This site in german: Trabant 601 > Ersatzteile > Karosserie > Innenraum 
You are here: > Trabant 601> Spare parts> Body> inner room

inner room

The complete offer in inner room

Ashtray for dashboard

Ashtray box as original spare part fit to Trabant 601 (not useable for the old dashbord type) and Trabant 1.1.
68,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6179

ashtray for inside cladding

new original part
46,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6180

Coat hook and retaining strap

The hook and the retaining band for the rear passengers.
Mounted at the B-pillar at the driver and codriver side.
scop of delivery:
  • 1x hook
  • 1x retainer
  • 1x retaining strap
  • 1x mounting screw
  • Original-IFA-spare part
15,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7849

Spring clip for interior lining

Clip for mounting the door trim panels or the inner wheel covers. Fit to all types of Trabant, Wartburg, Barkas and many IFA vehicles.
  • material: spring steel, surface, galvaniced
0,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1160

Mounting bolt for interior lining

Special srew made of stainless steel.
0,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7745

Spring clamp for cover plate, rear door station wagon

Spring for coverplate air cooling housing Trabant two stroke motor and cover felt rear door station wagon.
  • material: matal, galvanized
  • made in EU
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1161

upper toothed segment front seat

Seat segment with 3 teeth fit to the most Trabant 601 and 1,1 front seats.
Mounting place: sidewards at the backrest, can be used for driver an codriver seats.
  • original spare part
  • one piec will be needed
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6629

Lower toothed segment of front seat

Seat segment with 8 teeth fit to the most Trabant 601 and 1,1 front seats.
Mounting place: sidewards at the sitting area, can be used for driver an codriver seats.
  • original spare part
  • one piec will be needed
5,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6628

Inner rear view mirror

Panorama mirror for the Tranant indoor in best quality.
The spare part is original made in Germany (NOS).
  • lenght: 24,5 cm
  • wide: 7 cm
  • delivery inclusive plastic feet for mounting at the roof frame
55,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 1171

Rubber lining EU for brake and clutch pedal-shaft

Rubber pad for the clutch and brake pedal.
  • material: rubber, black
  • made in EU
  • worse qulity
  • two pieces will be needed
3,95 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8013

Rubber lining made in Germany for brake and clutch pedal-shaft

Rubber pad for the clutch and brake pedal.
New reproduction made in Germany in brilliant quality.
Fit to many IFA cars like Trabant, P70/F8, Wartburg 311, Multicar...
  • material: rubber, black
  • made in Germany
  • best quality
  • two pieces will be needed
12,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 184

Foot lever clutch

Foot lever for the mecanical actuated cluch system of the Trabant 601 and 1,1.
24,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7127

Foot lever unit ( overhauled )

Foot lever unit constist of one lever for the hydraulic actuated brake system and one lever for the mechanical actuated cluch system. The set is complete in Germany refreshed and pre-installed.
110,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 185

release spring for pedal, late model

release spring fit to brake pedal and clutch pedal of pedal unit
length of the spring coil: 53mm
diameter of the spring coil: 10mm
total length of the spring: ca.122mm
  • fit to Trabant 601 and Trabant 1.1
  • two pieces will be needed
1,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6643

release spring for pedal, old model

release spring fit to brake pedal and clutch pedal of pedal unit
length of the spring coil: 69mm
diameter of the spring coil: 8mm
total length of the spring: ca.160mm
  • fit to Trabant 601
  • two pieces will be needed
1,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7372

Rubber carpet rear boot, station wagon, coil spring

Elaborate made and exactly cuted carped for the Trabant 601 Universal boot.
  • material: corrugated rubber, with nonslip bottom and fringe
  • made in Germany
75,45 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7277

Rubber carpet rear boot, station wagon, leaf spring

Elaborate made and exactly cuted carped for the Trabant 601 Universal boot.
  • material: corrugated rubber, with nonslip bottom and fringe
  • made in Germany
68,50 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7296

Carpet front, black

Simpel cuttet carped for the front passangers. Best use to protect the original carpets.
Elaborate made and exactly cuted carped for the Trabant 601 from vintage 1984 (without mechanical high beam switch).
  • material: typ NOBLESS high quality soft velours, with rubber bottom and fringe, with nonslip bottom and fringe
  • made in Germany
46,27 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8187

Rubber carpet front, black

Elaborate made and exactly cuted carped for the Trabant 601 from vintage 1984 (without mechanical high beam switch).
  • material: corrugated rubber, with nonslip bottom and fringe
  • made in Germany
59,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6850

Plug for body

Small plug for holes diameter 5mm.
Can be used for the car body.
  • material: rubber, black
  • total length: 27mm
  • made in Germany
2,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7705

Sealing for bowden wires

Small rubber plug to seal the cables and bowden wires through the bulkhead from the passenger compartment to the Trabi engine compartment.
Can be used for choke and 2x heating control wires (heating´mixing chamber)
  • material: rubber, black
  • for Trabant, all types
  • made in Germany
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8147

Interior lamp

Lamp for the Trabant 601 and 1,1 interior.
For the insert will be nedded:
1x tubular bulb 6V: LDM-no.: 121
1x tubular bulb 12V: LDM-no.: 135
  • original spare part
  • delivery without bulb
original spare part no. 8838-173
12,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 98

rubber mat for front wheel house, left side original

black mat with knobs made of black rubber

will be glued inside the car on the left wheel house
16,44 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6488

rubber mat for front wheel house, right side original

black mat with knobs made of black rubber

will be glued inside the car on the right wheel house
16,44 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6487

Set of rubber mat for front wheel house

One set of black mats with knobs made of black rubber.
This rubber protect the steel wheel house inside of the passenger cabin against wastage by feets. Also it is be needed for sound damping.
The rubber will be sticked at the wheel housing 1x driver side und 1x codriver side.
We recommended our offered Contact adhesive 350ml (LDM-part.-Nr.:8308).
  • fit for all Trabant 601 and 1,1
  • Reproduction made in Germany
  • Mounting place: passenger room wheel housing front left and rifgt hand
  • one set will be needed
59,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8329

Rubber carpet rear, black

Elaborate made and exactly cuted carped for the Trabant 601 rear seats.
  • material: corrugated rubber, with nonslip bottom and fringe
  • made in Germany
42,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8450

Mounting bolt for foot lever unit

Mounting screw for foot lever unit.
  • fit to Trabant 601 and Trabant 1,1
  • scope of delivery inclusive 1x bolt, 1x Washer, 1x spring washer
  • 4 pieces will be needed
1,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8522

Plastic protection, wire tap

Plastic hose to protect the electrical wires at the mounted metal taps at the car body. Trabant engine compartment, car boot, passenger room.
  • PVC, lack
  • price per meter
6,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7675

Mounting screws direction indicator switch / steering cover

One kit of mounting screws for the plastic steering cover of the Trabant 601
contens:
  • 3x self-tapping screw (stainless steel)
  • 4x pan head screw (stainless steel)

  • one set will be needed
2,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8555
The complete offer in inner room

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas