This site in german: IFA-Fahrzeuge 
You are here: > IFA-vehicles

IFA-vehicles

Category IFA-vehicles has the following subcategorys:

The product category IFA-vehicles is spread over 7 sites:

Bleeder screw for frontwheel brake cylinder S4000 and W50

Bleeder screw for the front brake cylinders of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
  • thread: M8x1,25
  • spanner gap: SW9
  • total length: 32,5 mm
  • thread length: 12 mm
  • length of the spanner gap: 4,6 mm
  • one piece will be needed for each wheel brake cylinder
2,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7635

Fornt wheel brake cylinder S4000 and W50

Wheel brake cylinder overhauled for the front axle of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
The german overhauling at the wheel brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out brake cylinder in advance to our company.
  • cylinder bore: 38 mm
  • delivery complete with cap sleeves and dust sealings
  • case mark: FZ 25R
  • overhauled in Germany
49,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7638

Fornt wheel brake cylinder rear axle Robur

Wheel brake cylinder overhauled for the rear axle of the truck Robur LO and LD.
The german overhauling at the wheel brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out brake cylinder in advance to our company.
  • cylinder bore: 38 mm
  • delivery complete with cap sleeves and dust sealings
  • case mark:
  • overhauled in Germany
52,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8084

Bleeder screw for rear wheel brake cylinder S4000, W50 and Robur

Bleeder screw for the rear brake cylinders of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50 and Robour LO and LD.
  • thread: M8x1,25
  • spanner gap: SW9
  • total length: 49 mm
  • thread length: 15 mm
  • length of the spanner gap: 7,6 mm
  • one piece will be needed for each wheel brake cylinder
3,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7634

Sealing kit for front wheel brake cylinder S4000 and W50

Rubber sleeve kit for the wheel brake cylinder for truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
Reproduction at the original company and original tools.
Best quality made in Germany
Comlete set for one wheel brake cylinder (incl. 2 pieces dust cap and two pieces cap sleeve).
  • clinder diameter: 31,8 mm
  • material: rubber, black
  • one set will be be needed for each wheel brake cylinder
  • made in Germany
19,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7828

Sleeve for rear wheel brake cylinder S4000 and W50

Cap sealing for the rear axle wheel brake cylinder of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
  • clinder diameter: 38 mm (1" 1/4)
  • thickness: 8mm
  • two pieces will be needed for each wheel brake cylinder
  • made in Germany
6,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7636

Dust sealing for rear wheel brake cylinder S4000 and W50

Dust sleeve for the rear wheel brake cylinder of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
Reproduction by the original company and original tools.
  • clinder diameter: 38 mm
  • material: rubber, black
  • two pieces will be needed for each wheel brake cylinder
  • made in Germany
8,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7827

Ring sleeve master brake cylinder, W50

Ring sleeve for the master brake cylinder of the lorry IFA W50.
  • scope of delivery: 1 piece
  • four pieces will be needed for one brake master cylinder
  • piston diameter: 38 mm
  • made in Germany

6,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7230

Master brake cylinder W50, old version

Complete overhauled two circle master brake cylinder inklusive sleeves and brake fluid tanks for the lorry IFA W50.
Type: old version (complete bore diameter: 38mm)
The german overhauling at the master brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out masterbrake cylinder in advance to our company.
  • piston diameter: 38 mm
  • case type: WJ 15a or WJ 85
  • overhauled in Germany
129,30 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7640
The product category IFA-vehicles is spread over 7 sites:
1234567
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2020 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas