This site in german: IFA-Fahrzeuge > Wartburg 311 / 312 / 313 > Stoßdämpfer / Achse 
You are here: > IFA-vehicles> Wartburg 311 / 312 / 313> Shock absorber / axle

Shock absorber / axle

The complete offer in Shock absorber / axle

Drive joint rubber W311

Drive joint instert made of rubber for the wheel drive shaft Wartburg 311.
Mounting place gearbox side. New reproduction.
  • delivery as an single part
  • outside diameter:125mm
  • inside diameter: 59mm
  • material: rubbber, black
  • made in Germany
  • four pieces will be needed
14,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7850

Ball joint for track rod 14mm, right hand (cone 16 mm) Germany

Ball joint with right turn thread for track rod and with 16mm-cone for Wartburg 311 and 313, Framo (Barkas V901).
Good replacment part for the original one.
This spare part is produced in Germany in high quality.
  • Cone: diameter from 14,5mm to 16mm, thread at the cone M12x1,5
  • thread steering rod side: M14x1,5 RIGHT turn, thread length: 60mm
  • Please note: every tie bare needs one ball joint with right turned thread and one ball joint with left turned thraead!
  • two pieces will be needed for reach car
  • made in Germany
39,02 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7857

Ball joint for track rod 14mm, left hand (cone 16 mm) Germany

Ball joint with left turn thread for track rod and with 16mm-cone for Wartburg 311 and 313, Framo (Barkas V901).
Good replacment part for the original one.
This spare part is produced in Germany in high quality.
  • Cone: diameter from 14,5mm to 16mm, thread at the cone M12x1,5
  • thread steering rod side: M14x1,5 LEFT turn, thread length: 60mm
  • Please note: every tie bare needs one ball joint with right turned thread and one ball joint with left turned thraead!
  • two pieces will be needed for reach car
  • made in Germany
39,02 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7858

Telescopic shock absorber, W311, front axle

Buffer for the Wartburg 311 front axle with leaf spring. Fit to both typs: Limousine and Tourist.
  • scope of delivery inclusive bushing
  • made in Germany
  • 2 pieces will be needed
64,26 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6575

Telescopic shock absorber, W311, rear axle

Buffer for the Wartburg 311 rear axle with leaf spring. Fit to both typs: Limousine and Tourist.
  • scope of delivery inclusive bushing
  • made in Germany
  • 2 pieces will be needed
64,26 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6574

Wheel bearing outer side, rear axle W311/ 313

Ball bearing type: 6306 C2 mounting place at for the inner side of rear axle.
Fit to Wartburg 311 and 313 typs: Limousine Tourist, Camping, Sport.
  • type: without cover
  • made in Germany
  • for each car rear axle 2 pieces will be needed
23,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7214

Wheel bearing outer side, rear axle W311/ 313

Wheel bearing type: 6205 C2 for the rear axle. The rear stub axle has got each side two wheel bearings. This type is used for the outher side.
Fit to Wartburg 311 and 313 typs: Limousine Tourist, Camping, Sport.
  • high quality made in Germany
  • dimensions: d=25mm, D=52mm, widness=15mm
  • bearing clearance: C2 (less bearing clearance for minimal noises)
  • 2 pieces will be needed
19,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7213

Wheel bearing outer side, front axle W311/ 313

Ball bearing type: 6306 C2 mounting place at for the inner and out side of front axle.
Fit to Wartburg 311 and 313 typs: Limousine Tourist, Camping, Sport.
  • type: without cover
  • made in Germany
  • for each car front axle 4 pieces will be needed
23,60 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7593

Radial sealing D62mm for W311/ 313, front axle

Rubber sealing for the wheel hub of the front axle.
Please note useable for front axle with outside diamter 62mm
Type like original with metal ring outside.
Fit to Wartburg 311 and 313 typs: Limousine Tourist, Camping, Sport.
  • material: NBR
  • made in Germany
  • 2 pieces will be needed
16,31 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7594

Radial sealing D72mm for W311/ 313, front axle

Rubber sealing for the wheel hub of the front axle.
Please note useable for front axle with outside diamter 72mm
Type like original with metal ring outside.
Fit to Wartburg 311 and 313 typs: Limousine Tourist, Camping, Sport.
  • material: NBR
  • made in Germany
  • 2 pieces will be needed
15,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8052

Radial sealing W311/ 313, rear axle

Rubber sealing for the wheel hub of the rear axle.
Type like original with metal ring outside.
Fit to Wartburg 311 and 313 typs: Limousine Tourist, Camping, Sport.
  • material: NBR
  • made in Germany
  • 2 pieces will be needed
14,32 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7215

Coil spring retainer for wishbone W353 /312

Lower suspension spring support for the front axle of the Wartburg 353 and 312.
The spring cup seat have to be mounted together with the shock absorber holder on top of the upper wishbone Wartburg 353 / 312. Fit at the front axle left and right hand.
  • delivery as an single part
  • surface: steel blank
  • for each car two pieces will be needed
  • good reporduction, made in Eu
46,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7659

Rubber sleeve cushion for shock absorber 30mm

The bushing is pressed in to the eye of the shock absorber diameter size 30mm.
Fit to Trabant 500,600,601 leaf spring shocks or Wartburg 311/312/353, DDR trailers shocks and so on...
  • 1x length inner sleeve: 32 mm
  • 1x rubber
  • made in Germany
  • 2 or 4 pieces will be needed
12,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8028

Bolt for wheel bearing housing

Screw for mounting the wheel bearing case at the steering front axle left or right hand
W312, 353, 1,3
Hexagon socket-head screw like original made with strength class 10.9
  • Hexagon bolt
  • strength grade 10.9
  • surface galvaniced
  • delivery as an single part
  • fit for the front axle of Wartburg 312, 353 and 1.3
  • 8 pieces will be needed
2,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8219

Bolt for wheel bearing housing rear axle

Screw for mounting the wheel bearing case at the rear axle left or right hand
W312, 353.
Hexagon socket-head screw like original made with strength class 10.9
  • Hexagon bolt
  • strength grade 10.9
  • surface galvaniced
  • delivery as an single part
  • fit for the rear axle of Wartburg 312 and 353
  • please note: fit not for the rear axle of the Wartburg 1,3
  • 8 pieces will be needed
2,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8220

Protaction cap for Steering rack (W311,312,313)

Dust sealing for the gear rack at the Wartburg 311, 312 and 313 steering case.
  • material: plasic, black
  • one pieces will be needed
23,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8413

Form ring 20mm for Spring, front axle

Rubber form ringfor the coil spring for the Wartburg 353 and 1,3 front axle (Wartburg 312).
This form ring is about 19-20mm thickness.
Plaese check at your Wartburg before, which ring is mounted!
Fit to both typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 19-20mm
  • made in Germany
  • 2 pieces will be needed
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8645

Form ring 25mm for Spring, front axle

Rubber form ringfor the coil spring for the Wartburg 353 and 1,3 front axle (Wartburg 312).
This form ring is about 25mm thickness.
Plaese check at your Wartburg before, which ring is mounted!
Fit to both typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 25mm
  • made in Germany
  • 2 pieces will be needed
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8647

Form ring 20mm for Spring, rear axle

Rubber form ringfor the coil spring for the Wartburg 353 and 1,3 rear axle (Wartburg 312).
This form ring is about 20mm thickness.
Plaese check at your Wartburg before, which ring is mounted!
Fit to both typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 20mm
  • made in Germany
  • 2 pieces will be needed
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8648

Form ring 25mm for Spring, reart axle

Rubber form ringfor the coil spring for the Wartburg 353 and 1,3 rear axle (Wartburg 312).
This form ring is about 25mm thickness.
Plaese check at your Wartburg before, which ring is mounted!
Fit to both typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 25mm
  • made in Germany
  • 2 pieces will be needed
24,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8649

Form ring 10mm for grinded Spring, front axle

Rubber form ringfor the grinded coil spring for the Wartburg 353 and 312.
This form ring is about 10mm thickness.
Plaese check at your Wartburg before, which ring / Spring type is mounted!
Fit to typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 10mm
  • made in Germany
  • 2 pieces will be needed
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8652

Form ring 17mm for grinded Spring, front axle

Rubber form ringfor the grinded coil spring for the Wartburg 353 and 312.
This form ring is about 17mm thickness.
Plaese check at your Wartburg before, which ring / Spring type is mounted!
Fit to typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 170mm
  • made in Germany
  • 2 pieces will be needed
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8653

Form ring 10mm for grinded Spring, rear axle

Rubber form ringfor the grinded coil spring for the Wartburg 353 and 312.
This form ring is about 10mm thickness.
Plaese check at your Wartburg before, which ring / Spring type is mounted!
Fit to typs: Limousine, Tourist and Trans.
  • material: rubber
  • Form ring total thickness: 10mm
  • made in Germany
  • 2 pieces will be needed
23,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8654
The complete offer in Shock absorber / axle

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas