electrical system

The complete offer in electrical system

cable for positive pole of car battery

Detail

Cconnection cable for Trabant 500 / 600 between positive pole of car battery and the terminal screw of starter.

pre-finished
one cable tail with battery pole terminal
one cable tail with 8mm cable shoe for terminal screw of solenoid switch (mounted on starter)
thick and robust isolation (outer diameter: 13,3mm)
new made in Germany

45,73 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8601

ground cable for car battery

Detail

Connection cable Trabant 500 and 600 between negative pole of car battery and the mounting screw of gearbox and engine (earth-connection, ground).

pre-finished
one cable tail with battery pole terminal
one cable tail with 8mm cable shoe
thick and robust isolation (outer diameter: 13,3mm)
new made in Germany

30,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8600

Ignition coil 6V, diameter 40mm

Detail

This coils can be used for Trabant 500, 600 and 601, Wartburg 313 and Wartburg 313, Framo with voltage of 6V.
Made in Europe.
Sizes:

diameter: 40mm
total lenght:130mm
length of the aluminium case: 92mm
threads for connection wires: M4

18,77 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7987

Ignition coil 6V, diameter 40mm, Germany

Detail

This coils can be used for Trabant 500, 600 and 601, Wartburg 313 and Wartburg 313, Framo with voltage of 6V.
Original spare part.
Sizes:

diameter: 40mm
total lenght:130mm
length of the aluminium case: 92mm
threads for connection wires: M4

67,33 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7990

Ignition coil 6V, diameter 62mm

Detail

This coils can be used for Trabant 500, 600 and 601, Wartburg 313 and Wartburg 313, Framo with voltage of 6V.
Original spare part.
Sizes:

diameter: 62mm
total lenght:156mm
length of the aluminium case: 121mm
threads for connection wires:M5
made in Germany

original spare part number: 8351.103/6

55,72 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 810

Armature for dynamo 6V

Detail

Dynamo rotour as an single part.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)

Single spare part, without bearings or mounting bits
original spare part
one piece will be needed

original spare part number: 8001.5-210

36,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7806

Contact box for dynamo older type

Detail

Wire connection terminal box for mounting at the dynamo case.
Delivery inclusive contact for wires DF and D+. Inclusive clamp bolt for connection the brushes.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part
original spare part
one piece will be needed

original spare part number: 8001.5-130

28,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7811

Wire clip for contact box

Detail

U-bolt to mount the cover on top of the connection terminal box
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part
original spare part
one piece will be needed

original spare part number: 8001.4/1-000:1

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7813

Brush spring for dynamo older type

Detail

Spring for the brushes to connect the rotor.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part
original spare part
two pieces will be needed

original spare part number: 8001.4/1-300:7/2

5,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7808

Field Ciol I for dynamo 6V

Detail

Stator coil (Field coil no.1) for mounting inside of the dynamo case.
The connecion wires have to be solided at the contacts.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)

Single spare part, without mounting bits
original spare part
one piece will be needed

original spare part number: 8001.4/1-110

23,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7816

Field Ciol II for dynamo 6V

Detail

Stator coil (Field coil no.2) for mounting inside of the dynamo case.
The connecion wires have to be solided at the contacts.
Best use for refresh the dynamo.
Fit to direct current dynamos with 6V.
Useabe for the car types:
Trabant 500,600,601
Barkas V901 (Framo)

Single spare part, without mounting bits
original spare part
one piece will be needed

original spare part number: 8001.4/1-120

23,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7817

Retainer for contact rail

Detail

Tinned metal pice to solder the wire of the field coil at the middle contact (D-).
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part
original spare part
one piece will be needed

original spare part number: 8001.4/1-100:1(5)

0,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7812

Retainer for Ball bearing Trunnion bearing A-S

Detail

Mounting holder for the grooved ball bearing at the trunnion bearing A-S front side.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part, delivery mounting screws
original spare part
one piece will be needed

original spare part number: 8001.4-200:2

3,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7802

Ball bearing for Dynamo ( old type )

Detail

Grooved ball bearing to retain the dynamo armature at teh case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part, delivery without mounting bits
high quality made by FAG
two pieces will be needed

8,51 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7796

Dust cap for ball bearing trunnion bearing rear

Detail

Metal cap for protection of the grooved ball bearing at the trunnion bearing A-S rear side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part
original spare part
outside diameter: 34mm
inside diameter: 15mm
one piece will be needed

original spare part number: 8001.4-200:6

1,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7804

Dust cap for ball bearing trunnion bearing A-S

Detail

Metal cap for protection the grooved ball bearing at the trunnion bearing A-S front side agianst dust and dirt.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part
original spare part
outside diameter: 29mm
inside diameter: 15mm
one piece will be needed

original spare part number: 8001.4-200:3

1,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7803

Trunnion bearing A-S dynamo older type

Detail

Rear side trunnion bearing complete with pre-installed brushes and pressure springs. Best use for overhauling.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part without mounting equipment and bearing
original spare part
one piece will be needed

original spare part number: 8001.5-300

62,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7807

Pin bolt for dynamo older type

Detail

Special pin for mounting the front and rear trunnion bearing A-S at the dynamo base case.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part
original spare part
thread: M5
length: 170mm
two pieces will be needed

original spare part number: 8001.4-000:4

2,25 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7805

Contact rail for dynamo older type

Detail

Middle contact for connection the wire D- at the electrical box.
Fit to direct current dynamos with 6V or 12V.
Useabe for the car types:
Trabant 500,600,601
Wartburg 311,312,313,353
Barkas V901 (Framo)

Single spare part
original spare part
one piece will be needed

original spare part number: 8001.5-101

6,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7809

Cap for Ignition coil

Detail

Rubber cap for connection wires pin 1 and pin 15 at the ignition coils.
Useable for the 40mm and original 60mm coils with ring pin connection.

material: rubber, black

1,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7991

Fuse box sixfold Detail Fuse box inclusive 6 fuses. Wire connection with mounting screws. Type with 6 single places for fuses. Cover mede of clear glass plastic. Useable for Ifa cars and many Old- and Youngtimers.
19,54 €inclusive VAT, plus shipping costs temporary not available Art.No. 8035

Fuse box eigth fold Detail Fuse box inclusive 8 fuses. Wire connection with mounting screws. Type with 8 single places for fuses. Cover mede of clear glass plastic. Useable for Ifa cars and many Old- and Youngtimers.
18,24 €inclusive VAT, plus shipping costs temporary not available Art.No. 8036