This site in german: Barkas B 1000 > Ersatzteile > Motor > Vergaser & Ansaug-System 
You are here: > Barkas B 1000> Spare parts> Engine> carburettor & air intake
Navigation

carburettor & air intake

The product category Barkas B 1000 > Spare parts > Engine > carburettor & air intake is spread over 5 sites:

12345
Show all products

Sealing set Carburettor BVF 40F

Paper sealing kit for carburettor type BVF 40F, Wartburg 353 and Barkas B1000 and some boat engines with this carburettor type.
Best use to refresh the carburettor. All parts are made from the orignial patterns and our own quality grade.
Set consist of:

  • one set will be needed
  • material: sealing paper, Vulkanfieber, fuel resistant rubber
  • high quality made in Germany
20,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8305

Carburettor idler air jet BVF 40F (M6-150)

Nozzle as idling air jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet inside of the Carburettor case. For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • Jet size: 150
  • Jet thread: M6
  • delivery as single part
4,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8405

Carburettor main jet BVF 40F (M5-125)

Nozzle as main jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet inside of the Carburettor case (float chamber). For dismounting and mounting is is necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • Jet size: 125
  • Jet thread: M5
  • delivery as single part
3,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8406

Carburettor idler jet BVF 40F (M5-75)

New produced Nozzle, made in Germany !
Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 75
  • Jet thread: M5
  • delivery as single part
5,62 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8407

Carburettor idler jet BVF 40F (M5-80)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 80
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8408

Carburettor idler jet BVF 40F (M5-85)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 85
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8409

Carburettor idler jet BVF 40F (M5-90)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 90
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8410

Hose kit for carburettor 40 F

Connection hose for the idle system of the carburettor type BVF 40F called Berliner Carburettor
Fit to Wartburg 353, B1000.
  • Delivery inclusive two hose clamps
  • Made in Germany
  • one kit will be needed
5,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8419

Screw carburettor jet sprayer

Mounting bolt as single part for installing the jet sprayer at the carburettor case.
Useable for the carburettor types: BVF 40F 2-11 of the car Wartburg 353 and carburettor types: BVF 40F 2-11 of the car Barkas B1000.
  • material: steel
  • one piece will be needed
1,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8449
The product category Barkas B 1000 > Spare parts > Engine > carburettor & air intake is spread over 5 sites:
12345
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas