This site in german: Barkas B 1000 > Ersatzteile > Motor > Kupplung 
You are here: > Barkas B 1000> Spare parts> Engine> clutch

spare parts for cluch Barkas B1000 and B1000-1

The product category Barkas B 1000 > Spare parts > Engine > clutch is spread over 5 sites:

clutch spare parts for Barkas B1000 (2-stroke) and B1000-1 (4-stroke)

Information about the deposit:

The clutch and clutch disc are to exchange for the old one, to enable the overhauling. There are two possibilties to get these clutch parts.
(1) The old cluch and/or clutch disc (worned out) are to ship to us before we ship the new one (after an acknowledged order).
(2) You have to pay additional money (deposit for old clutch + clutch disc) in your invoice. After you shipped back these parts to us, the money will be transfered back to your account. Please put a slip of paper with your customer no., invoice no. and your (international) bank account details or better your email address of PayPal account on it into the parcel (Or tell us this informations by email). You have to pay the shipping costs for yourself.

Info:

Particularly if clutch and release bearing were not exchanged during the last changes of clutch disc it is recommend to change all three components of clutch system. The reliabilty will be higher and additional wasteful reparations are not necessary.
As a general rule it is recommend to change the clutch and release bearing, too if clutch disc is changed.
The compressive force of disk spring of clutch will be lower in process of time. The disk spring can broke easier.
The main unit of release bearing is the ball bearing. This part wears out too especially if sealing of the bearing is damaged. So the clutch dust can invade and the bearing wears out faster.

spare parts for clutch of two stroke engine and with diameter of 200mm

Clutch set B1000, D=200mm ( two stroke )

Complete clutch set with diameter of clutch disc of 200 mm.
It fit to Barkas B1000 2-stroke engine (vintage of vehicle: from 03/1985 onwards).
contens:

Please note:

We can only exchange you this spare part set, if you ship 1x clutch B1000 D=200mm and one clutch disc B1000 D=200mm to our company in advance!
from vintage 03/1985 onwardsOverhauled in GermanyDelivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
298,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6316

Clutch from 03/1985, D=200mm ( two stroke )

Clutch for Barkas B1000 two stroke engine from year 3/1985,

Please note:

We can only exchange you this spare part, if you ship 1x clutch B1000 D=200mm to our company in advance!
Overhauled in GermanyDelivery only in exchange! Please send in advance one brake cylinder original IFA to our company
203,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4431

Clutch disk D=200mm (two stroke) Made in Germany

clutch disk for Barkas B1000 2-stroke engine
  • diameter 200 mmm
  • for vehicles with vintage from 03/1985 onwards
  • one piece will be needed
  • Made in Germany

fit to Slip ring disengager, Cluch

Please note:

We can only exchange you this spare part, if you ship 1x clutch disc B1000 D=200mm to our company in advance!
Overhauled in GermanyDelivery only in exchange! Please send in advance one brake cylinder original IFA to our company
140,70 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4433

Friction surface for clutch disc D200mm, original

Set of two pieces friction surfaces for clutches 200mm diameter.
Best for self made at the worn out clutch disc.
Fit for for Barkas B1000 two stroke(vintage up to 02/1985) and Barkas B1000-1 four stroke.
  • size: 200x135x3,5mm
  • not pree drilled
  • made in germany
Made in Germany
39,67 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7673

Friction surface for clutch disc D200mm, Valeo

Set of two pieces friction surfaces for clutches 200mm diameter.
Spare part for the clutch disc made by Valeo.
Best for self made at the worn out clutch disc.
Fit for for Barkas B1000 two stroke(vintage up to 02/1985) and Barkas B1000-1 four stroke.
  • size: 200x137x3,2mm
  • complete pree drilled
  • made in germany
Made in Germany
39,67 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7674

Clutch disk D=200mm (two stroke) Made in EU

clutch disk for Barkas B1000 2-stroke engine
  • diameter 200 mmm
  • for vehicles with vintage from 03/1985 onwards
  • one piece will be needed

fit to Slip ring disengager, Cluch
Made in EU
85,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6595

spare parts for clutch of two stroke engine and with diameter of 180mm

Clutch set D=200mm ( two stroke )

Complete clutch set with diameter of clutch disc of 200 mm.
It fit to Barkas B1000 2-stroke engine (vintage of vehicle: from 03/1985 onwards).
contens:

For more informations to this exchange part please use the Detail button.
from vintage 03/1985 onwardsDelivery only in exchange! Please send in advance one brake cylinder original IFA to our company.Overhauled in Germany
266,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6593

Clutch for B1000 up to 02/1985

Clutch for Barkas B1000 models up to year February 1985.
  • fit to clutch disc diameter 180mm, our order no. 3100)
  • with additional thrust bearing for old version of release bearing
  • one piece will be needed
Overhauled in GermanyDelivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
165,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6594

Clutch disk (W353/B1000/M24), Made in Germany

clutch disc with springs

fit for all variants of Wartburg 353, for Barkas B1000 (vintage up to 02/1985) and also for Multicar M24
diameter: 180 mm
Please note:

Exchange part

Delivery only in exchange, you have to ship one overhaulable clutch disk in advance !
Overhauled in GermanyDelivery only in exchange, you have to ship one overhaulable clutch disk in advance !
135,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3100

Friction surface for clutch disc (W353/B1000/M24)

Set of two pieces friction surfaces for clutches 180mm diameter.
Best for self made at the worn out clutch disc.
Fit for all variants of Wartburg 353 (without vintage limit), for Barkas B1000 (vintage up to 02/1985) and also for Multicar M24
  • size: 180x124x3,5mm
  • complete pree drilled
  • made in germany
Made in Germany
30,27 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7672

The product category Barkas B 1000 > Spare parts > Engine > clutch is spread over 5 sites:
12345
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2020 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Pocket Bikes