carburettor & air intake

The complete offer in carburettor & air intake

Air filter

Detail

fit for the vehicles Trabant 1.1, Wartburg 1.3 and B1000-1 (alle with 4-stroke engines)

material: paper ribs, vulcanized rubber lips
Made in Germany from the original equipment manufacturer

8,71 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1101

Air filter

Detail

air filter fit to all Wartburg and Barkas with two stroke motor.
no specification or manufacturing year limit.
made in Germany

one piece will be needed

12,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3175

Air filter

Detail

air filter fit to all Wartburg and Barkas with two stroke motor.
no specification or manufacturing year limit.
made in Germany

one piece will be needed
with expanded metal as cover (no paperboard with holes) for better air flow

10,40 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7229

1+1

intake silencer

Detail

air filter box for Wartburg 1.3

maybe also for the vehicles Trabant 1.1 and B1000-1 (alle with 4-stroke engines)

original-IFA-spare part

160,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6432

rubber diffusor for cold air intake Detail rubber diffusor tube for Air-Control-box of cold-/ warm air intake of Trabant 1.1 maybe also for the vehicles Wartburg 1.3 and B1000-1 (alle with 4-stroke engines)
original-IFA-spare part	18,21 €inclusive VAT, plus shipping costs temporary not available Art.No. 6665

float gauge for carburettor (old type) 40 F

Detail

carburettor float gauge for old type of carburettor of Wartburg 353, B1000 and Robur (LO) called 40 F
Reproduction made in EU

29,56 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6517

float gauge for carburettor (new type) Jijkov

Detail

carburettor float gauge for carburettor of Wartburg 353, B1000 called Jijkov

made of plastic

only few pieces available (originale spare part)

56,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6622

Self-repair-set carburettor 40F

Detail

6-part jet set for the carburettor BVF 40F of Wartburg 353, B1000.
Called Berliner-carburettor 40F
Delivery inclusive gauge needle valve and Mixture screw BVF 40F.

Material: brass / rubber
one set will be needed
made in Germany / EU

19,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6985

Self-repair-set carburettor Jijkov

Detail

10-part jet set for the carburettor of Wartburg 353, B1000 called Jijkov
delivery inclusive gauge needle valve

38,24 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6984

Carburettor Barkas B1000

Detail

Complete overhauled Carburettor for the three cylinder two stroke Wartburg engine with 1000 ccm
cylinder capacity. delivery without intake pipe.
Carburettor type: 40F 1-12

complete overhauled
high quality from Germany

Please note, we can only repair this spare part if you ship 1x carburettor BVF 40 1- to our company in advance!

Please send in advance one brake cylinder original IFA to our company.

280,00 €inclusive VAT, plus shipping costs

Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7032

Choke bowden cable Barkas B1000

Detail

Choke bowden wire for the Barkas B1000 two stroke.
Made in EU.

total length: 1720mm
length wire hull: 1650mm

33,32 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6866

Seal for carburettor case (old type) 40 F Detail Simple paper sealing with small divergences at the accuracy of fit. Cheaper product, made in Europe. seal for housing of old type of carburettor of Wartburg 353 and B1000, called 40-F
2,90 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 6478

Seal for carburettor case 40 F, made in Germany Detail Sealing for the both housings (float case) of old type of carburettor type BVF 40F. This sealing is made in Germany of special fuel resistant sealing paper. The holes and sizes are exactly and conforms to the original spare part. Fit to the Berliner carburettors for Wartburg 353 (40F 2-11) and Barkas B1000 40F 1-12.
8,95 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7799

Paper seal for flange throttle valve (carburettor 40 F)

Detail

Sealing for flange throttle valve of old type of carburettor of Wartburg 353 and B1000, called BVF 40 F.
High quality made in Germay. Made of fuel resistant sealing paper.

two pieces needed for one carburettor
mounted between flange throttle valve (carburettor 40 F) and cover of carburettor (drainer)
between cover of carburettor (drainer) and intake manifold
fit for Wartburg 353 und B1000

3,74 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6485

Rubber seal for flange throttle valve (carburettor 40 F)

Detail

Rubber sealing for flange throttle valve of old type of carburettor of Wartburg 353 and B1000, called BVF 40 F.
High quality made in Germay. Made of fuel resistant rubber.

one pieces needed for one carburettor
mounted between flange throttle valve (carburettor 40 F) and carburettor case
fit for Wartburg 353 und B1000
thickness: 1mm

4,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6486

Seal for flange suction pipe - engine block

Detail

Paper seal for flange of the inlet manifold of the carburettor type BVF 40 F, Jijkov and 36F. Mounted:

between flange inlet manifold and engine mount
one pieces needed
fit for Wartburg 353, B1000 and Wartburg 312

7,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6897

O-ring-sealing for mixture screw BVF 40F

Detail

Rubber O-ring sealing for the small mixture screw of the carburettor type BVF 40F 2-11 und 40F 1-12.

fit for the vehicles Wartburg 353 and Barkas B1000
material: spezial heat and fuel restistant rubber
one piece will be needed

0,89 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8301

Sealing ring carburettor slide jet 8 x 11 x 1,0

Detail

Special made fiber sealing as single part for sealing the brass air adjustment slide jet to the carburettor and the cover of the main jet.
This sealing rings are made for the exact fitting and sealing of this components.
Useable for the carburettor types: BVF 40F 2-11 of the car Wartburg 353 and carburettor types: BVF 40F 2-11 of the car Barkas B1000.
size:

inside diameter: 8,2mm
outside diameter: 11mm
thickness: 1,0mm
two pieces will be needed

1,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8300

fiber-sealing ring for needle valve

Detail

fiber sealing ring for float needle valve, fit to Trabant, Wartburg, Barkas, ZW1103.
data:

material: fiber sheated plastic
size: 10mm x 14mm x 1,0mm
one piece will be needed

0,35 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6540

Float needle valve, complete

Detail

The needle velve controls the volume of the float housing.

material: brass
nozzle: 18
typ: tongued
fit to all Wartburg 353 and Barkas B1000 carburettor typs (only fit to type 40F and not to Jijkov
one piece will be needed

15,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6541

Tick-over valve

Detail

Control unit for handling the overrun cut-off at the four stroke engine.
Fit to the following vehicles with the carburettor types:

32F 1-1 Trabant 1.1
34 TLA 51/2 Wartburg 1,3
34F 1-3 Barkas 1000-1

73,42 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 757

Nozzle self-repair-set carburettor W1,3 and B1000-1 Detail Self repairset of nozzles for refresh the Wartburg 1.3 und Barkas B1000-1 carburettor. Fit to the carburettort type: 34 TLA 51/2 Wartburg 1,3 34F 1-3 Barkas 1000-1
43,14 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7749

Sealing carburettor jet sprayer

Detail

Special made paper sealing as single part for sealing the jet sprayer cannel at the carburettor case and sprayer.
This sealings are made for the exact fitting and sealing of this components.
Useable for the carburettor types: BVF 40F 2-11 of the car Wartburg 353 and carburettor types: BVF 40F 2-11 of the car Barkas B1000.

material: sealing paper
made in Germany
one piece will be needed

2,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8304

Sealing set Carburettor BVF 40F

Detail

Paper sealing kit for carburettor type BVF 40F, Wartburg 353 and Barkas B1000 and some boat engines with this carburettor type.
Best use to refresh the carburettor. All parts are made from the orignial patterns and our own quality grade.
Set consist of:

one set will be needed
material: sealing paper, Vulkanfieber, fuel resistant rubber
high quality made in Germany

20,75 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8305

Carburettor idler air jet BVF 40F (M6-150)

Detail

Nozzle as idling air jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet inside of the Carburettor case. For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail

Jet size: 150
Jet thread: M6
delivery as single part

4,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8405

Carburettor main jet BVF 40F (M5-125)

Detail

Nozzle as main jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet inside of the Carburettor case (float chamber). For dismounting and mounting is is necessitating to split the carurettor case.
Exact mounting place: please click on Detail

Jet size: 125
Jet thread: M5
delivery as single part

3,59 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8406

Carburettor idler jet BVF 40F (M5-75)

Detail

New produced Nozzle, made in Germany !
Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail

Jet size: 75
Jet thread: M5
delivery as single part

5,62 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8407

Carburettor idler jet BVF 40F (M5-80)

Detail

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail

Jet size: 80
Jet thread: M5
delivery as single part

3,75 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8408

Carburettor idler jet BVF 40F (M5-85)

Detail

Jet size: 85
Jet thread: M5
delivery as single part

3,75 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8409

Carburettor idler jet BVF 40F (M5-90)

Detail

Jet size: 90
Jet thread: M5
delivery as single part

3,75 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8410

Hose kit for carburettor 40 F

Detail

Connection hose for the idle system of the carburettor type BVF 40F called Berliner Carburettor
Fit to Wartburg 353, B1000.

Delivery inclusive two hose clamps
Made in Germany
one kit will be needed

5,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8419

Screw carburettor jet sprayer

Detail

Mounting bolt as single part for installing the jet sprayer at the carburettor case.
Useable for the carburettor types: BVF 40F 2-11 of the car Wartburg 353 and carburettor types: BVF 40F 2-11 of the car Barkas B1000.

material: steel
one piece will be needed

1,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8449

Spring accelerator pump for carburettor (old type) 40 F

Detail

Pessure spring for the aditional accelerator pump of the carburettor type BVF 40F. Fit for Wartburg 353 and B1000.
For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail

Reproduction made in Germany
surface: galvaniced
one piece will be needed

3,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8468

Nozzle holder carburettor slide jet

Detail

Nozzle retainer for the slide jet carburettor.
This part ist new producted in Germany (exact fitting).
Useable for the carburettor types: BVF 40F 2-11 of the car Wartburg 353 and carburettor types: BVF 40F 2-11 of the car Barkas B1000.

delivery as single part
material: brass
made in Germany
one piece will be needed

9,84 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8536

Sealing plug for carburettor slide jet

Detail

New producted sealing screw as single part for sealing the slide jet at the carburettor.
Useable for the carburettor types: BVF 40F 2-11 of the car Wartburg 353 and carburettor types: BVF 40F 2-11 of the car Barkas B1000.

material: steel
surface: galvaniced
spanner gap: SW11
made in Germany
1 or 2 pieces will be needed, depends on the carburettor type

5,21 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8537