Electrical system

Category Electrical system has the subcategory

The product category Wartburg 1.3 > Spare parts > Electrical system is spread over 9 sites:

Roller bearing 6303 ZZ

Single row roller bearing 6303, ZZ, 17x47x14.
High Qualit made by FAG.
Fit to AC generator 12V Trabant, LDM-part-no.: 760 and AC generator 12V Trabant 1.1, Wartburg 1,3 and Barkas B1000-1 LDM-part-no.: 762 rotor shaft front side (end shild)

ZZ- synonym for bearing cover, both side
dimensions: d=17mm, D=47mm, widness=14mm
bearing play CN(CO)-normale bearing play
one piece will be needed
made by FAG

9,79 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6333

Roller bearing 6003 ZZ

Detail

Single row roller bearing 6003, ZZ, 17x35x10.
Made by FAG.
Fit to AC generator 12V Trabant, Wartburg und Barkasrotor shaft front side

ZZ- synonym for bearing cover, both side
bearing play CN(CO)-normale bearing play
one piece will be needed
made by FAG

8,57 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6330

windscreen washer kit

Detail

Complete kit for windscreen washer system with electrical pump and water bottle
voltage: 12V
Scope of delivery:

bottle 1,5 liter
cap
metal holder
wash pump 12V
1m plastic hose (connection pump-spray jet
1 piece of two double jet washer inclusive retainer spring

fit to follow washer systems:
windscreen Trabant 601
Wartburg 353 and 1.3 Tourist rear window

56,53 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6907

Water vessel for windscreen washer system, singel part Detail Water bottle for windscreen washer system, to use in tandem with electrical pump bottle Volume: 1,5 liter original spare part fit to follow washer systems: windscreen Trabant 601 Wartburg 353 and 1.3 TOURIST rear window single part without pump, cap and metal holder
parts-no. 136 65 730	33,80 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6908

Pessure spring carbon brush Detail Coil spring for the carbon brushes at the rotary current generator. Original spare part (NOS) For each generator two pieces will be needed. Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1
Original spare part number: 8042.1-040	1,55 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 760

Graphite collector ring rotary current generator

Detail

Collector ring for the generator rotor.
Inclusive metal plates for mounting the rotor windings
Original spare part (NOS)

For each generator one piece will be needed
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1

Original spare part number: 8042.1-032/1

96,18 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7599

Bearing cover rotary current generator

Detail

Metal cover for the rear ball bearing (rotor shaft rear 6303ZZ) of the rotary current generator to the collector ring.
Original spare part (NOS)

metal, galvaniced
For each generator one piece will be needed
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1

Original spare part number: 8042.1-030

3,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 772

Bolt for regulator

Detail

Mounting bolt for regulator and cutout relay.
Original spare part (NOS)

threed: M5
length: 49mm
delivery inclusive nut SW8
For each generator tow pieces will be needed
Fit to all generators 12V Trabant 601, Trabant1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 und B1000-1

Original spare part number: 8042.401-000

2,45 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7600

Rubber membrane plug for holes with diameter of 15mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 15 mm
inner diameter of membrane (max. usable diameter): 9 mm
outer diameter (total): 20 mm

0,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6796

Rubber membrane plug for holes with diameter of 18,5mm

Detail

Membrane plug made of black rubber to shut round holes in car bodys (such as service holes) or as variable cable grommet seal for some wires (also with plugs)

fit to hole diameter of 18,5 mm (0,728")
inner diameter of membrane (max. usable diameter): 11 mm (0,433")
outer diameter (total): 23 mm (0,906")

0,97 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6895

The product category Wartburg 1.3 > Spare parts > Electrical system is spread over 9 sites:

1 2 3 4 5 6 7 8 9
Show all products

* All prices inclusive VAT and plus shipping costs.