Home
Impressum
Terms of business
Basket
You are here: >
IFA-vehicles
>
W50/L60
Shop
IFA engine
pistons
IFA-vehicles
Framo
Brake system
Fuel sytem
Suspension
P70 / F8 / F9
W50/L60
Trabant 500/600
brake system
Rubber sections & -parts
electrical system
Front axle
Wartburg 311 / 312 / 313
Brake system
Cooling system
Engine
Shock absorber / axle
Gearbox / Shifting
Rubber sealings
Multicar M22
Multicar M24
Axle
Brake system
Electrical system
Car body
Engine - Gear box
Multicar M25
Exhaust system
Axle
Brake system
Electrical system
Car body
Fuelsystem
Engine - Gear box
Clutch System
Gear shifting
Multicar M26
Brake system
Electrical system
Multicar M27
Engine
Trabant 601
Spare parts
Tuning parts
complete cars
Trabant 1.1
Spare parts
Tuning parts
Wartburg 353
Spare parts
Tuning parts
Wartburg 1.3
Spare parts
Tuning parts
Barkas B 1000
Spare parts
Ball joints, accessories
Boots for ball joints
Skoda
Trailer
Bastei-camper
Camptourist / Klappfix
Intercamp / Oase
Qek-camper
Special made
Bulbs
12Volt
6Volt
24 Volt
connecting wire and accessory
bicolored car wires
Single colour wire
manufactured wires
workshop requirement
hose clips
tools
Lubricants
Mounting parts
fuel tank coating
Protection equipment
Varnish and paint
Accessory
Corrosion protection
adhesive bonded joint
Bowden cable
Carburetor jets
care products
Antifriction bearing
Grooved ball bearing
Cylindrical roller bearing
oils
Special items
Service
privacy policy
Terms of business
Used Oil disposal
Taking back of batterys
Downloads
shipping costs
Favorite links
Impressum
Produktindex
Search
Basket
W50/L60
The complete offer in W50/L60
Switch for reverse speed L60
Detail
Reverse speed switch fir to the lorry L60.
thread: M14x1
switch is mechanical pressed
delivery inclusive nut
made in EU
Original spare part number: 7.6021
19,42 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8005
interior light W50
Detail
Passenger lamp fir to the lorry W50.
Delivery inclusive clear lens, bulb retainer and selaings.
Without bulbs.
New original spare part
Original spare part number: 8838.8/2
24,00 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7832
Cylinder base packing W50
Detail
Cylinder base sealing (paper) between cylinder block and crankcase.
Fit to the lorry W50 and tractor ZT300
Delivery as a single part without any mounting parts.
original spare part
two pieces will be needed
3,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8021
Oilsump Sealing W50
Detail
Paper gasket kit (consist of four pieces. Mounted between cylinder block and oilsump.
Fit to the lorry W50 and tractor ZT300
Delivery without any mounting parts.
original spare part
one pieces will be needed
9,90 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 8024
Cylinder head packing W50
Detail
Cylinder head sealing fit to the lorry W50.
Delivery as a single part without any mounting parts.
two pieces will be needed
17,76 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8004
Manifold packing W50
Detail
Sealing between the exhaust manifold and the Cylinder heads.
Fit to the lorry W50.
The exhaust sealing will be delivery as a single part without any mounting parts.
made of sealing paper with graphite surface
two pieces will be needed
2,99 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8019
Intake manifold packing W50
Detail
Sealing between the inlet manifold and the cylinder heads.
Fit to the lorry W50.
The induction manifold sealing will be delivery as a single part without any mounting parts.
made of sealing paper with graphite surface
two pieces will be needed
2,99 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8020
Rear wheel brake cylinder S4000 and W50
Detail
Wheel brake cylinder overhauled for the rear axle of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
The german overhauling at the wheel brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out brake cylinder in advance to our company.
cylinder bore: 31,8 mm
delivery complete with cap sleeves and dust sealings
case mark: FZ 5R
overhauled in Germany
88,95 €
inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.
Art.No. 7637
Bleeder screw for frontwheel brake cylinder S4000 and W50
Detail
Bleeder screw for the front brake cylinders of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
thread: M8x1,25
spanner gap: SW9
total length: 32,5 mm
thread length: 12 mm
length of the spanner gap: 4,6 mm
one piece will be needed for each wheel brake cylinder
2,60 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7635
Dust sealing for fornt wheel brake cylinder S4000, W50, Robour
Detail
Dust sleeve for the front wheel brake cylinder of the truck S4000, S4000-1 (successor of the truck Horch H3S), IFA W50 and Robour (Lo ans LD).
Reproduction by the original company and original tools.
clinder diameter: 31,8 mm (1" 1/4)
material: rubber, black
two pieces will be needed for each wheel brake cylinder
made in Germany
10,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7639
Cap sleeve for fornt wheel brake cylinder S4000, W50, Robur
Detail
Cap sealing for the front wheel brake cylinder of the truck S4000, S4000-1 (successor of the truck Horch H3S), IFA W50 and Robur (LO ans LD)
clinder diameter: 31,8 mm (1" 1/4)
thickness: 8mm
two pieces will be needed for each wheel brake cylinder
made in Germany
11,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7177
Sealing kit for front wheel brake cylinder S4000, W50 and Robur
Detail
Rubber sleeve kit for the wheel brake cylinder for truck S4000, S4000-1 (successor of the truck Horch H3S), IFA W50 and Robur (LO and LD)
Reproduction at the original company and original tools.
Best quality made in Germany
Comlete set for one wheel brake cylinder (incl. 2 pieces dust cap and two pieces cap sleeve).
clinder diameter: 31,8 mm
material: rubber, black
one set will be be needed for each wheel brake cylinder
made in Germany
29,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7829
Fornt wheel brake cylinder S4000 and W50
Detail
Wheel brake cylinder overhauled for the front axle of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
The german overhauling at the wheel brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out brake cylinder in advance to our company.
cylinder bore: 38 mm
delivery complete with cap sleeves and dust sealings
case mark: FZ 25R
overhauled in Germany
88,95 €
inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.
Art.No. 7638
Fornt wheel brake cylinder front axle Robur
Detail
Wheel brake cylinder overhauled for the front axle of the truck Robur LO and LD.
The german overhauling at the wheel brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out brake cylinder in advance to our company.
cylinder bore: 31,8 mm
delivery complete with cap sleeves and dust sealings
case mark: EZ 5R
overhauled in Germany
88,95 €
inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.
Art.No. 8085
Fornt wheel brake cylinder rear axle Robur
Detail
Wheel brake cylinder overhauled for the rear axle of the truck Robur LO and LD.
The german overhauling at the wheel brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out brake cylinder in advance to our company.
cylinder bore: 38 mm
delivery complete with cap sleeves and dust sealings
case mark:
overhauled in Germany
88,95 €
inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.
Art.No. 8084
Bleeder screw for rear wheel brake cylinder S4000, W50 and Robur
Detail
Bleeder screw for the rear brake cylinders of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50 and Robour LO and LD.
thread: M8x1,25
spanner gap: SW9
total length: 49 mm
thread length: 15 mm
length of the spanner gap: 7,6 mm
one piece will be needed for each wheel brake cylinder
4,80 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7634
Sleeve for rear wheel brake cylinder S4000 and W50
Detail
Cap sealing for the rear axle wheel brake cylinder of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
clinder diameter: 38 mm (1" 1/4)
thickness: 8mm
two pieces will be needed for each wheel brake cylinder
made in Germany
11,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7636
Dust sealing for rear wheel brake cylinder S4000 and W50
Detail
Dust sleeve for the rear wheel brake cylinder of the truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
Reproduction by the original company and original tools.
clinder diameter: 38 mm
material: rubber, black
two pieces will be needed for each wheel brake cylinder
made in Germany
12,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7827
Sealing kit for front wheel brake cylinder S4000 and W50
Detail
Rubber sleeve kit for the wheel brake cylinder for truck S4000, S4000-1 (successor of the truck Horch H3S) and IFA W50.
Reproduction at the original company and original tools.
Best quality made in Germany
Comlete set for one wheel brake cylinder (incl. 2 pieces dust cap and two pieces cap sleeve).
clinder diameter: 31,8 mm
material: rubber, black
one set will be be needed for each wheel brake cylinder
made in Germany
29,50 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7828
Ring sleeve master brake cylinder, W50
Detail
Ring sleeve for the master brake cylinder of the lorry IFA W50.
scope of delivery: 1 piece
four pieces will be needed for one brake master cylinder
piston diameter: 38 mm
made in Germany
26mm inner diameter
28mm inner diameter
11,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7230
Master brake cylinder W50, old version
Detail
Complete overhauled two circle master brake cylinder inklusive sleeves and brake fluid tanks for the lorry IFA W50.
Type: old version (complete bore diameter: 38mm)
The german overhauling at the master brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out masterbrake cylinder in advance to our company.
piston diameter: 38 mm
case type: WJ 15a or WJ 85
overhauled in Germany
129,30 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7640
Master brake cylinder W50, late version
Detail
Complete overhauled two circle master brake cylinder inklusive sleeves and brake fluid tanks for the lorry IFA W50.
Type: new version (complete bore diameter: 38mm)
The german overhauling at the master brake cylinders will be the best quality and equals to the first original production.
This spare part we can only delivered at direct exchange. You have to ship your worn out masterbrake cylinder in advance to our company.
piston diameter: 38 mm
case type: ZM 31R
overhauled in Germany
129,30 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 7656
Ring sleeve wheel brake cylinder
Detail
Ring sleeve for the wheel brake cylinder of the lorry Robur LO oder LD.
scope of delivery: 1 piece
piston diameter: 38 mm
made in Germany
11,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7234
Ring sleeve master brake cylinder, L60
Detail
Ring sleeve for the master brake cylinder of the lorry IFA L60.
scope of delivery: 1 piece
piston diameter: 45 mm
made in Germany
11,90 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7235
W50 hook for elastic band
Detail
special hook to use together with elastic string
fit to many trucks and trailers (W50/L60, ROBUR, Barkas B1000 and many more)
made of galvanised sheet metal
with two mounting holes (diameter: 5mm / well spacing: 34mm
1,91 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7317
Fuse box eigth fold
Detail
Fuse box inclusive 8 fuses. Wire connection with mounting screws.
Type with 8 single places for fuses.
Cover mede of clear glass plastic.
Useable for Ifa cars and many Old- and Youngtimers.
18,24 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 8036
Fuse box sixfold
Detail
Fuse box inclusive 6 fuses. Wire connection with mounting screws.
Type with 6 single places for fuses.
Cover mede of clear glass plastic.
Useable for Ifa cars and many Old- and Youngtimers.
19,54 €
inclusive VAT, plus shipping costs
temporary not available
Art.No. 8035
LED Headlamp insert
Detail
LED Headlight as an complete unit.
Best replacement for the H4 or R2 headlights. Brilliant light quality !!!
Fit to Trabant, Trabant 1.1, Baraks B1000, Barkas B1000-1, W50, Multicar, MZ motorbikes.
scope of delivery: inclusice LEDs
price per piece!
electrical power: 12V
585,44 €
inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.
Art.No. 8132
Spring for door look, front
Detail
Spring fpr the opening mechanism of the front door looks.
Delivery as an single part.
fit for all kind of Wartburg 353 and 1,3 (all models Limousine and Tourist), Barkas, Multicar M24 / M25 and W50.
mounting place: driver and codrivers door
made in Germany
two pieces will be needed
1,75 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8202
Fuse box SDB/8
Detail
Retainer for the fuses (8 pieces) as terminal block with clamp connection for the wires.
Fit to Trabant 601 Limousine, Universal and Kuebel.
original spare part
delivery complete cover
delivery without fuses
origial spare part no: 8811.11
36,44 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 7475
Switch for preheating and starter
Detail
Switch to preheat and start the diesel engine.
The swicht got three positions:
0= out of service
1= preheating and direct contact to the dip switch (2) for starter
2= dip switch starter
Fit for Multicar M22, M24, M25, W50, L60 and other IFA vehicles.
Delivery inclusive mounting nut.
Repro part made in EU.
delivery as an single part
material: steel, galvanived
without electrical mounting parts
diameter case: 70mm
Diameter mounting threat: 26mm
solid switch knob made of metal
30,46 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8381
Delivery only at advance payment.
Pessure switch for starter
Detail
Black push button for the starter motor.
Fit for Multicar M22, M24, M25, W50, L60 and other IFA vehicles.
Delivery inclusive mounting nut.
Repro part made in EU.
delivery as an single part
material: plasic, black
without electrical mounting parts
diameter push button: 17mm
Diameter mounting threat: 26mm
5,06 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8380
Main switch for battery
Detail
Main switch for interruption of the plus or minus wires form the battery.
Delivery inclusive removable key handle.
Fit for Multicar M22, M24, M25, W50, L60 and other IFA vehicles.
Repro part made in EU.
delivery as an single part
material: plasic, black
without electrical mounting parts
diameter: 80mm
Diameter mounting threat: 12mm
35,70 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8386
Sealing for Headlamp for IFA W50 / L60
Detail
Rubber ring for the headlamp of the IFA W50 / L60.
material: rubber, black
two pieces will be needed for each car
17,30 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8444
Outer door handle, left side, PVC black, complete with look and key (EU)
Detail
Reproduction door handle made of plastic for Multicar, Trabant, Wartburg, Barkas, W50.
colour: black
scope of delivery complete with lock and key
good quality made in EU
19,85 €
inclusive VAT, plus shipping costs
Delivery in 1-3 days
Art.No. 8631
The complete offer in W50/L60
* All prices inclusive VAT and plus
shipping costs
.
© 2003 - 2024 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas