This site in german: IFA-Fahrzeuge > Trabant 500/600 > Elektrik 
You are here: > IFA-vehicles> Trabant 500/600> electrical system

electrical system

The product category IFA-vehicles > Trabant 500/600 > electrical system is spread over 3 sites:

Field Ciol I for dynamo 6V

Stator coil (Field coil no.1) for mounting inside of the dynamo case.
The connecion wires have to be solided at the contacts.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)
  • Single spare part, without mounting bits
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-110
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7816

Field Ciol II for dynamo 6V

Stator coil (Field coil no.2) for mounting inside of the dynamo case.
The connecion wires have to be solided at the contacts.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)
  • Single spare part, without mounting bits
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-120
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7817

Retainer for contact rail

Tinned metal pice to solder the wire of the field coil at the middle contact (D-).
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • one piece will be needed
original spare part number: 8001.4/1-100:1(5)
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7812

Retainer for Ball bearing Trunnion bearing A-S

Mounting holder for the grooved ball bearing at the trunnion bearing A-S front side.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part, delivery mounting screws
  • original spare part
  • one piece will be needed
original spare part number: 8001.4-200:2
3,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7802

Ball bearing for Dynamo ( old type )

Grooved ball bearing to retain the dynamo armature at teh case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part, delivery without mounting bits
  • high quality made by FAG
  • two pieces will be needed
8,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7796

Dust cap for ball bearing trunnion bearing rear

Metal cap for protection of the grooved ball bearing at the trunnion bearing A-S rear side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • outside diameter: 34mm
  • inside diameter: 15mm
  • one piece will be needed
original spare part number: 8001.4-200:6
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7804

Dust cap for ball bearing trunnion bearing A-S

Metal cap for protection the grooved ball bearing at the trunnion bearing A-S front side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • outside diameter: 29mm
  • inside diameter: 15mm
  • one piece will be needed
original spare part number: 8001.4-200:3
1,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7803

Trunnion bearing A-S dynamo older type

Rear side trunnion bearing complete with pre-installed brushes and pressure springs. Best use for overhauling.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part without mounting equipment and bearing
  • original spare part
  • one piece will be needed
original spare part number: 8001.5-300
62,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7807

Pin bolt for dynamo older type

Special pin for mounting the front and rear trunnion bearing A-S at the dynamo base case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)
  • Single spare part
  • original spare part
  • thread: M5
  • length: 170mm
  • two pieces will be needed
original spare part number: 8001.4-000:4
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7805
The product category IFA-vehicles > Trabant 500/600 > electrical system is spread over 3 sites:
123
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas