Water cooling system Wartburg 1,3

The complete offer in Water cooling system Wartburg 1,3

Water pump

Detail

Coolant pump inclusive sealing ring for four cylinder 4-stroke engines of follow vehicles:

Trabant 1.1
Wartburg 1.3
Barkas B1000-1
fit also to many Volkswagen with the engine block called 1100er
one piece will be needed

The water pump is the turing- and the tensioner pulley for the cam belt as well.

delivery inclusive sealing ring
best quality, made in Germany
one piece will be needed

59,21 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 716

Water pump kit

Detail

Set constists of 1x timing belt and 1x coolant pump inclusive sealing ring for four cylinder 4-stroke engines of follow vehicles:

Trabant 1.1
Wartburg 1.3
Barkas B1000-1
fit also to many Volkswagen with the engine block called 1100er
one piece will be needed

The water pump is the turing- and the tensioner pulley for the cam belt as well.

delivery inclusive sealing ring for water pump
best quality, made in Germany
one kit will be needed

78,33 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8599

Seal for water pump

Detail

Single part rubber seal fit to water pump.

2,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 717

Toothed belt 108 / 19,1

Detail

The toothed belt fit to Trabant 1,1 and Wartburg 1,3 and Barkas B1000-1 as well.
The timing belt will be delivered as an single part, without any mounting parts.

wide: 19,1mm (3/4 inch)
count of teeth: 108

17,97 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 1107

Seal for water pipe

Detail

Paper sealing for the cooling water pipe connection to the engine block, rear side water pump.
Fit ot Trabant 1.1, Wartburg 1.3 and Barkas B1000-1 with four stroke engines.

made in Germany

2,65 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 7483

Delivery only at advance payment.

Thermostat

Detail

These calorstat are fit for Trabant 1.1 and Wartburg 1.3.
Scope of delivery inclusive rubber sealing ring, which should be changed at every demounting of the thermal switches.

Reproduction in Germany
open up temperature: 84°C
basic diameter: 54 mm
valve diameter: 35 mm
length closed phase: 34mm
round sealing: 4x50x58
made in Germany
one piece will be needed

22,70 €inclusive VAT, plus shipping costs

Delivery in 5 days.

Art.No. 6418

Delivery only at advance payment.

Rubber seal for thermostat

Detail

O-ring seal for mechanical thermal switch. The seal should be changed after every demounting of the heat governor.

material: rubber
form: round
diameter: 4 mm x50 mm x 58 mm
one piece will be needed

1,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 722

Coolant GLYSANTIN® Protect Plus, frost protection agent

Detail

coolant concentrate Protect Plus (G48), suitable for all popular makes of car
quality engine coolant such as Glysantin® Protect Plus provides all-season:

Corrosion protection
Overheating protection
Frost protection
Neutrality to rubber and plastics
Low foaming tendency
High chemical stability

Fit to the most coolant systems, for instance of Wartburg 353 and 1.3, Trabant 1.1 and Barkas B1000(-1).

Mixable with coolant G11 from Volkswagen.
NOT mixable with coolant G12 from Volkswagen!

price 22,90 Euro / liter

22,90 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6716

Sealing ring for Thermostat housing

Detail

Rubber seal for the connection between thermostat case and engine block.
Fit to the cooling system of the Trabant 1.1, Wartburg 1.3 and B1000-1.

1,49 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7418

Delivery only at advance payment.

The thermostat case is the centrally part of cooling system.
Both cooling loops are connected in the thermostat housing.
Depending on the engine temperature the thermostat opens the large cooling loop (through the radiator).

original spare part

without cap

450,00 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6448

Repair set thermostat housing

Detail

Self repair set of pipes for the thermostat case of the Trabant 1,1 and Wartburg 1,3.
Set consist of:

2x tube with diameter 20mm
2x tube with diameter 16mm
1x tube with diameter 12mm

49,66 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 7452

Thermo switch

Detail

Thermostat is mounted in thermotat housing
The thermo switch is a earthless closed-circuit current switch for warm running automatic.
It open if cooling water temperature is about 60°C.

27,13 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 850

Transmitter for temperature indication

Detail

transmitter for temperature indication is screwed into thermostat housing

14,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 851

1+1

Sealing ring for cooling water pipe Detail Rubber seal for the connection between water pipe and engine block water pump. Fit to the cooling system of the Trabant 1.1, Wartburg 1.3 and B1000-1.
1,49 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 7419

Radiator

Detail

Water coolant radiatior for the Wartburg 1,3.

material: Aluminium
made in EU

normaly 129,00 € now 99,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3170

Thermo switch for radiator fan

Detail

The thermo switch for radiator fan is a make contact, which is screwed directly into the radiator.

It closes contact if temperature of coolant is about 95°C +/- 3K and it closes if temperature is about 89°C +/- 3K.
fit for Trabant 1,1 and Wartburg 1,3
one piece will be needed

20,28 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 723

Bottle for coolant (W1.3/B1000-1)

Detail

Cooling water compensating reservoir fit to Wartburg 1.3 and Barkas B1000-1 (both types with 4-stroke engine).
The bolltels will be reproducted in EU at the genuine tool.
This compensating tank got two hose connections.
1x bottom connector with diameter: 15mm
1x upper connector (ventilation to radiator) with diameter: ca.10mm
Delivery as single part, without cap, ventil and mounting bits.

52,47 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6419

closure for compensating tank

Detail

Cap with core thread for coolant fluid bottle of Trabant 1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 and B1000-1, Multicar M24 and M25 with Cunewald engine.

delivery as an single part
material:plastic
new repoduction
one piece will be needed

8,82 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6645

blow off valve for compensating reservoir, 130kPa (W1.3/B1000-1)

Detail

Pressure valve for cooling water reservoir of Wartburg 1.3 and 4-stroke version of Barkas (B1000-1).
{[pressure: 130kPa][to mount inside the reservoir cap][one piece will be needed]}

Made in EU

24,54 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 618

Sealing compensating reservoir / blow off valve

Detail

Special sealing ring between the blow off valve and coolant compensating reservoir.
This part is an new production made of ur own manufactured tool.

material: heater fluid,Glysantin restistant rubber
delivery as single part, without any mounting parts
one piece will be needed

This sealing fit to coolant reservoir (W353/B1000/M25) and coolant reservoir
as well for
an dem blow off valve 50kPa, blow off valve 100kPa and blow off valve 130kPa
This sealing is suitable for follow car types:

Trabant 1.1
Wartburg 353
Wartburg 1.3
B1000 and B1000-1
Multicar M25

Suitable accessory:

5,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8474

tap for radiator Detail Roller valve to adjust the hot water for the passenger heating system at the heat exchanger.
49,88 €inclusive VAT, plus shipping costs temporary not available Art.No. 3530

Radiator hose set W1,3

Detail

Complete set oft coolant hoses to for the Wartburg 1.3
Fit to all types like Limousine, Tourist and Trans.
Scope of delivery:

1x radiator hose: Di=10mm, length: 810mm
1x radiator hose: Di=15mm, length: 470mm
1x radiator hose: Di=15mm, length: 570mm
1x radiator hose: Di=15mm, length: 760mm
1x radiator form hose: Di=12mm, length: 360mm
1x radiator form hose: Di=12mm, length: 420mm
1x radiator form hose: Di=18mm, length: 240mm
1x radiator form hose: Di=18mm, length: 260mm
1x radiator form hose: Di=18mm, length: 300mm
1x radiator form hose: Di=30mm, length: 240mm
1x radiator form hose: Di=30mm, length: 470mm
1x radiator form hose: Di=30mm, length: 480mm

99,48 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7969

Coolant hose, 15 x 3,5mm (yard goods)

Detail

rubber coolant hose with textile inset (DIN 73411 7/79)

up to 6 bar
Inner diameter: 15 mm (0,59 inch)
Thickness of wall: 3,5 mm (0,138 inch)
up to 125°C
Outer layer (EPDM): resistance to oil, ozone and aging through heat
Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Deliverable as yard goods. If order two pieces of this article we will deliver one piece with a length of two Meter.

price 17,92 Euro / meter

17,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6936

Coolant hose, 25 x 4,5mm (1 Meter)

Detail

Rubber coolant hose with textile inset (DIN 73411 7/79)

bup to 6 bar
Inner diameter: 25 mm (1 inch)
Thickness of wall: 4,5 mm (0,177 inch)
up to 125°C
Outer layer (EPDM): resistance to oil, ozone and aging through heat
Inner layer (EPDM): resistance to antifreeze admixture and corrosion inhibitor

Only obtainable in pieces of one Meter.

price 29,86 Euro / meter

29,86 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6917

Coolant hose, 25 x 3,5mm (1 Meter)

Detail

rubber coolant hose with textile inset (DIN 73411 issue 1955)

working pressure: 3 bar
Inner diameter: 25 mm (1 inch)
Thickness of wall: 3,5 mm (0,138 inch)
Outer and inner layer made of black SBR-rubber quality
resistant against hot water with antifreeze admixture from -20°C up to +95°C

Only obtainable in pieces of one Meter.

Inexpensive alternative for coolant hose 25mm x 4,5mm with lower resistance against pressure and temperatureFit to many veteran cars, for instance Wartburg 311price 14,77 Euro / meter

14,77 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6948

1+1

Fan for radiator

Detail

electrical fan for radiator Trabant 1,1. complete with installing frame for radiator.
curency: 12V

made in Germany
one piece will be needed

77,77 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6483

compensating tank complete, universal

Detail

universal useable coolant bottle.
Scope of delivery complete with closure cap and integreated valve and switch for fluid lavel.
Two connections for the water hoses.
diamter connection down: 15mm
diamter connection on top: 8mm
Brillant replacement for the original spare part. Can be used for tuning and modificatios for example: Trabant with Wartburg engine or VW engines

41,98 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7430

Hose connector 19mm, universal

Detail

Universal useable plastic connection tube for coolant hoses.
Best use for reparations of demaged hoses or tuning and modifications z.B. Trabant with Wartburg engine or VW engines.
Easy to install, just push the two ends of the hoses at tube and fix it with two clamps.
technical details:

diameter: 19mm
lenght of the connection side: 32mm
legth total: 75mm
material: plastic, temperatur and oel restistant, whithe

3,18 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7432

Paper selaing for radiator switch

Detail

Special paper sealing ring for the electrical radiator fan
Fit to:
Thermo switch for Wartburg 353 form May 1985 (part.-no.:7286)
Thermo switch for Wartburg 1,3 and Trabant 1,1 (part.-no.:723)

material: special sealing paper
one piece will be needed

1,72 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8352

The complete offer in Water cooling system Wartburg 1,3

* All prices inclusive VAT and plus shipping costs.