This site in german: Barkas B 1000 > Ersatzteile > Motor > Kupplung 
You are here: > Barkas B 1000> Spare parts> Engine> clutch

spare parts for cluch Barkas B1000 and B1000-1

The product category Barkas B 1000 > Spare parts > Engine > clutch is spread over 5 sites:

Clutch release bearing W353 up to 6/85; B1000 up to 02/1985

Clutch release bearing for cluch fit to the following car:
  • Wartburg 353, up to year 06/1985
  • Barkas B1000, up to 02/1985 (in tandem with clutch disc with diameter of 180 mm)
Special offer normaly 34,13 € now 25,58 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3104

Spring for clutch release bearing up to 6/85

Snap clamp for mounting the pressure bearing at the release shaft.
Type: old version of pressure bearing.
This part is an new reproduction made in Germany. Best replacement for the original ones.
Clip is made of spring steel.
Two pieces will be needed.
Surcace: blank.
Fit to the following car types:
  • Wartburg 353 up to 6-1985 Limousine and Tourist
  • Barkas B1000 up tp 3-85 with clutch D=180mm
  • Multicar M22
  • two pieces will be needed
Special offer normaly 2,99 € now 2,19 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7956

Spring for clutch release bearing from 6/85

Snap clamp for mounting the pressure bearing at the release shaft.
Fir to the following car types:
Wartburg 353 ab 6-1985 Limousine and Tourist
Trabant 1,1 without vintage limit Kombi and Limousine
Wartburg 1,3 without vintage limit Tourist and Limousine
Barkas B1000 ab 3-85 with clutch D=200mm
Barkas B1000-1 without vintage limit
2,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7328

Rivet set for clutch facing ( 12 pices )

Tubular rivet for cluch facing. Like the original ones made of steel.
Fit to the clutch linings of:
  • Trabant 601 D=160mm old- (fixede) and late- (tongued) clutch disc
  • Trabant1.1 clutch disc
  • Wartburg 353 D=180mm clutch disc
  • Barkas B1000 D=180mm and 200mm clutch disc
  • Wartburg 1.3 clutch disc
  • Barkas B1000-1 clutch disc

  • ideal for self repair
  • scope of delivery 12 pieces
  • material: steel
  • made in Germany
3,64 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 664

Clutch set ( 4 stroke )

Complete clutch set
Clutch set fit to Barkas B1000-1 with 4-stroke engine.
Diameter of this clutch is also 200mm, but it is NOT the same like the 2-stroke type.
contens:

For more informations to this exchange part please use the Detail button.
Overhauled in Germanyno exchenge part requestet!
440,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6317

Cluch ( 4 stroke )

Exchange spare part cluch for Barkas B1000 4-stroke engine
fit to cluch disk 4-stroke engine
{[Fit to clutch disc (four stroke)][one piece will be needed]}
For more informations to this exchange part please use the Detail button.
Refreshed in GermanyDelivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
225,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 4430

Cluch disk B1000-1

cluch disk for Barkas B1000-1 with 4-stroke engine

For more informations to this exchange part please use the Detail button.
Overhauled in GermanyDelivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
145,18 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4432

Slip ring disengager (4-stroke)

slip ring disengager fit for follow vehicles:
  • Trabant 1.1: all models
  • Wartburg 1.3: all models
  • B1000 (2-stroke): from 03/1985 onwards
  • B1000-1 (4-stroke): all models
34,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 680

Retainer spring for clutch cable

Retainer wire to fic the clutch cable at the vehicle frame or holder.
Can be used for Fahrzeuge: Wartburg 311,312, 313, Wartburg 353 and 1.3 and Barkas B1000 und B1000-1.
High quality reproduction.
  • material: spring steel
  • one piece will be needed
3,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8313

Clutch cable complete, original

Clutch cable for the Barkas B1000. Fit to all two stroke models with mechanical cable clutch system.
  • total length 930 mm
  • one piece will be needed
  • original spare part
121,24 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 8069

The product category Barkas B 1000 > Spare parts > Engine > clutch is spread over 5 sites:
12345
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Pocket Bikes