Spare parts and accessories of the drive system

The product category Trabant 1.1 > Spare parts > Gearbox is spread over 4 sites:

Sleeves for the wheelside joint drive shaft

Sleeve rubber (outer tripode universal shaft side)

CV rubber sleeve for outer joint of universal shaft, constant velocity drive shaft for Trabant 601 from vinatge: april 1984 and Trabant 1,1 (without vintage delimitation).

material: Rubber, black
size: inner diameter hinge: 68 mm, inner diameter universal shaft: 18 mm, length 105 mm
made in EU
one piece will be needed for each drive shaft

12,80 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 652

Sleeve rubber EU ( constant velocity drive shaft )

Detail

CV rubber sleeve set for outer joint of universal shaft, constant velocity drive shaft for Trabant 601 from vinatge: april 1984 and Trabant 1,1 (without vintage delimitation).
Sleeve made in Europe
contents:

1x sleeve rubber (Art.-No.: 653)
1x band clamp set (Art.-No.: 6394)
1x high performance grease (Art.-No.: 6256)

19,24 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 6296

Sleeve rubber GKN ( constant velocity drive shaft )

Detail

1x sleeve rubber
1x high performance grease
1x band clamp big diamter
1x band clamp small diamter

25,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7512

Band clamp, short

Detail

Rebound strap for mounting of sleeve rubbers of universal shafts
long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 25mm up to 50mm
application:

the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
fixing this position by hooking into
spanning the band clamp with a pincers
ready

3,03 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6536

Rebound strap 4,6 X 360 mm

Detail

Strap for rubber sleeves.

material: stainless steel
made in Germany
4 pieces will be needed

2,48 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 655

Band clamp set for sleeve rubber of universal shaft

Detail

Rebound strap set for mounting of sleeve rubbers of universal shafts
consist of:

long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 40mm up to 110mm
short band clamp to seal sleeve rubber on universal shaft, for diameter from 25mm up to 50mm

application:

the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
fixing this position by hooking into
spanning the band clamp with a pincers
ready

5,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6394

Socked spring

Detail

Sleeve spring (round) have to be pressed in the support for engine or gerabox retainer.

outside diameter: 75mm
length: 55mm
length of the mounting bushing inside: 68mm
diameter of the mounting bushing inside: 11mm
Trabant 1,1 one piece will be needed for engine-gerbox support front left hand
Wartburg 1,3 two pieces will be needed for engine support front and for gearbox support rear

70,77 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 635

Socked spring - eccentric

Detail

Sleeve spring (round-eccentric) have to be pressed in the engine-gearbox support

Trabant 1,1 one piece will be needed for engine support rear

88,18 €inclusive VAT, plus shipping costs

temporary not available

Art.No. 636

Radial sealings gearbox (dirve shaft)

Oil seal gearbox casing - universal shaft left

Detail

Radial sealing with special oil return twist.
Please note: this seal can be only installed at the left hand (driver side)
Made for the Trabant 1.1 and Wartburg 1,3 gearbox.
Mounting place: differential gear - left hand universal shaft

seal with readvancing twist
type with additional dust lip
inside diameter: 40mm
outside diameter: 52mm
gauge: 7mm
left hand

10,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3153

Oil seal gearbox casing - universal shaft right

Detail

Radial sealing with special oil return twist.
Please note: this seal can be only installed at the right hand (codriver side)
Made for the Trabant 1.1 and Wartburg 1,3 gearbox.
Mounting place: differential gear - right hand universal shaft

seal with readvancing twist
type with additional dust lip
inside diameter: 40mm
outside diameter: 52mm
gauge: 7mm
right hand

10,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 3152

The product category Trabant 1.1 > Spare parts > Gearbox is spread over 4 sites:

1 2 3 4
Show all products

* All prices inclusive VAT and plus shipping costs.