This site in german: IFA-Fahrzeuge > P70 / F8 / F9 
You are here: > IFA-vehicles> P70 / F8 / F9

P70 / F8 / F9

The complete offer in P70 / F8 / F9

Piston P70, IFA F8

Piston set for the P70 and F8 consist of:
1x piston left hand
1x piston right hand
2x piston pin dimeter: 15mm
4x piston pin clips
  • piston number:76.001.1 (left) 76002.1 (right)
  • made in Germany
  • one kit will be needed
bore size:
350,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7348

Grooved ball bearing, 6305

One row grooved ball bearing 6305, bearing for P70 and F8 gearbox.
Type P70 with and without dry clutch.
  • two pieces will be needed
  • made in Germany
made in Germany
18,57 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7157

Grooved ball bearing, 6207

One row grooved ball bearing 6207, bearing for P70 and F8 gearbox.
Type P70 with and without dry clutch.
  • two pieces will be needed
  • made in Germany
made in Germany
28,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7156

Grooved ball bearing, 6206 C2

One row grooved ball bearing 6206 C2, bearing for P70 and F8 gearbox.
Type P70 with and without dry clutch.
  • one piece will be needed
  • made in Germany
made in Germany
8,84 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7155

Grooved ball bearing 16013 small

One row grooved ball bearing 16013, it fit in a gearbox from the P70.
The bearing can be only used at the latest model of P70 with dry clutch system.
  • mark: 16013
  • 1x groved ball bearings will be needed
  • widness: 11mm
14,45 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 7158

Radial sealing D75 x 35 x 10

Radial sealing for the P70 gearbox.
Outside with metal ring.
  • made in Germany
  • one piece will be needed
  • fit to gearbox of P70 with dry clutch system
24,89 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7161

Radial sealing D43 x 60 x 10

Radial sealing for the P70 and F8 gearbox.
  • made in Germany
  • two pieces will be needed
  • fit to gearbox of F8 and P70 with and without dry clutch system
8,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7159

Radial sealing D20 x 35 x 10

Radial sealing for the P70 and F8 gearbox.
  • made in Germany
  • one piece will be needed
  • fit to gearbox of F8 and P70 with and without dry clutch system
6,62 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7160

Radial sealing D42 x 58 x 9

Radial sealing for the P70 and F8 rear axle.
Outside with metal ring.
  • made in Germany
  • two pieces will be needed
10,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7162

Radial sealing D27 x 41 x 10

Radial sealing for the engine, crankshaft ignition side P70 and F8.
  • material: NBR
  • type with additional dust lip
  • one piece will be needed
5,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7999

Radial sealing D35 x 47 x 10

Radial sealing for the engine, crankshaft chain pulley side P70 and F8.
  • material: NBR
  • two pieces will be needed
5,33 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7998

Bulbs spare kit R2 / 6V

Spare kit with different bulbs fit to voltage of 12V
content:
  • 1x R2-lamp 45/40W with base P45t
  • 1x spherical lamps 18W white with base Ba15s
  • 1x tubular lamp 18W (C21W) with base SV 8,5
  • 1x tubular lamp 5W (C5W) with base SV 8,5
  • 1x bulb 4W (T4W) with base BA 9s
  • 1x bulb for speedometer 0,6W with base BA 7s
  • 1x spherical lamps 21W white with base Ba15s
  • 1x spherical lamps 5W white with base Ba15s
  • 1x Torpedo-fuse 8A
  • 1x Torpedo-fuse 16A
14,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7145

Ring sleeve, for wheel brake cylinder, front axle (IFA F9)

Ring sleeve kit for the front wheel brake cylinder for IFA F9
Reproduction at the original company and original tools.
Best quality made in Germany
Comlete set for one wheel brake cylinder (incl. 2 pieces)
  • fit to brake cylinder diameter 25mm
  • One set will be needed for each wheel brake cylinder
16,73 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6920

Protection cap for starter lite ( plastic )

Sealing cap to protect the starter wire (plus) against dust and moisture.
Fit to the vehicles: P70, Trabant, Wartburg, Multicar, Framo and Barkas.
  • made in Germany
  • one piece will be needed
3,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 786

Switch 6 / 12V

Universal useable switch.
Please choose
Can be used for many Old and Youngtimers.
  • original spare part
  • Original number: 8600.34
switch knop
17,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7451

Knob for push switch 6 / 12V

Button insert for the push switchs.
Colour: yellow
Can be used for many Old and Youngtimers.
  • original spare part
  • delivery as an single part with snap ring
Original spare part number: 8600.33-2
0,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7960

Wire set for switch for warning flasher 6V

Cable set for the 6V version of switch for warning flasher.
Fit to voltage of 6V.
Can be used for many Old and Youngtimers.
Best use for Trabant as connecton between flasher unit, fuse box and switch.
  • original spare part
  • length about:630mm
  • one set will be needed
9,85 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7441

Plug for body

Small plug for holes diameter 5mm.
Can be used for the car body.
  • material: rubber, black
  • total length: 27mm
  • made in Germany
2,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7705

Spring for idle screw, carburettor

Pressur spring for idle adjusting screw at the carburettor.
Fit for:
  • Straitdraft carburetor H 362- : Wartburg 311, 312 and 313
  • Straitdraft carburetor H 362- : Framo V901
  • Straitdraft carburetor H 362- : fire fighter pump TS8
  • Straitdraft carburetor : P70, F8
  • Downdraught carburettor BVF36F: Robur LO, Wartburg 353
  • Downdraught carburettor BVF40F: Wartburg 353, Barkas B1000
  • Block carburettor 28HB: Trabant 500,600 and 601

  • delivery as single part
  • surface: galvaniced
  • made in Germany
  • one piece will be needed
1,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8459
The complete offer in P70 / F8 / F9

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2020 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas