This site in german: Barkas B 1000 > Ersatzteile > Motor > Vergaser & Ansaug-System 
You are here: > Barkas B 1000> Spare parts> Engine> carburettor & air intake

carburettor & air intake

The product category Barkas B 1000 > Spare parts > Engine > carburettor & air intake is spread over 5 sites:

Rubber seal for flange throttle valve (carburettor 40 F)

Rubber sealing for flange throttle valve of old type of carburettor of Wartburg 353 and B1000, called BVF 40 F.
High quality made in Germay. Made of fuel resistant rubber.
  • one pieces needed for one carburettor
  • mounted between flange throttle valve (carburettor 40 F) and carburettor case
  • fit for Wartburg 353 und B1000
  • thickness: 1mm
4,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6486

Seal for flange suction pipe - engine block

Paper seal for flange of the inlet manifold of the carburettor type BVF 40 F, Jijkov and 36F. Mounted:
  • between flange inlet manifold and engine mount
  • one pieces needed
  • fit for Wartburg 353, B1000 and Wartburg 312
7,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6897

O-ring-sealing for mixture screw BVF 40F

Rubber O-ring sealing for the small mixture screw of the carburettor type BVF 40F 2-11 und 40F 1-12.
  • fit for the vehicles Wartburg 353 and Barkas B1000
  • material: spezial heat and fuel restistant rubber
  • one piece will be needed
0,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8301

Sealing ring carburettor slide jet 8 x 11 x 1,0

Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor and the cover of the main jet.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettor types: BVF 40F 2-11 of the car Wartburg 353 and carburettor types: BVF 40F 2-11 of the car Barkas B1000.
size:
  • inside diameter: 8,2mm
  • outside diameter: 11mm
  • thickness: 1,0mm
  • two pieces will be needed
1,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8300

fiber-sealing ring for needle valve

fiber sealing ring for float needle valve, fit to Trabant, Wartburg, Barkas, ZW1103.
data:
  • material: fiber sheated plastic
  • size: 10mm x 14mm x 1,0mm
  • one piece will be needed
0,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6540

Float needle valve, complete

The needle velve controls the volume of the float housing.
  • material: brass
  • nozzle: 18
  • typ: tongued
  • fit to all Wartburg 353 and Barkas B1000 carburettor typs (only fit to type 40F and not to Jijkov
  • one piece will be needed
15,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6541

Tick-over valve

Control unit for handling the overrun cut-off at the four stroke engine.
Fit to the following vehicles with the carburettor types:
  • 32F 1-1 Trabant 1.1
  • 34 TLA 51/2 Wartburg 1,3
  • 34F 1-3 Barkas 1000-1
73,42 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 757

Nozzle self-repair-set carburettor W1,3 and B1000-1

Self repairset of nozzles for refresh the Wartburg 1.3 und Barkas B1000-1 carburettor.
Fit to the carburettort type:
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1
43,14 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7749

Sealing carburettor jet sprayer

Special made paper sealing as single part for sealing the jet sprayer cannel at the carburettor case and sprayer.
This sealings are made for the exact fitting and sealing of this components.
Useable for the carburettor types: BVF 40F 2-11 of the car Wartburg 353 and carburettor types: BVF 40F 2-11 of the car Barkas B1000.
  • material: sealing paper
  • made in Germany
  • one piece will be needed
2,20 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8304
The product category Barkas B 1000 > Spare parts > Engine > carburettor & air intake is spread over 5 sites:
12345
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas