electrical installations and spare parts

Category electrical installations and spare parts has the following subcategorys:

The complete offer in electrical installations and spare parts

ground cable for car battery

connection cable between negative pole of car battery and the mounting screw of gearbox and engine (earth-connection, ground).

pre-finished
one cable tail with battery pole terminal
one cable tail with 8mm cable shoe
thick and robust isolation (outer diameter: 13,3mm
new made in Germany

41,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6563

cable for positive pole of car battery

Detail

connection cable between positive pole of car battery and the terminal screw of starter.

pre-finished
one cable tail with battery pole terminal
one cable tail with 8mm cable shoe for terminal screw of solenoid switch (mounted on starter)
thick and robust isolation (outer diameter: 13,3mm
new made in Germany

50,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6564

Cover for positive pole of car battery

Detail

Plastic cover to protect the positive pole of car battery.
Original spare part. Please note: fit only for original connetion wires between positive pole and the terminal screw of starter.

original sape part
delivery as single part
one piece will be needed
material: plasic, black

5,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8078

Seal ring for head lamp Trabant 601 original

Detail

This sealing ring is mounted behind the headlamp case. Last type with mechanical beam control.

coulor: black
material: rubber
original made in Germany
two pieces will be needed

14,73 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 57

Sealing plate, original for flasher stop tail lamp

Detail

Original rubber for sealing the rearlights to the car body. Fit to Trabant 601 and 1,1 (only cero models) universal and limousine.
Original spare part in brilliant quality and size.

material: rubber
coulor: black
original spare part made in Germany
two pieces will be needed

18,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8106

Fuse box SDB/8

Detail

Retainer for the fuses (8 pieces) as terminal block with clamp connection for the wires.
Fit to Trabant 601 Limousine, Universal and Kuebel.

original spare part
delivery complete cover
delivery without fuses

origial spare part no: 8811.11

36,44 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7475

Fuse box eigth fold Detail Fuse box inclusive 8 fuses. Wire connection with mounting screws. Type with 8 single places for fuses. Cover mede of clear glass plastic. Useable for Ifa cars and many Old- and Youngtimers.
18,24 €inclusive VAT, plus shipping costs temporary not available Art.No. 8036

Fuse box sixfold Detail Fuse box inclusive 6 fuses. Wire connection with mounting screws. Type with 6 single places for fuses. Cover mede of clear glass plastic. Useable for Ifa cars and many Old- and Youngtimers.
19,54 €inclusive VAT, plus shipping costs temporary not available Art.No. 8035

Display for rate of flow

Detail

display for rate of petrol flow, model with 7 LED

mounting diameter: 60 mm
made in Germany
complete with mounting clamp
supply voltage 12V

49,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6191

Display for rate of flow

Detail

display for rate of petrol flow, model with 7 LED

mounting diameter: 60 mm
made in Germany
complete with mounting clamp
supply voltage 12V

26,11 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6714

Sensor for display for rate of flow

Detail

Transmitter secound hand spare part for the display for rate of petrol flow.

made in Germany
complete with mounting clamp
supply voltage 12V

secound hand spare part

35,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7533

Float for transmitter fuel gauge

Detail

Plastic float for the sensor of the fuel gauge as an single part.
Fit to all vehicle models: Trabant 601, Trabant 1.1, Wartburg 353, Wartburg 1.3, Brakas B1000, Barkas B1000-1, Multicar.

material: fuel resistant plastic, colour: withe
made in Germany
one piece will be needed

25,90 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7460

Transmitter for fuel gauge

Detail

Sensor for fuel gauge with potentiometer for connection to all offert fuel gauges.
Mounting place: on top / inside of the fuel tank.
Scope of delivers complete with rubber sealing and float.

made in Germany
one piece will be needed

57,60 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6076

Sealing for transmitter fuel gauge

Detail

Rubber seal for the sensor of the fuel gauge as an single part.
Fit to all vehicle models: Trabant 601, Trabant 1.1, Wartburg 353, Wartburg 1.3, Brakas B1000, Barkas B1000-1, Multicar.

material: fuel resistant rubber, colour: black
made in Germany
one piece will be needed

4,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7461

fuel gauge white/black

Detail

fuel gauge with background colour white and black ring

mounting diameter: 60 mm
for use with art.no. 6076

New produced in Germany!

79,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6444

fuel gauge white/chrome

Detail

fuel gauge with background colour white and chromed ring

mounting diameter: 60 mm
for use with art.no. 6076

New produced in Germany!

79,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6443

fuel gauge black/black

Detail

fuel gauge with background colour black and black ring

mounting diameter: 60 mm
for use with art.no. 6076

New produced in Germany!

also fit to Multicar!

79,00 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6442

fuel gauge black/chrome

Detail

fuel gauge with background colour black and chromed ring

mounting diameter: 60 mm
for use with art.no. 6076

New produced in Germany!

also fit to Multicar!

79,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6441

fuel gauge (used)

Detail

red needle

black ring
mounting diameter: 60 mm
for use with art.no. 6076
please ask for availablitiy

34,67 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6135

Battery 6V 84Ah, dry ( not charched )

Detail

Batterie for cars with 6V supply voltage. The capacity is 84 Ah. The starting power is 240A.
We just deliver this battery dry and uncharched.
Design fit to historical vehicles.

length: 22,5 cm
wide: 17,5 cm
highness case: 20 cm
total highness inclusive pins: 22 cm
made in Germany

+7,50 Euro deposit

225,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1225

Plastic protection, wire tap

Detail

Plastic hose to protect the electrical wires at the mounted metal taps at the car body. Trabant engine compartment, car boot, passenger room.

PVC, lack
price per meter

6,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7675

Relais 12V 50A (changeover contact)

Detail

Additional relais for operating supply 12V DC with changeover contact. The maximum current 30 ampere.

5 x blade terminal connection pins (6 x 0,8mm
1x changeover contact (can be used as changeover-, make- or break contact
Max. continuous current with 12V DC: 40A (make contact no.87)/ 30A (break contact no.87a)
plastic case
dimensions: 28 x 28 x 25 mm (without mounting lug)

8,92 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6890

Relais 6V 30A

Detail

additional relais for operating supply 6V. The maximum current 30 ampere.

4 x connection pin
plastic case
dimensions: 27 x 27 x 14 mm
We don´t can ensure a permanent current of 30A. For permanent current up to about 15A
made in GDR

5,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6184

Fuse 8A

Detail

white fuse for current up to 8A

fit to all vehicles with this type of fuse

0,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1220

Fuse 16A

Detail

red fuse for current up to 16A

fit to all vehicles with this type of fuse

0,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1221

Fuse set

Detail

Torpedo-fuse kit ideal for traveles or for the daily use.
Delivery with resealable blister box.
Scope of delivery:

4x 8A (withe)
4x 16A (red)
2x 25A (blue)

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6437

Key switch Detail One grade switch made of Duro-plastic Can be used for 6,12 (120W) and 24V (150W) electrical systems. Best use for additional electrical units at Old- and Youngtimers.
original spare part number: 8600.21/1	1,95 €inclusive VAT, plus shipping costs temporary not available Art.No. 7590

Single grade pull switch Detail Small pull switch for mounting for example at the dashboards. Can be used for 6,12 and 24V electrical systems. Space saving frame size, best use for additional electrical units at Old- and Youngtimers.
original spare part number: 8600.23	4,76 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7589

Rocker switch rear window defroster

Detail

Angular single step switch with function light for mounting for example at the dashboards.
Colour of the switch: yellow
symbol: window defroster
Can be used for 6,12 and 24V electrical systems.
Space saving frame size, best use for additional electrical units at Old- and Youngtimers.
Delivery without bulbs, it will be for example glas base bulb 12V 1,2W one needed.

original spare part number: 8620.19/112

9,88 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7627

Voltage changer from 6V to 12V

Detail

DC/DC-voltage converter to run a 12V-device in a car with voltage of 6V

Technical data:

Input voltage: 5,5V up to 8V
Output voltage: 12V
Power rating: 10A
max. current consumption: 24A
Connectors: 2x blade terminal 6,3x0,8mm for input and output
Dimensions (WxHxD): 150mm x 85mm x 70mm
Weight: 0,6kg

118,20 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1200

Signal horn, 12V

Detail

universal signal horn for the supply voltage 12V.
Also for any type of vehicle with voltage of 12V (like Audi, VW, Opel, Ford and more).

galvaniced metal-body
inclusive grounding clip
made in Germany
one piece will be needed

17,46 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1205

Signal horn 6V

Detail

Universal signal horn for the supply voltage 6V.
Also for any type of vehicle with voltage of 6V.
Best use for Old-and Youngtimers.

metal-body, galvaniced / chrome
outside diameter: 98mm
inclusive grounding clip
one piece will be needed

19,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7618

Wiper motor 12 V, secound hand ( from 88 ) Detail The differnt between wiper motor, built in from year 1988 and later to the wiper motor up to 1987 is the form of motor shaft. To see on the picture below is the conical shaft of a wiper motor built-in from year 1988. In contrast to this wiper motor the wiper motor built-in up to year 1987 has a cylindrical shaft.
90,00 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 1116

Wiper motor 12 V ( from 88 ) Detail windscreen wiper motor built-in from year 1988 The differnt between wiper motor, built in from year 1988 and later to the wiper motor up to 1987 is the form of motor shaft. To see on the picture below is the conical shaft of a wiper motor built-in from year 1988. In contrast to this wiper motor the wiper motor built-in up to year 1987 has a cylindrical shaft.
95,30 €inclusive VAT, plus shipping costs temporary not available Art.No. 1115

Wiper motor 12 V, secound hand ( up to 87 ) Detail
90,00 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 1114

Wiper motor 6 V Detail Wiper engine for the Trabant with 6V electrical system. Original spare part. type: 6V, 5,5 Nm
original spare part number: 8741.26	72,30 €inclusive VAT, plus shipping costs temporary not available Art.No. 7706

Wiper motor 12 V ( up to 87 ) Detail The differnt between wiper motor, built in up to 1987 and later to the wiper motor built-in from year 1988 is the form of motor shaft. To see on the picture below is the cylindrical shaft of a wiper motor built-in up to year 1987. In contrast to this wiper motor the wiper motor built-in from year 1988 has a conical shaft.
95,68 €inclusive VAT, plus shipping costs temporary not available Art.No. 1113

Switch for rear wiper motor Detail Switch for the Trabant Universal (station wagon) electrical wiper motor rear screen
18,50 €inclusive VAT, plus shipping costs temporary not available Art.No. 7104

Switch and timing switch for wiper motor

Detail

Combination switch with 2 level timing,2 level of wiper speeds and button for screen water.
Switch for wiper motor 12V.
Delivery inklusive knob for Trabant-Types. The switch can be modificatet with the knob for Wartburg, Barkas, Multicar ec.

New produced spare part
one piece will be needed

53,63 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1117

Plug for socket, without pull relief

Detail

Double-pole plug for the standard socket.

for 6V and 12V
fit for many IFA-vehicles
without wire pull relief

3,93 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8121

Plug for socket, pull relief

Detail

Double-pole plug for the standard socket.

for 6V and 12V
fit for many IFA-vehicles
with screwed wire pull relief

18,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6240

Windscreen washer kit 6V

Detail

Set for windscreen washer system with electrical pump and water bottle
voltage: 6V
Scope of delivery:

bottle 1,5 liter
cap
metal holder
wash pump 6V

Ideal for upgrate the mechanical hand pump into an electrical system.

56,53 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7597

windscreen washer kit

Detail

Complete kit for windscreen washer system with electrical pump and water bottle
voltage: 12V
Scope of delivery:

bottle 1,5 liter
cap
metal holder
wash pump 12V
1m plastic hose (connection pump-spray jet
1 piece of two double jet washer inclusive retainer spring

fit to follow washer systems:
windscreen Trabant 601
Wartburg 353 and 1.3 Tourist rear window

56,53 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6907

electrical pump for windscreen washer Detail electrical pump to put into the water bottle of windscreen washer voltage: 12V fit to follow washer systems: windscreen Trabant 601 rear window Wartburg 353 and 1.3 TOURIST (only for estate wagon)
42,46 €inclusive VAT, plus shipping costs temporary not available Art.No. 1125

Water vessel for windscreen washer system, singel part Detail Water bottle for windscreen washer system, to use in tandem with electrical pump bottle Volume: 1,5 liter original spare part fit to follow washer systems: windscreen Trabant 601 Wartburg 353 and 1.3 TOURIST rear window single part without pump, cap and metal holder
parts-no. 136 65 730	33,80 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6908

Set of cable grommet seal

Detail

One set of cable grommet seals with different sizes.
Contens:

40 pieces body hole: 6mm / wire bore: 2mm
40 pieces body hole: 7,5mm / wire bore: 5mm
40 pieces body hole: 9mm / wire bore: 6mm
25 pieces body hole: 11mm / wire bore: 8,5mm
20 pieces body hole: 12mm / wire bore: 10mm
5 pieces body hole: 15mm / wire bore: 12mm
5 pieces body hole : 20,5mm / wire bore: 14,5mm
5 pieces body hole: 23,5mm / wire bore: 17,5mm

15,86 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8608

Rubber membrane plug for holes with diameter of 15mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 15 mm
inner diameter of membrane (max. usable diameter): 9 mm
outer diameter (total): 20 mm

0,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6796

Rubber membrane plug for holes with diameter of 18,5mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 18,5 mm (0,728")
inner diameter of membrane (max. usable diameter): 11 mm (0,433")
outer diameter (total): 23 mm (0,906")

0,97 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6895

Rubber membrane plug for holes with diameter of 25mm

Detail

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 25 mm
inner diameter of membrane (max. usable diameter): 18,5 mm
outer diameter (total): 30,5 mm
thickness: 7 mm

1,27 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7625

Rubber membrane plug for holes with diameter of 20,5mm

Detail

Membrane plug made of black rubber (Polychloropren) to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 20,5 mm
inner diameter of membrane (max. usable diameter): 13,5 mm
outer diameter (total): 25 mm
thickness: 7 mm

1,05 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6797

Rubber membrane plug for holes with diameter of 28mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 28 mm
inner diameter of membrane (max. usable diameter): 21 mm
outer diameter (total): 35 mm

1,57 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6798

Rubber membrane plug for holes with diameter of 32mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 32 mm
inner diameter of membrane (max. usable diameter): 25 mm
outer diameter (total): 39 mm
thicknes of the menbrane: 1mm
total thickness: 9mm

2,23 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7613

Rubber membrane plug for holes with diameter of 37mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 37 mm
inner diameter of membrane (max. usable diameter): 29 mm
outer diameter (total): 44 mm

1,75 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6799

Rubber membrane plug for holes with diameter of 47mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 47 mm
inner diameter of membrane (max. usable diameter): 36 mm
outer diameter (total): 54 mm
thicknes of the menbrane: 1mm
total thickness: 10mm

2,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6800

1+1

Connection wire starter-dynamo

Detail

Cable harness complete ready made for mounting.
Connection between starter motor and AC dynamo at the Trabant 601.
Red cable for batterie charge power and blue wire for charge control light.
The blue cable will be connected by plug to the main cable harness near the signal horn.
Fit to AC generator 12V Trabant

Two core dynamo harness, engine compartment
high quality reproduction
one piece will be needed
made in Germany

19,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7961

Electric fuel cock

Detail

Electical petrol valve (shut off vale) of the Trabant 601.
Easy to install beween the fuel hose form the petrol tank to the carburettor.

fit to all Trabant 500, 600 and 601 types
power: 12V
maximum reduction of the permanet leaking of the craburettors at stand
one piece will be needed
delivery inclusive electrical connecting cable

45,32 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8217

The complete offer in electrical installations and spare parts

* All prices inclusive VAT and plus shipping costs.