Front break parts

The complete offer in Front break parts

Brake shoe long, single part

Detail

Brake shoe complete with lining, fit to the Trabant 601 models Limousine, station wagon and kübel.

use for duplex brake system of Trabant 601 from vintage 01.04.1968
scopf of delivery: one piece
lining length: 215 mm
lining thickness: 4 mm
width: 30 mm
for brake drum diameter: 200 mm
For the front wheel brake 2 pieces will be needed for each one
For the rear brake 2 pieces will be needed for each one

8,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 308

Brake shoe long, single part, overhauled

Detail

Complete in Germany reclaimed brake shoe.
Brake shoe complete with lining, fit to the Trabant 601 models Limousine, station wagon and kübel.

use for duplex brake system of Trabant 601 from vintage 01.04.1968
scopf of delivery: one piece
lining length: 215 mm
lining thickness: 4 mm
width: 30 mm
for brake drum diameter: 200 mm
For the front wheel brake 2 pieces will be needed for each one
For the rear brake 2 pieces will be needed for each one

21,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7311

Oversize-brake shoe long, single part, overhauled

Detail

Complete in Germany reclaimed oversize brake shoe.
The lining thickness is more than 4 mm.
Brake shoe complete with lining, fit to the Trabant 601 models Limousine, station wagon and kübel.

use for duplex brake system of Trabant 601 from vintage 01.04.1968
scopf of delivery: one piece
lining length: 215 mm
width: 30 mm
from brake drum diameter: 202 mm
For the front wheel brake 2 pieces will be needed for each one
For the rear brake 2 pieces will be needed for each one

36,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7376

Brake shoe set front axle ATE

Detail

Complete set of brake shoes made by ATE with lining for repairing of one front axle right and left hand.
Fit to the Trabant 601 models Limousine, station wagon and kübel.

use for duplex brake system of Trabant 601 from vintage 01.04.1968
scopf of delivery: four piece
lining length: 215 mm
lining thickness: 4 mm
width: 30 mm
for brake drum diameter: 200 mm
For the front wheel brake one set will be needed for each one

47,84 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7270

Brake shoe set front axle (no name)

Detail

Complete set of brake shoes as an no mame product for low budget.
With lining for repairing of one front axle right and left hand.
Fit to the Trabant 601 models Limousine, station wagon and kübel.

use for duplex brake system of Trabant 601 from vintage 01.04.1968
scopf of delivery: four piece
lining length: 215 mm
lining thickness: 4 mm
width: 30 mm
for brake drum diameter: 200 mm
For the front wheel brake one set will be needed for each one

36,97 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8401

Brake shoe set Simplex front axle, overhauled Detail The set consists of four brake shoes fit to Trabant 500,600 and 601 with simplex front brake system. The brake shoes will be complete overhauled in Germany. Please note: your old brake shoes have to be shipped to us before we send you the spare part.
Old brake shoes have to be shiped to our company in advance!	95,20 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7321

Upper release spring ( long )

Detail

Spring for brake shoes front and rear axle.

length: 132 mm
diameter: 10 mm
galvaniced
made in EU
6 pieces will be needed for each car
made in Germany

2,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 314

bearing for sliding element

Detail

The bearing for silding element fit to:

sliding element front
2 pieces Trabant 601 front brake
sliding element rear
2 pieces Trabant 601 rear brake
sliding element rear
2 pieces Trabant 1,1 rear brake

2,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6335

Pressure spring spline end for brake shoes

Detail

Spring for the automatic adjuster of the break shoes at the brake base plate.
This spring press the look plate that the sliding element can work only in one direction.
fit to follow brake systems:

4 pieces for brake drum front axle Trabant 601
4 pieces for brake drum rear axle Trabant 601 or 1,1
2 pieces for trailer Qek with hydraulic brake system
delivery as an single part
made in Germany

additional needed tools for deassembly / assembly:

no special tools will be needed

2,30 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8264

Sliding element, complete, front brake

Detail

Front brake sliding element Trabant 601.
Consist of 1 paar, complete set for one brake:

2x sliding pin
2x holder
2x compressing spring
material: galvaniced metal
made in EU
one piece will be needed for each front brake

12,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 315

Holder single part steel

Detail

Spring bearing for the brake shoe holder can be used for Trabant 500- 601 front brake, Wartburg 353 and Wartburg 1,3.

material: steel
priece for each piece
two pieces will be needed for each brake shoe
delivery as an single part

3,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7098

Holder for brake shoe, complete set

Detail

Brake shoe holder can be used for Trabant 601 front brake.
Each set is for one brake shoe and consist of:

1x web
1x pressure spring
2x thrust bearing
galvaniced
made in EU

9,69 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 317

Brake drum ( single part ), slotted

Detail

The brake drum fit to the front and to the rear axle of Trabant 500, 600 and 601 (all 2-stroke typs).
Also useable for QEK-camper

circle of wheel bolts: 4 x 160 mm
diameter: 200 mm
made in EU
one piecewill be needed for each wheel

59,66 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 304

Brake drum set, slotted

Detail

The brake drum kit consist of two slotted brake drums.
Fit to the front and to the rear axle of Trabant 500, 600 and 601 (all 2-stroke typs).
Also useable for QEK-camper

circle of wheel bolts: 4 x 160 mm
diameter: 200 mm
made in EU
one set will be needed for each axle

price 44,11 Euro / piece

88,22 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7621

countersunk-head screw for brake drum

Detail

screw for brake drum Trabant

M6 x 10 mm
with hexagon socket
galvanized
one piece for each brake drum

0,63 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6214

Wheel brake cylider for the duplex brake system

Wheel-brake cylinder front, left hand ATE

Detail

Brake cylinder left hand for Trabant as an reproducition spare part from the brand manufacturer ATE.
Type: Duplex brake system.
Wheel brake cylinder for Trabant 601 front brake with brake drum.
scope of delivery:

made by ATE
complete with ring sleeves
without bleeder screw
brake-piston D= 22,2 mm
two pieces will be needed for one frontbrake

49,74 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8624

Wheel-brake cylinder front, left hand

Detail

Brake cylinder left hand for Trabant as an reproducition spare part.
Type: Duplex brake system.
Wheel brake cylinder for Trabant 601 front brake with brake drum.
scope of delivery:
{L[complete with ring sleeves][without bleeder screw][brake-piston D= 22,2 mm][two pieces will be needed for one frontbrake]

25,27 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 211

Wheel-brake cylinder front, left hand, no name

Detail

Brake cylinder left hand for Trabant as an reproducition spare part for low budget.
Type: Duplex brake system.
Wheel brake cylinder for Trabant 601 front brake with brake drum.
scope of delivery:

complete with ring sleeves
without bleeder screw
brake-piston D= 22,2 mm
two pieces will be needed for one frontbrake

20,09 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8210

Wheel-brake cylinder front, left hand, original

Detail

Complete in Germany overhauled wheel brake cylinder.
Type: RENAK BZ45
Shipping only after your old brake cylinder with the mark RENAK BZ45 was send to our company.
Wheel brake cylinder for Trabant 601 front brake with brake drum.
scope of delivery:

complete with ring sleeves
without bleeder screw
brake-piston D= 22,2 mm
two pieces will be needed for one frontbrake

Overhaul part, please send the brake cylinder BZ45 (original IFA) to our company in advance !

57,12 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7163

Wheel-brake cylinder front, right hand ATE

Detail

Brake cylinder right hand for Trabant as an reproducition spare part from the brand manufacturer ATE.
Type: Duplex brake system.
Wheel brake cylinder for Trabant 601 front brake with brake drum.
scope of delivery:

made by ATE
complete with ring sleeves
without bleeder screw
brake-piston D= 22,2 mm
two pieces will be needed for one frontbrake

49,74 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8625

Wheel-brake cylinder, complete, front, right hand

Detail

Brake cylinder right hand for Trabant as an reproducition spare part.
Type: Duplex brake system.
Wheel brake cylinder for Trabant 601 front brake with brake drum.
scope of delivery:
{L[complete with ring sleeves][without bleeder screw][brake-piston D= 22,2 mm][two pieces will be needed for one frontbrake]

25,27 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 210

Wheel-brake cylinder front, right hand, no name

Detail

Brake cylinder right hand for Trabant as an reproducition spare part as low budget product.
Type: Duplex brake system.
Wheel brake cylinder for Trabant 601 front brake with brake drum.
scope of delivery:

complete with ring sleeves
without bleeder screw
brake-piston D= 22,2 mm
two pieces will be needed for one frontbrake

20,09 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8211

Wheel-brake cylinder front, right hand, original

Detail

complete with ring sleeves
without bleeder screw
brake-piston D= 22,2 mm
two pieces will be needed for one frontbrake

Overhaul part, please send the brake cylinder BZ45 (original IFA) to our company in advance !

57,12 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7164

Ring sleeve set original, Ø 22 mm, front ( incl. 2 pieces )

Detail

Ring seals for Trabant front wheel brake cylinder

set consist of two ring sleeves
made in Germany
set include sleeves for one front wheel brake side (for two wheel brake cylinder)
for brake piston diameter 22,2 mm

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.

11,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7502

Plug original, Ø 22 mm, front ( incl. 2 pieces )

Detail

Rubber plug for dust sealing of the brake cylinder and guiding of the brake shoes for Trabant front wheel brake cylinder

set consist of two plug sleeves
made in Germany
set include sleeves for one front wheel brake side (for two wheel brake cylinder)
for brake piston diameter 22,2 mm

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder should be changed.

9,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8059

Ring sleeve set, Ø 22 mm, front

Detail

Ring sleeve set for Trabant front wheel brake cylinder. Made in Germany.

set include sleeves for one front wheel brake side (for two wheel brake cylinder)
for brake piston diameter 22,2 mm
made in Germany

20,12 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 216

Single parts Simlex whell brake cylinder

Simplex wheel-brake cylinder front, overhauled

Detail

Wheel brake cylinder (simplex) for the front brake system of the Trabant 500, 600 and 601.
Spare part is comlete overhauled. Please note, your old brake cylinder have to be shipped to us before we send you the spare part.
{L[complete with ring sleeves][brake pistion diameter 22,20mm][up to vintage: 31.3.1968 for Trabant 601][inclusive bleeder screw]

Please note, your old brake cylinder have to be shipped to us before we send you the spare part.

78,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7052

Set of cup sleeves front wheel brake cylinder Simplex, Trabant 601

Detail

Cup sleeve for wheel brake cylinder D=22,2mm front axle.

high quality reproduction
made in Germany (original manufactur)
2 pieces in one set
fit to Trabant 601 up to vintage 31.3.1968

The ring sleeve should only be changed, if inner surface of cylinder is okay.
Otherwise the complete wheel brake cylinder Simplex (part.No. 7052) should be changed.

8,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8246

Dust cup sleeves rear wheel brake cylinder Simplex, Trabant 601

Detail

Rubber sleeve as dust cap for repairing of the wheel brake cylinder type: Simplex. Protection for dirt, moisture and brake dust.
Can be mounted at the fornt and rear axle.

fit to Trabant 601 up to vintage 31.3.1968
delivery as an single part
two pieces will be needed for one brake cylinder (8 pieces for the complete Trabant)

9,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8247

paste for brake cylinders Detail special lubricants paste for brake cylinders no problems with brake fluid and rubber sleevs commended for new wheel brake cylinders
price 96,39 Euro / kg	17,35 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6204

mounting bolt for wheel brake cylinder

Detail

Bolt for wheel brake cylinder Trabant 601 front axle.

hexagon socket screw M8 x 16mm
strength class: 8.8
with external teeth lock washer
galvaniced
2 pieces will be needed for one wheel brake cylinder

0,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6436

Front brake hose

Detail

flexible front brake hose connection between Inner front brake line right hand or Inner front brake line left hand and Outer front brake line right hand or Outer front brake line left hand
Fit to Trabant 500,600 and 601 with type of Simplex and Duplex brake sytem.

high quality product
new reproduction made in EU
one piece for each wheel brake side

10,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 230

Front brake hose, TRW

Detail

Flexible front brake hose made by TRW, connection between Inner front brake line right hand or Inner front brake line left hand and Outer front brake line right hand or Outer front brake line left hand
Fit to Trabant 500,600 and 601 with type of Simplex and Duplex brake sytem.

high quality product
new reproduction made in EU
one piece for each wheel brake side

24,51 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8307

Bleeder screw, front

Detail

fit to front wheel brake cylinder Trabant 500,600,601 and wartburg 353 (older model with drum brake system at the fron axle).

galvaniced
one piece for each wheel side (front-brake) will be needed
the screw have to be fixed always at the upper wheel barke cylinder

3,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 213

Bleeder screw cap with tongue

Detail

Rubber cap with additional tongue fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.
The flap kibosh loosing the complete cap.

material: brake fluid resistant rubber
made in EU

1,68 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8446

Bleeder screw cap

Detail

fit to all offered bleeder screws
Protect the bleeder screw hole from dust and water.

material: rubber
made in Germany

0,65 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 215

Brake hose retainer, original style

Detail

sacer spring for connection between flexible brake hose and brake pipe

surface bronzing
one piece for each screw joint will be needed

2,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 240

Brake hose retainer

Detail

sacer spring for connection between flexible brake hose and brake pipe
not the same design like the originale one (made for VW). This retainer can be also used for Trabant and Wartburg.

electrogalvanized, black
high quality made in Germany, spring metal
one piece for each screw joint will be needed

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6624

Screw-cap for brakeline 4,75x0,7 Trabant Detail Screw-cap for breakline 4,75mm x 0,7mm fit to Trabant 500, 600, 601 and Trabant 1,1
0,92 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 264

Brake-cleaner, one packing unit, 12x Sprayer 600ml

Detail

Complete packing unit quick-cleaner for brake and clutch parts

FCKW free
content: 12x sprayer with volume of 600 ml

That implies a price of a single sprayer of 3,90 €price 6,50 Euro / liter

46,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7033

Brake-cleaner XXL 850ml

Detail

quick-cleaner for brake and clutch parts

FCKW, aceton free
volume: 850 ml
delivery as an single spray

price 5,29 Euro / liter

4,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7898

brake-cleaner 600ml

Detail

quick-cleaner for brake and clutch parts

FCKW free
volume: 600 ml
type: AD
delivery as an single spray

price 7,62 Euro / liter

4,57 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6252

Brake pipe spanner 10-11mm angled Detail Special tool for mounting or demounting of screw-cap for brakelines. type: level angleded Fit to brake screws SW10 and SW11.
12,47 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7702

Brake pipe spanner 10-11mm, straight Detail Special tool for mounting or demounting of screw-cap for brakelines. type: sraight Fit to brake screws SW10 and SW11.
9,86 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7703

Brake pipe spanner 12-13mm, straight Detail Special tool for mounting or demounting of screw-cap for brakelines. type: sraight Fit to brake screws SW12 and SW13.
12,43 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7992

Brake hose retainer for Steering knuckle leaver right hand

Detail

metal holder for the fron brake hose at the Trabant 500, 600 and 601 front axle right hand (codriver side).
Mouning at the rear side of the steering knuckle leaver bolt.
The retainer will also used at the lock plate for this screw connection.

original spare part
material: steel
delivery without any mounting bits
one piece will be needed

9,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7993

Brake hose retainer for Steering knuckle leaver left hand

Detail

metal holder for the fron brake hose at the Trabant 500, 600 and 601 front axle right hand (driver side).
Mouning at the rear side of the steering knuckle leaver bolt.
The retainer will also used at the lock plate for this screw connection.

original spare part
material: steel
delivery without any mounting bits
one piece will be needed

9,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7994

Retainer clip for release spring

Detail

Retainer for the release spring for push piece between the rear brake shoes.
Fit for all Trabant 500, 600, 601 and 1.1
Fit the the left and right rear brake.

Material: spring clip
Reproduction
2 pieces will be needed

3,37 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8561

The complete offer in Front break parts

* All prices inclusive VAT and plus shipping costs.