This site in german: Wartburg 1.3 > Ersatzteile > Kraftstoffsystem 
You are here: > Wartburg 1.3> Spare parts> Fuel sytem
Navigation

Fuel sytem

The complete offer in Fuel sytem

Sealing for transmitter fuel gauge

Rubber seal for the sensor of the fuel gauge as an single part.
Fit to all vehicle models: Trabant 601, Trabant 1.1, Wartburg 353, Wartburg 1.3, Brakas B1000, Barkas B1000-1, Multicar.
  • material: fuel resistant rubber, colour: black
  • made in Germany
  • one piece will be needed
4,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7461
Mechanical fuel pumps for the 1.3 engine

Fuel pump * PIERBURG *

Machanical fuel pump as complete unit. Fit for 4-stroke four cylinder motor Wartburg 1,3, Trabant 1,1 and Barkas B1000-1
High quality fabricator: Pierburg
  • delivery without mounting bits
  • inclusive O-sealing
  • one piece will be needed
125,11 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6328

Fuel pump *1,1-W1,3-B1000-1*

Mechanical petrol pump complete to transer the petrol from the tank into the carburettor.
Fit for all 4 stroke models like Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
  • one piece will be needed
  • made in EU
48,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 754

Between pluger

Crinded and hardened bolt used at between pluger. Connection between engine block and fuel pump. Fit for Trabant 1,1 and Wartburg 1,3 four stroke motors.
  • material: steel, annealed
  • one piece will be needed
51,08 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6713

Sealing ring for fuel pump

Sealing for connection between engine block and fuel pump. Fit for Trabant 1,1 and Wartburg 1,3 four stroke motors.
  • material: rubber, black
  • one piece will be needed
1,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7222

Membrane for fuel pump ( 5 hole system )

22,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 755

Membrane for fuel pump ( 6 hole system )

22,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 756

Carburettor membrane square W1,3 / T1,1 / B1000-1

Singel part of the square carburettor membrane.
Membrane inserts for the carburettor type:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1
OE Nummer: 1611757005 / 1352940230067816
24,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8627

Carburettor membrane small W1,3 / T1,1 / B1000-1

Singel part of the small carburettor membrane.
Membrane inserts for the carburettor type:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1
OE Nummer: 1611757005 / 1352940230067816
24,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8628

Sealing set carburettor

One set of sealings for repairing of the carburettor Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
Fit for the carburettor types:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1

Kit contens of paper sealings:

Kit contens of rubber O-sealings:

Kit contens of aluminium sealings:
28,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7415

Sealing carburettor (side)

Paper sealing as an single part
6,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8254

Sealing carburettor (rectangle)

Paper sealing as an single part
3,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8255

Sealing carburettor case

Paper sealing as an single part
4,69 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7560

Self-repair-set carburettor

Set to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 und Barkas B1000-1.
fit to the carb typs:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1
152,11 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 746

O-ring 18mm for carburettor

Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1

  • diameter: 18mm
  • material: high temperature and fuel resistant rubber, black
  • one piece will be needed
3,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8237

O-ring 2,9mm for carburettor

Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1

  • diameter: 2,90mm
  • material: high temperature and fuel resistant rubber, black
  • two piece will be needed
2,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8240

O-ring 29,5mm for carburettor

Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1

  • diameter: 29,50mm
  • material: high temperature and fuel resistant rubber, black
  • one piece will be needed
2,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8236

O-ring 5,28mm for carburettor

Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1

  • diameter: 5,28mm
  • material: high temperature and fuel resistant rubber, black
  • one piece will be needed
2,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8239

O-ring 9,25mm for carburettor

Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1

  • diameter: 9,25mm
  • material: high temperature and fuel resistant rubber, black
  • one piece will be needed
2,58 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8238

O-ring 80mm for carburettor

Special sealing ring as round packing cord as single part.
This 0-ring rubber is petrol and temperature resistant.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1

  • diameter: 80mm
  • material: high temperature and fuel resistant rubber, black
  • one piece will be needed
3,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8235

Nozzle self-repair-set carburettor W1,3 and B1000-1

Self repairset of nozzles for refresh the Wartburg 1.3 und Barkas B1000-1 carburettor.
Fit to the carburettort type:
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
43,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7749

Between flange

Rubber-metal sealing between sucition pipe and carburettor.
With the four pre installed bolts, the sealing will be mounted on top of the suction pipe.
  • fit for Trabant 1.1, Wartburg 1.3 and Barkas B1000-1
  • one piece will be needed
74,12 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6127
Fuel pressure pipe Wartburg 1.3

Fuel pipe 8mm, copper pipe

Copper tube to use as fuel pipe to connect the fuel tank and the fuel pump. (suction line)
  • material: copper tube
  • size: 8x1
  • length: 5 meter
  • one piece will be needed
Preis pro Meter: 10,91 Euro
54,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 726

Polyamid fuel pipe 8 x 1, price per meter

Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:8 mm
inner diameter:6 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price 4,80 Euro / meter
4,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6033

Polyamid fuel line 8 x 1

Fuel line 8 x 1 mm
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:8 mm
inner diameter:6 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price per meter: 3,80 Euro
19,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6032

Reinforcement bushing for fuel pipe 8 x 1

reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.: 6032 and 6033)
material: brass

It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations: see details
0,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6305
Rear flow pipe fuel pump Wartburg 1.3

fuel pipe-return, 6mm, copper pipe

Copper tube to use as fuel pipe to connect the fuel pump and the fuel tank. (return flow line)
  • material: copper tube
  • size: 6x1
  • length: 5 meter
  • one piece will be needed
price per meter: 7,96 Euro
39,79 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 727

Polyamid fuel pipe 6 x 1, price per meter

Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:6 mm
inner diameter:4 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
Bitte beachten: abgelängte Ware auf Kundenwunsch, keine Rücknahme oder Umtausch!
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7513

Polyamid fuel line 6 x 1

Fuel line 6 x 1 mm, most vehicles used as rear flow pipe for the petrol pump.
material: polyamide
PA 12 HIPHL-sw according to DIN 73378 and DIN 74324
soft, heat aging and light stabilized
outer diameter:6 mm
inner diameter:4 mm
wall thickness:1 mm

price is for one meter (max. 20 meter in one piece)

special advantages:
Minimal flow resistance through smooth inner walls, mechanical resistance against abrasion, impackt shock and oscilations, small bending radius, easy installation, minimal weight, no anti-corrosive necessary.
price per meter: 3,20 Euro
16,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7514

Reinforcement bushing for fuel pipe6 x 1

reinforcement bushing for our polyamide fuel pipe 8 x 1 (Art.No.: 7513 and 7514)
material: brass

It should be uesed for every connection between polyamid fuel pipe and fuel hose!
mor informations: see details
0,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7515

Fuel tank plug, lookable

Fuel plug complete delivered with keys for looking.
25,51 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6238

Aluminium fuel tank plug, lookable

Bayonett fuel tank plug with look and two keys.
Best replacement like the original one. Made in Germany.
Please check before order if your car got an bayonet or threat fuel pipe !
22,87 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8549

Bayonet fuel tank plug, lookable

Fuel tank plug with look and key.
produced by Hella
made in Germany
18,98 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3545
Texture-fuel hose 6mm and clamps

Fuel hose, 5,5 mm with texture

Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 5,5mm
  • material: petrol resistant rubber with outside texture
  • made in Germany
priece per Meter: 5,14 Euro
5,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 728

Hose clip for fuel hose 5,5 mm with texture

Clamp for flexible fuel hose (5,5mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 11mm
  • wide: 9mm
  • re-usable
1,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6197

Hose clip for fuel hose, 8 mm with texture

Clamp fpr flexible fuel hose (5,5mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 12 mm
  • wide: 8,5mm
  • re-usable
1,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6203

Hose clip 7 - 11 / 5 stainless steel

Hose clips made of stainless steel, for fuel hoses from diameter 7mm up to 11mm.
The wide of the clip is 5mm.
2,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6035
Texture-fuel hose 8mm and clamps

Fuel hose, 8 mm (insde diameter)

Flexible fuel hose with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 8 mm
  • material: petrol resistant rubber with outside texture
  • made in Germany
priece per Meter: 6,22 Euro
6,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 729

Hose clip for fuel hose, 8 mm with texture

Clamp fpr flexible fuel hose (8mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 13mm
  • wide: 9mm
  • re-usable
1,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8159

Hose clip for fuel hose, 8 mm with texture

Clamp fpr flexible fuel hose (8mm inside diameter) with outside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 13 mm
  • wide: 9,5mm
  • re-usable
1,35 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8160
Rubber fuel hose 6mm and clamps

Rubber Fuel hose, 6 mm

Flexible fuel hose with inside texture and rubber surface.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 5,5 mm
  • material: petrol resistant rubber with inside texture
  • made in Germany
priece per meter: 4,93 Euro
4,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7113

Hose clip for fuel hose 6 mm with rubber surface

Clamp fpr flexible fuel hose (6mm inside diameter) with inside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 12mm
  • wide: 9mm
  • re-usable
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8162

Hose clip for fuel hose, 6 mm with rubber surface

Clamp fpr flexible fuel hose (6mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 12 mm
  • wide: 8,5mm
  • re-usable
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8161
Rubber fuel hose 7,5mm and clamps

Rubber Fuel hose, 7,5 mm

Flexible fuel hose with inside texture and rubber surface. Inside diameter 7,5mm.
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part without mounting bits.
The price is for each 1m lenght.
If you order for example 3x 1m so you will get one piece with 3m length and so on.
  • inside diameter: 7,5 mm
  • material: petrol resistant rubber with inside texture
  • made in Germany
price per meter: 5,10 Euro
5,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6308

Hose clip for fuel hose 7,5 mm with rubber surface

Clamp fpr flexible fuel hose (7,5mm inside diameter) with inside texture. Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 14mm
  • wide: 9mm
  • re-usable
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8163

Hose clip for fuel hose, 7,5 mm with rubber surface

Clamp fpr flexible fuel hose (8mm inside diameter).
Best use for the fexible connection between fuel tank an carburettor or between metal / polyamid pipes and components like: tank, carburettor, fuel filter, fuel pump...
Delivery as single part.
Please note: in application with polyamid pipes you have to insert an metal bushing in advance!
  • max.diameter: 14 mm
  • wide: 8,5mm
  • re-usable
1,05 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8164

Petrol filter universal

Gasoline filter for the universal duty.
The filter will be mounted between the fuel line.
  • connection diameter: 6 and 8mm
  • material: petrol resistant plastic with parer filter
  • price per piece
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7224

Ring eye D12mm, connection 8mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 8mm
5,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7540

Ring eye D12mm, connection 6mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 6mm
4,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7539

Ring eye D10mm, connection 8mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 8mm
4,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7538

Ring eye D10mm with pipe bend

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 6mm
  • pipe bend: 90 degree
  • pipe length total: 55mm
14,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7516

Ring eye D10mm, connection 6mm hose

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 10mm
  • Eye diameter: 10mm
  • diameter pipe connection: 6mm
4,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7537

Ring eye D12mm with pipe bend

Ring terminal ideal for doing byself to fix fuel hoses.
Best use for many old- and Youngtimers to make fuel pessure pipes or normal pertol connection hoses.
Can be used for banjo screws D= 12mm
  • Eye diameter: 12mm
  • diameter pipe connection: 8mm
  • pipe bend: 90 degree
  • pipe length total: 74mm
15,38 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7517

Hose clip 8 - 12 / 7,5 stainless steel

Clip made of stainless steel for fuel hosed from diameter 8mm up to 12mm.
The wide of the clip is 7,5mm.
3,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6034

Hose clip 12 - 20 / 9

for fuel hose from D= 12mm up to 20mm.
the wide of the clip is 9mm.
1,30 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6036
1+2

Float needle valve W1,3 / T1,1 / B1000-1

Valve for controlling the petrol level for the carburettor type:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1
  • original spare part number: 135 29 40 230 078216
19,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 82

Set of carburettor membranes W1,3 / T1,1 / B1000-1

Membranes inserts for the carburettor type:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1
86,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7925

Vents hose-kit for fuel tank Wartburg

Complete kit for overhauling the vent hose at the Wartburg fuel system.
Fit to all Wartburg 353 and 1,3 models like Limousine and Tourist.
Lieferumfang:
  • 1m Petrol resistant PVC hose type: clear
  • 2x press clamps made of stainless steel Einohrschlauchklemme aus Edelstahl
  • 1x Rubber sealing for vent hose at the car body
9,13 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7880

Sealing for vents hose fuel tank

Rubber sealing mounted at the car body: rear right wheel case to the car boot at the Wartburg Limousine.
  • material: rubber, black
  • one piece will be needed
4,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7877

Vents hose for fuel tank, transparent

Petrol resistant PVC hose type: clear.
For the connection between fuel filling orifice and gas tank to vent the fuel system.
Fit to all Wartburg 353 and 1,3 models like Limousine and Tourist.
  • delivery as an single part
  • length: one meter
  • inside diameter: 12mm
  • outside diameter: 16mm
  • made in Germany
price 4,63 Euro / meter
4,63 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7879

Mounting clamp for vents hose for fuel tank

Press clamp for mounting the PVC hose type at the fuel tank connection and at the filling orifice to vent the fuel system.
Fit to all Wartburg 353 und 1,3.
  • delivery as an single part
  • material: stainless steel
  • two pieces will be needed
  • made in Germany
0,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7882

Vents hose for fuel tank, rubber

Petrol resistant rubber hose with texture for the connection between fuel filling orifice and gas tank to vent the fuel system.
  • price per meter
  • colour: black
  • material: fuel resistant rubber
  • inside diameter: 12mm
  • outside diameter: 18mm
  • Trabant 1.1, Wartburg 353 und Wartburg 1.3
price 7,32 Euro / meter
7,32 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7428

Retainer for metal pipe fuel tank

Steel stud for mountig the metal petrol pipe at the car body: rear right wheel case to the car boot at the Wartburg 353 and Wartburg 1,3 Limousine.
  • material: steel, galvaniced
  • delivery as single part, without mounting bits
  • one piece will be needed
28,56 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8632

Screw for Retainer metal pipe fuel tank

Single part of the screw for the stud. Mountig the metal petrol pipe at the car body: rear right wheel case to the car boot at the Wartburg 353 and Wartburg 1,3 Limousine.
  • material: stainless steel
  • delivery as single part
  • 2 piece will be needed
0,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8633

Washer for Screw retainer metal pipe fuel tank

Single part of the Washer for screw of the stud. Mountig the metal petrol pipe at the car body: rear right wheel case to the car boot at the Wartburg 353 and Wartburg 1,3 Limousine.
  • material: stainless steel
  • delivery as single part
  • 2 piece will be needed
0,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8634

Rubber seal for for fuel tank tube (upper side)

Petrol resistant rubber sealing for the fuel filling orifice tank flap - car boot.
Fit to all kind of Wartburg 353 and 1,3 Limousine, Tourist and Trans.
  • colour: black
  • material: fuel resistant rubber
  • inside diameter: 50mm
  • outside diameter: 61mm
  • Original spare part
24,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8390

Rubber seal for for fuel tank tube (lower side)

Petrol resistant rubber sealing for the fuel filling pipe car boot / car body.
Fit to all kind of Wartburg 353 and 1,3 Limousine.
  • colour: black
  • material: fuel resistant rubber
  • inside diameter: 50mm
  • outside diameter: 61mm
  • Original spare part
28,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8635

Fill hose for fuel tank, Tourist

Petrol resistant rubber hose for the connection between fuel filling orifice and gas tank to fill in the petrol.
Fit to all kind of Wartburg 353 and Wartburg 1,3 Tourist models.
  • colour: black
  • material: fuel resistant rubber
  • inside diameter: 50mm
  • outside diameter: 61mm
  • best quality, made in Germany
price 155,38 Euro / meter
12,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8152

Fill hose for fuel tank, Limousine W1,3

Petrol resistant rubber hose for the connection between fuel filling orifice and gas tank to fill in the petrol.
Fit to all kind of Wartburg 1,3 Limousine models.
  • colour: black
  • material: fuel resistant rubber
  • inside diameter: 50mm
  • outside diameter: 61mm
  • best quality, made in Germany
price 92,97 Euro / Meter
16,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8153

Clamp set for fill hose

Clamp set for petrol resistant rubber hose.
Fit to all kind of Wartburg 353 and Wartburg 1,3 Tourist models.
  • scope of delivery: 2 pieces
  • one set will be needed
5,78 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8583

fuel stabiliser, 250ml

for trouble free over-wintering of engines and fuel tanks.
The volume of the boddle protect 50 liter petrol.
priece per Liter: 59,72 Euro
14,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6671

Paper sealing for electrical mixture preheater

Upper paper seal for the electrical mixture preheater.
Fit to Trabant 1.1 and Wartburg 1.3
  • material: sealing paper
  • high quality reproduction
3,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7971

Sealing ring for electrical mixture preheater

Special sealing ring for the electrical mixture preheater.
Fit to Trabant 1.1 and Wartburg 1.3
  • material: sealing rubber
  • high quality reproduction
9,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7976

Electrical mixture preheater

electrical mixture preheater for Trabant 1.1 and Wartburg 1.3
96,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 801

Carburettor bowdencable

Bowdencable fir to all Wartburg 1,3
  • length total: 125 cm
  • length of the vover: 102,5cm
  • made in the EU
24,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3515

Tick-over valve

Control unit for handling the overrun cut-off at the four stroke engine.
Fit to the following vehicles with the carburettor types:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1
73,42 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 757

Aluminium-ring 12mm for carburettor

Special metal sealing sealing as single part.
This Aluring is extra made fur this carburettor umit.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1

  • outside diameter: 12mm
  • inside diameter: 7mm
  • thickness: 1mm
  • material: aluminium selaning
  • one piece will be needed
3,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8261

Aluminium-ring 10mm for carburettor

Special metal sealing sealing as single part.
This Aluring is extra made fur this carburettor umit.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1

  • outside diameter: 10mm
  • inside diameter: 6,8mm
  • thickness: 1,2mm
  • material: aluminium selaning
  • one piece will be needed
3,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8262

Aluminium-ring 13,8mm for carburettor

Special metal sealing sealing as single part.
This Aluring is extra made fur this carburettor umit.
Useable to refresh the carburettors of the Trabant 1.1, Wartburg 1.3 and Barkas B1000-1.
fit to the carb typs:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1

  • outside diameter: 13,8mm
  • inside diameter: 10,3mm
  • thickness: 1mm
  • material: aluminium selaning
  • one piece will be needed
3,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8263

Sealing ring for fuel tank plug

Special copper ring with mineral fibre to seal the drain plug at the petrol tank bottom side.
Fit to all kind of Wartburg Wartburg 311, 312, 313 Limousine, Cabrio, Camping, Coupe as well to Wartburg353 and 1,3 Limousine, Tourist and Trans.
  • material: copper
  • special pressing ring
  • only one time useable
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8173

Fuel tank plug, single Part

Screw for the Wartburg petrol tank, special made of stainless steel.
Fit to all kind of Wartburg Wartburg 311, 312, 313 Limousine, Cabrio, Camping, Coupe as well to Wartburg353 and 1,3 Limousine, Tourist and Trans.
  • material: stainless steel
  • made in Germany
  • Delivery without sealings and without the small drain plug
  • one piece will be needed
15,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8517

Fuel tank plug, set

Kit of screw (plug) for the Wartburg petrol tank.
The special screw is made of stainless steel.
Fit to all kind of Wartburg Wartburg 311, 312, 313 Limousine, Cabrio, Camping, Coupe as well to Wartburg353 and 1,3 Limousine, Tourist and Trans.
  • made in Germany
  • Scope of delivery: 1x special fuel tank plug, 2x sealings (copper), 1x small drain plug (stainless steel)
  • one set will be needed
17,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8518

Spring for tank plate

Torsion spring for hinged plate, fit to Wartburg 353 and Wartburg 1,3.
Will be mounted on the tank plate and car body.
The spring supports the closing of the hinged plate.
  • material: steel
  • surface: galvaniced
  • one piece will be needed
  • delivery as an single part
Original spare part number: 1342921001296301
8,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8548

Float for transmitter fuel gauge

Plastic float for the sensor of the fuel gauge as an single part.
Fit to all vehicle models: Trabant 601, Trabant 1.1, Wartburg 353, Wartburg 1.3, Brakas B1000, Barkas B1000-1, Multicar.
  • material: fuel resistant plastic, colour: withe
  • made in Germany
  • one piece will be needed
25,90 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7460

Transmitter for fuel gauge

Sensor for fuel gauge with potentiometer for connection to all offert fuel gauges.
Mounting place: on top / inside of the fuel tank.
Complete with rubber sealing and float. Fit to Wartburg 353 and Wartburg 1,3.
  • additional switch for reserve control lamp (GR)
  • made in Germany
  • one piece will be needed
57,43 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6690

Petrol filter 42mm, universal

Gasoline filter for the universal duty.
The filter will be mounted between the fuel line.
  • connection diameter: 6 and 8mm
  • material: petrol resistant plastic with parer filter
  • price per piece
3,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8642

Gas separator

Gas separator between fuel pump and Carbrettor.
Fit for Trabant 1,1 and Wartburg 1,3 and Barkas B1000-1 four stroke motors.
  • material: rubber, black
  • one piece will be needed
12,91 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8656
The complete offer in Fuel sytem

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas