Accessories

Category Accessories has the following subcategorys:

The complete offer in Accessories

Rubber cover for ignition key

Grip rubber for mounting at the ignition key.
This spare part is an original one.
Fit for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.

material: rubber, black
original spare parts
delivery as an single part

9,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8193

Delivery only at advance payment.

Spare key, copy is made from yor key number

Detail

Production of an spare key for door, ignition or fuel cap looks and so on...
You have to tell us your key number per email, fax or letter.
Keys for the vehicles: Trabant, Wartburg, W50, Barkas LO, LD Multicar usw.

delivery time about one to two weeks
all Trabant 601 / Trabant 1,1, Wartburg 353 / Wartburg 1,3 and Brakas B1000/ B100-1 keys possible

Please write here your keynumber in:
Reproduction time for key ca. 2-3 Wochen !!!nfertigung auf Kundenwunsch, KEINE Rücknahme, Umtausch oder Stornierung / Widerruf nach Zahlungseingang!

29,75 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1341

Delivery only at advance payment.

Fuel cans 10L

Detail

Petrol cans made of 0,9mm steel.
Can be used for diesel, petrol and 2 stroke fuel with oil.
Best use for Old and Youngtimer

made of metal
Volume: 10L
colour: oliv green
with secure pin for closure
UN-certification

58,83 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1340

Speedometer T601

Detail

Round tachometer for the speed of the Trabant 601
The spedometer is an genuine spare part and was mounted at the most types of Trabant 601 Limousine and Universal(station wagon) except model 1968.

speed display: 120km/h
slot for alternator control light (red)
slot for indicator control light (green)
slot for high beam control light (blue)
mounting diameter: 100mm
tachoneedle colour: red

89,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7355

Number plate holder with printed trademark black/blue

Detail

16,21 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1301

Number plate holder with printed trademark black/orange

Detail

16,21 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1302

Number plate holder with printed trademark black/white

Detail

16,21 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1303

1+1

Spare Part Catalogue for Trabant 601, germ./ english Detail
38,70 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 1330 Delivery only at advance payment.

Splint-pin set, 555 pices

Detail

Splint-pin set, complete with clear plastic box.
Consist of 555 differnt splint diameters and sizes. Electrogalvanized, DIN 94.
scope of dlivery:

1,6 x 32 (150 pieces)
2,4 x 25 (150 pieces)
2,4 x 38 (100 pieces)
3,2 x 32 (75 pieces)
3,2 x 50 (50 pieces)
4,0 x 64 (30 pieces)

17,03 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7739

Splint-pin set, complete with metal box

Detail

Splint-pin set, complete with metal box.Consist of 1150 differnt splint diameters and sizes. Electrogalvanized, DIN 94.
scope of dlivery:

1,6 x 32 (100 pieces)
2 x 22 (100 pieces)
2 x 32 (100 pieces)
2 x 40 (100 pieces)
3,2 x 20 (100 pieces)
3,2 x 32 (100 pieces)
3,2 x 40 (100 pieces)
4 x 32 (100 pieces)
4 x 40 (100 pieces)
4 x 50 (100 pieces)
5 x 40 (50 pieces)
5 x 50 (50 pieces)

72,35 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1342

Fuel tank plug with trademark ( S ), polished

Detail

Plug for Trabant 500,600,601 with stamped trademark.
Super quality

material: aluminium, polished
made in EU

32,13 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1241

Fuel tank plug, NOS

Detail

Aluminium filler cap for Trabant 500, 600, 601. Scope of delivery inclusive sealing rubber ring and flush protection.

original spare part

55,00 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6277

Fuel tank plug, polished

Detail

original fuel tank plug for Trabant 500,600,601
polished by LDM-tuning

inclusive rubber sealing
original spare part

68,00 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6324

Fuel tank plug, secound hand

Detail

Plug for petrol tank. Fit for Trabant 500,600,601.
Secound hand part.

material: aluminium
original spare part

38,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1240

Mudflaps set rear

Detail

Rubber dirttraps four monting at the back side of the Trabant wheel case. Type with stamped S-trademark.

delivery inclusive 2x mounting metal strips
set consist of two pieces
dimension: 20 x 20 cm, thickness: 5 mm
material: rubber, black
one set will be needed

14,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1230

Intake line for windscreen washer (ID=5mm)

Detail

Plastic hose for windscreen cleaning system with the inside diameter of 5 mm.

Price for each meter
If you want more as one meter please just order more pieces
made in Germany

Price: 1,93 Euro / Meter

1,93 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6883

Intake line for windscreen washer (ID=4mm)

Detail

Plastic hose for windscreen cleaning system with the inside diameter of 4 mm.

Price for each meter
If you want more as one meter please just order more pieces
made in Germany

Price: 1,93 Euro / Meter

1,93 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1127

Suction pump for windscreen washer

Detail

Mechanical operating pump for the windshield cleaning system.
Fit to Trabant 500, 600 and 601.

original spare part
delivery pree mounted part inclusive attachment nut

32,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1126

Wiper blade ( 270mm )

Detail

Wiper blade single part. Fit to al older wiper types of the Trabant 500, 600 or 601 (does not fit to CZ models).

length: 270 mm
material: treaded rubber
original spare part
delivery without mounting parts
two pieces will be needed

5,00 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1118

Plastic cap for wiper arm

Detail

Sealing cap (single part) for the mounting place of the wiper arm.
Fit to CZ models Trabant, Wartburg and B1000.
Can be used for screw joints spanner gap SW 13.

material: plastic, black
original spare part
two pieces will be needed for models of Limousine
station wagons will need three of this spare part

0,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7440

Delivery only at advance payment.

Plastic cap set for wheel nut, black

Detail

cheapest type of plastic cap for all wheel nuts with a spanner gap of 19mm

material: made of black plastic
set consist of 20 pieces

The grip of the plastic cups on the wheel nuts is not the best. Additionall means should be used (for instance: adhesive lubricant, Art.No. 6255 or better universal housing seal, demountable, Art.No. 6258).

price for one piece: 0,66 €

13,01 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6366

Plastic cap set for wheel nut, chrome

Detail

cheapest type of plastic cap for all wheel nuts with a spanner gap of 19mm

made of chromed plastic
set consist of 20 pieces

price for one piece: 0,63 €

12,53 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6367

Plastic cap for wheel nut

Detail

Cap for wheel nuts and wheel bolts with a spanner gap of 19 mm.
Type with additional collar and hemisphere.

single part
PVC, black
for each car 16 pieces will be needed

0,45 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1085

Plastic cap for wheel nut

Detail

plastic cup for wheel nuts
for all wheel nuts and wheel bolts with a spanner gap of 19mm

Material: plastic, black
same shape like original plastic cup for wheel nuts of Trabant 601
for each wheel, 4 pieces will be needed

2,05 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6438

Plastic cap for wheel nut, chrom effect (set of 16 pieces)

Detail

plastic cup for wheel nuts
for all wheel nuts and wheel bolts with a spanner gap of 19mm

set of sixteen pieces
made of chromed plastic
made in EU

price for one piece: 0,43€

9,44 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6430

Hub cap , plastic

Detail

Plastic cover for the Trabant wheel hub. Fit to conical and cylindrical hubs.

material: plastic, black
made in EU
for each wheel one piece will be needed

8,90 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1087

Fuel dip stick

Detail

Fit to all Trabant with two stroke engine.

material: plastic, black
scaling: 2-24 liter
length: 28 cm
made in EU

5,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1111

Brass cover for exhaustround, chromium-plate

Detail

Universal brass cover for exhaust, chromium-plate 44 x 130 mm
fit for all Trabant

19,24 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 1090

Brass cover for exhaust, chromium-plate

Detail

Universal cover for exhaust, chromium-plate 48 x 120 mm,
round-convoluted-transversal cuted
fit to pipe diameter 24 - 48 mm

19,24 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6302

Brass cover for exhaust, chromium-plate, angular

Detail

Universal brass cover for exhaust, chromium-plate 70 x 57 x 145 mm,
angular-transversal cuted
fit to pipe diameter 30 - 50 mm
for all Trabant

14,99 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6301

T-Shirt LDM-Tuning, white Detail white T-Shirt made of 100% cotton printed lettering on front- and back-side size: M
11,99 €inclusive VAT, plus shipping costs temporary not available Art.No. 6425

Bulb retainer display instruments, screw pin

Detail

Holder for bulbs with screw pin for wire connection. Can be used for nearly all IFA vehicles.
Type with contact for screw connection: up tp 1,5 mmm².
Useabe for bulbs 6V, 12V oder 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.

new spare part
delivery without bulb

6,10 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7844

Retro back up lamp for rear bumper

Detail

Chromed back up light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.

colour: chromium-plated casing, clear glass
size: 11 x 5,5 cm
delivery without bulb
made in Germany
with E-icon

184,10 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 6876

Delivery only at advance payment.

Bulb retainer display instruments

Detail

Holder for bulbs as an checked secound hand part. Can be used for nearly all IFA vehicles.
Type with contact pin for wire plug: 6,3x0,8 (standart)
Useabe for bulbs 6V, 12V oder 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.

delivery without bulb and pin
new Reproduction

4,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7843

Retro rear fog lamp for rear bumper

Detail

Chromed reversing fog light for the mounting on top of the bumber.
The lamp made of high end fabrication and the design fit brilliant to historical cars.

colour: chromium-plated casing, red glass
size: 11 x 5,5 cm
delivery without bulb
made in Germany
with E-icon

210,36 €inclusive VAT, plus shipping costs

Art.No. 6877

Delivery only at advance payment.

Retro licence plate lights

Detail

Chromed reversing registration plate light.
Mounting with two M6 nuts.
The lamp made of high end fabrication and the design fit brilliant to historical cars.

colour: chromium-plated casing, clear lense
size: L=82mm x B=29mm x H=27mm
bolt distance: 45mm
delivery without bulb
made in Europe
mit E-Zeichen

16,86 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7989

Replacement glass for RETRO reverse lamp

Detail

Red glass as spare part for our RETRO reverse indication lamp

material: clear (white) glass
made in Germany

8,93 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7137

Replacement glass for RETRO rear fog lamp

Detail

Red glass as spare part for our RETRO fog light

material: red glass
made in Germany

19,99 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7136

Universal boot kit

Detail

Bellows for many exertions at automobiles, trailers, caravans and ships ...
size:

length:19cm diameter:10mm / 30mm
length:23cm diameter: 35mm / 35mm
length:15cm diameter:30mm / 42mm
length:13cm diameter:41mm / 48mm
length:12cm diameter:41mm / 55mm
different length and diameter combinable
length of the bellow pice: 95mm

17,28 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7010

Cap for water vessel for windscreen washer system Detail Plastic cap with mounting sprap for the water bottle of the windscreen washer system. The plug close up the refilling hole. To use at many reservoir bottles with electrical or mechanical pump. fit to follow washer systems: Trabant 601, Trabant 1.1, Wartburg 1.3, Wartburg 353, Multicar, W50 and so on
4,75 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7357

Outer rear view mirror, complete, black

Detail

Outer rear view mirror. This part is an reproduction in good quality made in EU.
It can be used for the right (codriver side) or the left (driver side).
The mirror is mounted at the door fram right or left hand.

Can be used for Trabant and Wartburg
colour black
delivery complete pree mounted with mirror glas
one or two pieces will be needed

23,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1170

Inner rear view mirror

Detail

Panorama mirror for the Tranant indoor in best quality.
The spare part is original made in Germany (NOS).

lenght: 24,5 cm
wide: 7 cm
delivery inclusive plastic feet for mounting at the roof frame

55,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1171

Outer rear view mirror, original, without clamp

Detail

Outer rear view mirror for Trabant 601. This part is an original IFA-spare part made in Germany.
It can be used for the right (codriver side) or the left (driver side).
The mirror is mounted at the door fram right or left hand.
Please choose your favoured color at the bottom button.

delivery without holder and clamp, may be can be used from your old mirror
scop of delivery inclusive mirror glas
one or two pieces will be needed

colour of the mirror:

35,50 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7287

Glas for rear view mirror 132x92mm

Detail

Spare glas for the outer rear view mirror for Trabant 601. This part is an reproduction.
It can be used for the right (codriver side) or the left (driver side).
Fit to the Trabant mirrors are mounted at the door fram right or left hand.

delivery as a single part
one or two pieces will be needed

4,07 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7938

Plastic frame for glas for rear view mirror 132x92mm

Detail

Black spare frame for the outer rear view mirror for Trabant 601. This part is an reproduction.
It can be used for the right (codriver side) or the left (driver side).
Fit to the Trabant mirrors are mounted at the door fram right or left hand.

delivery as a single part
one or two pieces will be needed

1,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7939

Interior lamp

Detail

Lamp for the Trabant 601 and 1,1 interior.
For the insert will be nedded:
1x tubular bulb 6V: LDM-no.: 121
1x tubular bulb 12V: LDM-no.: 135

original spare part
delivery without bulb

original spare part no. 8838-173

12,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 98

Bulb retainer display instruments, additional negative terminal

Detail

Holder for bulbs as an new reproduction part. Can be used for nearly all IFA vehicles.
Type with two contact pins for wire plug: 6,3x0,8 (standart)
1x pin for plus terminal (+) and 1x pin for negative pin (-)
Useabe for bulbs 6V 2W or 12V 2W with Ba7S base as speedometer lightning, display and indecator lights.

New repoduction
delivery without bulb
made in EU

3,80 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 8443

Steering wheel, old version Detail Steering wheel for Trabant 601. The spare part is an new production in Europe Mounting at the steering column by grooved taper pin. One piece will be needed Material: steel ring with plastic, colour black.
114,24 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 8479

Steering wheel, secound hand part Detail Foamed material steering wheel for Trabant 601 and Trabant 1.1 The spare part is an secound hand part, compelete checked and cleaned. Mounting at the steering column by grooved taper pin. One piece will be needed Material: steel ring with formed plastic, colour black.
56,52 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7523

Set air deflector for Trabant doors

Detail

One set of air deflectors for Trabant 601 and Trabant 1.1 doors.
Kit consitst of:

1x air deflector for drivers door, left hand
1x air deflector for co-drivers door, right hand

Genuie spare part (NOS). One set will be needed.

80,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1145

Delivery only at advance payment.

Steering wheel Detail Foamed material steering wheel for Trabant 601 and Trabant 1.1 Mounting at the steering column by grooved taper pin. One piece will be needed Material: steel ring with formed plastic, colour black.
114,48 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 8666

Outer rear view mirror, complete, silver

Detail

Can be used for Trabant and Wartburg
colour silver (aluminium style)
delivery complete pree mounted with mirror glas
one or two pieces will be needed

23,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8675

The complete offer in Accessories

* All prices inclusive VAT and plus shipping costs.