

287,03 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 779

Starter 6V

Detail

The starter is an complete in Germany overhauled spare part.
Fit to Trabant 500,600 and 601 with 6V system.
Delivery inclusive solenoid switch.
Type of starter: 0,4kw (0,6hp), left turning

Please send your Trabant starter 12V in advance to our company for reparing.

delivery as single part
refreshed in Germany
car volage: 6V

Overhaul part, please send the starter motor in advance to our companyoriginal spare part number: AKA 820.6/30

287,03 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 781

Starter 6V, old version

Detail

delivery as single part
refreshed in Germany
car volage: 6V

Overhaul part, please send the starter motor in advance to our company

311,21 €inclusive VAT, plus shipping costs

Delivery in 14 days.

Art.No. 8458

Freewheel for starter Trabant Detail Starter freewheel complete premounted inclusive pinion (9 teeth). Fit to Trabant (2-stroke). Can be used for starters 6V and 12V This part is made in Europe. High quality, best replacement for the genuine spare part.
Original spare part number: 8201.6-/1-230	26,77 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7848

Bushing for starter motor

Detail

Busing made of braas for the starter of the Trabant 601, Wartburg 353 and Barkas B1000.
This bearing guides the armature in front and rear side.
Can be used for 6V and 12V starters.

delivery as an single part
original spear part
two pieces will be needed

5,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8440

Protection cap for starter lite ( plastic )

Detail

Sealing cap to protect the starter wire (plus) against dust and moisture.
Fit to the vehicles: P70, Trabant, Wartburg, Multicar, Framo and Barkas.

made in Germany
one piece will be needed

6,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 786

Brush for starter

Detail

Spare-brushes of the starter engine to solder on at the coil set.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Baraks B1000-1)
mounting place: brushholder bas plate

size: 16X19x7
delivery as an single part
for each starter two pieces will needed

original spare part number: 8202.11-220:10

8,24 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 785

Spring for brush starter

Detail

Pressure spring for the brushes of the starter engine.
This spring will push the brush at the collector ring from the rotor shaft.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Barkas B1000-1)
mounting place: brushholder bas plate

original spare part
delivery as an single part
for each starter two pieces will needed

original spare part number: 8202.11-220.6

1,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7629

Coil set complete for starter 6V Detail Coil kit complete with brushes for the starter motor with 6V electrical system. This is an new original spare part. One set will be needed.
Original spare part number: 8201.6/1-100	21,89 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7630

Field coil 1 for starter 6V Detail Filed coil I for the starter motor with 6V electrical system. This coil have to be connectet with one end at the coil set and with the other end at the starter case. One piece will be needed This is an new original spare part.
Original spare part number: 8201.6/1-101	9,50 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7631

Field coil 2 for starter 6V Detail Filed coil II for the starter motor with 6V electrical system. This coil have to be connectet with one end at the coil set and with the other end at the starter case. One piece will be needed This is an new original spare part.
Original spare part number: 8201.6/1-102	9,50 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7632

Bolt for starter

Detail

Bolt of the Bearing case of the starter engine.
Connection bolt will be mounted at the beraing case threadholes and on the other side it will hold the rear case cover.
Delivery as a single part without nuts an washers.
Can be used for all kind of starters 6V and 12V left- and right turning (without Trabant 1.1, Wartburg 1.3 and Barkas B1000-1)

original spare part
surface: galvaniced
total length: 16.5 cm
delivery as an single part
for each starter two pieces will needed

original spare part number: 8202.1-000:4/1

2,93 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7658

Pole case complete for starter 6V Trabant

Detail

Outer case complete with field coils, filed coil set, two brushes, feeld coil retainer, connection wire for magnet switch.
Can be used for starter motor Trabant with 6V electrical system.
Pars is complete premounted and can be installed as it is.
This is an new original spare part.
Delivery without bearing bushings and mountng parts.

Original spare part number: 8201.6/3-100

65,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7642

Amature complete for starter 6V Trabant

Detail

Rotor shaft complete with collector ring for the starter motor Trabant with 6V electrical system.
This is an new original spare part.
Delivery without bearing bushings and mountng parts.

Original spare part number: 8201.6/1-210

62,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7628

Magnet, complete for starter 6V Detail Magnet switch for all starter types: Trabant 500,600,601, Wartburg 311,312,313 and Barkas B1000 with 6V system. This is an NOS spare part.
Original spare part number: 8201.6/3-400/1	65,23 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 780

Magnet, complete for starter 12V

Detail

Solenoid switch for starter for Trabant 601, Wartburg 353 and Barkas B1000.

operating voltage: 12V
spare part made EU
one piece will be needed

58,79 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 784

Ring gear for starter ( 6 mm )

Detail

ring gear for engine starter Trabant 601 from march 1972. It will be fixed at the fleywheel by shrinking.

width: 6mm
outside diameter: ca.250 mm
inside diameter: ca.228 mm
tooth ratio: 100
one piece will be needed

36,59 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 685

Ring gear for starter ( 8 mm )

Detail

ring gear for engine starter Trabant 601 up to march 1972. It will be fixed at the fleywheel by shrinking.

width: 8mm
outside diameter: ca.250 mm
inside diameter: ca.228 mm
tooth ratio: 100
one piece will be needed

68,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7795

Hexagon socket bolt M12

Detail

Bolt M12 with hexagon socket (inbus) to fix the starter threw the gearbox at the engine.
Fit to 6V and 12V starters

delivery complete with washer
size of allen key: SW 10
grade: 8.8
galvanized
price per piece
two pieces will be needed

2,39 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6384

Connection wire starter-dynamo

Detail

Cable harness complete ready made for mounting.
Connection between starter motor and AC dynamo at the Trabant 601.
Red cable for batterie charge power and blue wire for charge control light.
The blue cable will be connected by plug to the main cable harness near the signal horn.
Fit to AC generator 12V Trabant

Two core dynamo harness, engine compartment
high quality reproduction
one piece will be needed
made in Germany

19,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7961

The complete offer in starter and spare parts

* All prices inclusive VAT and plus shipping costs.