This site in german: Wartburg 1.3 > Ersatzteile > Motor > Kühlsystem 
You are here: > Wartburg 1.3> Spare parts> Engine> cooling system
Navigation

Water cooling system Wartburg 1,3

The product category Wartburg 1.3 > Spare parts > Engine > cooling system is spread over 4 sites:

1234
Show all products

Thermo switch for radiator fan

The thermo switch for radiator fan is a make contact, which is screwed directly into the radiator.
  • It closes contact if temperature of coolant is about 95°C +/- 3K and it closes if temperature is about 89°C +/- 3K.
  • fit for Trabant 1,1 and Wartburg 1,3
  • one piece will be needed
20,28 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 723

Bottle for coolant (W1.3/B1000-1)

Cooling water compensating reservoir fit to Wartburg 1.3 and Barkas B1000-1 (both types with 4-stroke engine).
The bolltels will be reproducted in EU at the genuine tool.
This compensating tank got two hose connections.
1x bottom connector with diameter: 15mm
1x upper connector (ventilation to radiator) with diameter: ca.10mm
Delivery as single part, without cap, ventil and mounting bits.
52,47 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6419

closure for compensating tank

Cap with core thread for coolant fluid bottle of Trabant 1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 and B1000-1, Multicar M24 and M25 with Cunewald engine.
  • delivery as an single part
  • material:plastic
  • new repoduction
  • one piece will be needed
8,82 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6645

blow off valve for compensating reservoir, 130kPa (W1.3/B1000-1)

Pressure valve for cooling water reservoir of Wartburg 1.3 and 4-stroke version of Barkas (B1000-1).
{[pressure: 130kPa][to mount inside the reservoir cap][one piece will be needed]}
Made in EU
24,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 618

Sealing compensating reservoir / blow off valve

Special sealing ring between the blow off valve and coolant compensating reservoir.
This part is an new production made of ur own manufactured tool.
  • material: heater fluid,Glysantin restistant rubber
  • delivery as single part, without any mounting parts
  • one piece will be needed

This sealing fit to coolant reservoir (W353/B1000/M25) and coolant reservoir
as well for
an dem blow off valve 50kPa, blow off valve 100kPa and blow off valve 130kPa
This sealing is suitable for follow car types:
  • Trabant 1.1
  • Wartburg 353
  • Wartburg 1.3
  • B1000 and B1000-1
  • Multicar M25

Suitable accessory:
5,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8474

tap for radiator

Roller valve to adjust the hot water for the passenger heating system at the heat exchanger.
49,88 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3530

Radiator hose set W1,3

Complete set oft coolant hoses to for the Wartburg 1.3
Fit to all types like Limousine, Tourist and Trans.
Scope of delivery:
  • 1x radiator hose: Di=10mm, length: 810mm
  • 1x radiator hose: Di=15mm, length: 470mm
  • 1x radiator hose: Di=15mm, length: 570mm
  • 1x radiator hose: Di=15mm, length: 760mm
  • 1x radiator form hose: Di=12mm, length: 360mm
  • 1x radiator form hose: Di=12mm, length: 420mm
  • 1x radiator form hose: Di=18mm, length: 240mm
  • 1x radiator form hose: Di=18mm, length: 260mm
  • 1x radiator form hose: Di=18mm, length: 300mm
  • 1x radiator form hose: Di=30mm, length: 240mm
  • 1x radiator form hose: Di=30mm, length: 470mm
  • 1x radiator form hose: Di=30mm, length: 480mm
99,48 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7969

Coolant hose, 15 x 3,5mm (yard goods)

rubber coolant hose with textile inset (DIN 73411 7/79)
  • up to 6 bar
  • Inner diameter: 15 mm (0,59 inch)
  • Thickness of wall: 3,5 mm (0,138 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Deliverable as yard goods. If order two pieces of this article we will deliver one piece with a length of two Meter.
price 17,92 Euro / meter
17,92 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6936

Coolant hose, 25 x 4,5mm (1 Meter)

Rubber coolant hose with textile inset (DIN 73411 7/79)
  • bup to 6 bar
  • Inner diameter: 25 mm (1 inch)
  • Thickness of wall: 4,5 mm (0,177 inch)
  • up to 125°C
  • Outer layer (EPDM): resistance to oil, ozone and aging through heat
  • Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of one Meter.
price 29,86 Euro / meter
29,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6917
The product category Wartburg 1.3 > Spare parts > Engine > cooling system is spread over 4 sites:
1234
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Kinderspielzeug