Spare parts and accessories of the drive system

The product category Trabant 1.1 > Spare parts > Gearbox is spread over 4 sites:

Band clamp , long

Rebound strap for mounting of sleeve rubbers of universal shafts
long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 40mm up to 110mm
application:

the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
fixing this position by hooking into
spanning the band clamp with a pincers
ready

3,81 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6408

Front wall collar

Detail

Rubber sleeve to seal the hole of gear change rod to the bulkhead to the engine compartment.
Fit to all types of Trabant 1.1 and Wartburg 1.3

Material: rubber, black
reproducted part, EU

12,78 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 697

Bearing bush in gear change rod

Detail

Plastic bearing bush fit to gearbox side end of gear change rod.
The plastic bushing for gear change rod will be mounted at the ball stud for gear selector shaft LDM-part no.: 8214.

one piece will be needed for one gear change rod
fit to Trabant 1,1 and Wartburg 1,3
Part-No.: 03 16129 001

14,88 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7039

Ball stud for gear selector shaft

Detail

Ball stud as single part.
Fit to all gear selectors at the Trabant 1.1 and Wartburg 1.3
This ball stud will be mounted at the plastic bushing for gear change rod LDM-part no.: 7039.

one piece will be needed for one gear change rod
delivery inclusive mounting nut
fit to Trabant 1,1 and Wartburg 1,3
Part-No.: 99 00244 143

5,56 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8214

Ball stud as single part for the bell crank 1x top and 1x bottom side.
Can be used for the original plastic ball holder (LDM-part no.:7038)
Fit to all gear selectors at the Trabant 1.1 and Wartburg 1.3
This bearings will be mounted at the gear change rod LDM-part no.: 8216.

two piece will be needed
delivery inclusive mounting nut
fit to Trabant 1,1 and Wartburg 1,3
Part-No.:

5,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8231

Ball holder for preselective rod

Detail

Ball holder for both ends of preselective rod (connection between gearbox and gear change rod)

two pieces will be needed for one preselective bar
fit to Trabant1,1 and Wartburg 1,3
Part-No. (Wartburg): 53 01304 405

4,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7038

Ball bearing for bell crank

Detail

Bearing for the bell crank consist of ball stud and ball holder.
Reclacement made of metal for the original plastic ball holder (LDM-part no.:7038)
Fit to all gear selectors at the Trabant 1.1 and Wartburg 1.3
This bearings will be mounted at the gear change rod LDM-part no.: 8216.

two piece will be needed
delivery inclusive mounting nut
fit to Trabant 1,1 and Wartburg 1,3
Part-No.:

5,83 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8215

Ball bearing for bell crank

Detail

one piece will be needed
scope of delivery inclusive 2x joint
delivery inclusive 2x mounting nut
fit to Trabant 1,1 and Wartburg 1,3
Part-No.:

14,90 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8216

bearing for gear shifting, complete Detail
86,06 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 696

The product category Trabant 1.1 > Spare parts > Gearbox is spread over 4 sites:

1 2 3 4
Show all products

* All prices inclusive VAT and plus shipping costs.