Fuel sytem

The product category Wartburg 1.3 > Spare parts > Fuel sytem is spread over 9 sites:

Tick-over valve

Control unit for handling the overrun cut-off at the four stroke engine.
Fit to the following vehicles with the carburettor types:

32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1

73,42 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 757

Aluminium-ring 12mm for carburettor

Detail

Special metal sealing sealing as single part.
This Aluring is extra made fur this carburettor umit.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:

32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1

outside diameter: 12mm
inside diameter: 7mm
thickness: 1mm
material: aluminium selaning
one piece will be needed

3,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8261

Aluminium-ring 10mm for carburettor

Detail

32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1

outside diameter: 10mm
inside diameter: 6,8mm
thickness: 1,2mm
material: aluminium selaning
one piece will be needed

3,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8262

Aluminium-ring 13,8mm for carburettor

Detail

32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1

outside diameter: 13,8mm
inside diameter: 10,3mm
thickness: 1mm
material: aluminium selaning
one piece will be needed

3,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8263

Sealing ring for fuel tank plug

Detail

Special copper ring with mineral fibre to seal the drain plug at the petrol tank bottom side.
Fit to all kind of Wartburg Wartburg 311, 312, 313 Limousine, Cabrio, Camping, Coupe as well to Wartburg353 and 1,3 Limousine, Tourist and Trans.

material: copper
special pressing ring
only one time useable

1,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8173

Fuel tank plug, single Part

Detail

Screw for the Wartburg petrol tank, special made of stainless steel.
Fit to all kind of Wartburg Wartburg 311, 312, 313 Limousine, Cabrio, Camping, Coupe as well to Wartburg353 and 1,3 Limousine, Tourist and Trans.

material: stainless steel
made in Germany
Delivery without sealings and without the small drain plug
one piece will be needed

15,15 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8517

Fuel tank plug, set

Detail

Kit of screw (plug) for the Wartburg petrol tank.
The special screw is made of stainless steel.
Fit to all kind of Wartburg Wartburg 311, 312, 313 Limousine, Cabrio, Camping, Coupe as well to Wartburg353 and 1,3 Limousine, Tourist and Trans.

made in Germany
Scope of delivery: 1x special fuel tank plug, 2x sealings (copper), 1x small drain plug (stainless steel)
one set will be needed

17,10 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8518

Spring for tank plate

Detail

Torsion spring for hinged plate, fit to Wartburg 353 and Wartburg 1,3.
Will be mounted on the tank plate and car body.
The spring supports the closing of the hinged plate.

material: steel
surface: galvaniced
one piece will be needed
delivery as an single part

Original spare part number: 1342921001296301

8,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8548

Float for transmitter fuel gauge

Detail

Plastic float for the sensor of the fuel gauge as an single part.
Fit to all vehicle models: Trabant 601, Trabant 1.1, Wartburg 353, Wartburg 1.3, Brakas B1000, Barkas B1000-1, Multicar.

material: fuel resistant plastic, colour: withe
made in Germany
one piece will be needed

25,90 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7460

Transmitter for fuel gauge

Detail

Sensor for fuel gauge with potentiometer for connection to all offert fuel gauges.
Mounting place: on top / inside of the fuel tank.
Complete with rubber sealing and float. Fit to Wartburg 353 and Wartburg 1,3.