Engine - Gear box

The complete offer in Engine - Gear box

Petrol filter insert for M24 and M25

Detail

Fuel filter fit to all Multicar type M24 and M25 (with Cunewlad engine)

incl. sealing rings
made in Germany
one piece will be needed

11,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8008

Petrol filter for M24 and M25

Detail

Fuel filter fit to all Multicar type M24 and M25 (with Cunewlad engine)

incl. sealing rings
made in Germany
one piece will be needed

11,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8278

Oelfilter for M24 and M25

Detail

Oel filter fit to all Multicar type M24 and M25 (with Cunewlad engine)

incl. sealing ring
made in Germany
one piece will be needed
outside diameter: 93mm
thread: 3/4-16 UNF
length: 95mm

9,80 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8009

Coolant pump M25 Detail
41,89 €inclusive VAT, plus shipping costs temporary not available Art.No. 8393

Thermostat

Detail

Cooling water heat governor fit to all Multicar type M25

incl. sealing ring
Thermostat opens by 82°C
one piece will be needed

11,87 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7192

compensating reservoir (W353/B1000/M25)

Detail

Coolant compensating reservoir with one gland on bottom.

This coolant reservoir is suitable for follow car types:

Wartburg 353
B1000 (only 2-stroke)
Multicar M25

Suitable accessory:

48,20 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6728

Sealing compensating reservoir / blow off valve

Detail

Special sealing ring between the blow off valve and coolant compensating reservoir.
This part is an new production made of ur own manufactured tool.

material: heater fluid,Glysantin restistant rubber
delivery as single part, without any mounting parts
one piece will be needed

This sealing fit to coolant reservoir (W353/B1000/M25) and coolant reservoir
as well for
an dem blow off valve 50kPa, blow off valve 100kPa and blow off valve 130kPa
This sealing is suitable for follow car types:

Trabant 1.1
Wartburg 353
Wartburg 1.3
B1000 and B1000-1
Multicar M25

Suitable accessory:

5,95 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8474

blow off valve for compensating reservoir, 50kPa

Detail

Blow off valve for coolant compensating reservoir of the Multicar M24 and M25.
It will be mounted inside reservoir cap.

pressure: 50kPa
one piece will be needed
made in EU

20,53 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8480

closure for compensating tank

Detail

Cap with core thread for coolant fluid bottle of Trabant 1.1, Wartburg 353, Wartburg 1.3, Barkas B1000 and B1000-1, Multicar M24 and M25 with Cunewald engine.

delivery as an single part
material:plastic
new repoduction
one piece will be needed

8,82 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 6645

Sealing kit for engine M25 Detail Complete gasket set for the engine Multicar M25 Made in EU. One set will be needed.
20,82 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 8351

Exhaust seal M25

Detail

Sealing between the exhaust manifold and cyinderhead of the diesel engine of the Multicar M25.
Fit for cylinder (1-4)

delivery as single part
material: paper seal with dry graphite
4 pieces will be needed for each motor

1,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8395

Fuel pump for Multicar M25

Detail

Mechanical fuel pump for the engine of the Multicar type M25.

delivery as an complete unit, inclusive connection screws
made in EU
one piece will be needed

53,55 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7679

Filter cap for fuel pump

Detail

Plasic filter cap for mounting at the fuel pump (part.-no.:7679)
Fit for the engines of the Multicar type M25.

delivery as single part
made in EU
one piece will be needed

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8383

Insert for fuel pump

Detail

Plasic insert with filter metal for mounting inside of the fuel pump (part.-no.:7679)
Fit for the engines of the Multicar type M25.

delivery as single part
made in EU
one piece will be needed

2,50 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8382

Air filter M25

Detail

Coco nut filter fit Muticar M25
Best qualiy made in Europe.

inside diameter:8cm
outside diameter:22cm
length:10cm
Made in EU
one piece will be needed

12,85 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8370

Inlet valve M25

Detail

Inlet valve for the diesel engine of the Multicar M25

delivery as single part
Length: 138 mm
barrel diameter: about 8mm
valve plate diameter: 41mm
Four pieces will be needed total for each motor

8,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8377

Exhaust valve M25

Detail

Outlet valve for the diesel engine of the Multicar M25

delivery as single part
Length: 138 mm
barrel diameter: about 8mm
valve plate diameter: 33mm
Four pieces will be needed total for each motor

8,92 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8378

Push rod for valve timing M25

Detail

Tappet push for the inlet or outlet valve for the diesel engine of the Multicar M25.
With oel cannel. One end with conical seat and on the other side with tow ball.

delivery as single part
Length total: 20 cm
outside diameter: about 8mm
8 pieces will be needed total for each motor

16,66 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8496

Valve stem guide M25

Detail

Valve guide for the inlet or outlet valve for the diesel engine of the Multicar M25

delivery as single part
Length total: 50 mm
outside diameter: about 15mm
bore diameter: 8mm
8 pieces will be needed total for each motor

11,60 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8379

Injection nozzle M25

Detail

Diesel injector for the engine of the Multicar M25

delivery as single part
4 pieces will be needed total for each motor

19,04 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8384

Cylinder head packing 85mm M25 Detail
26,18 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 8391

Cylinder head packing 90mm M25/1 Detail
14,56 €inclusive VAT, plus shipping costs Delivery in 1-3 days Art.No. 8392

Starter for Multicar M25

Detail

Starter fit to the following cars: Multicar M25

power: 2,2kW (3,0 hp)
overhauled in Germany
your old starter have to be first shipped to our company for exchange

genuine part number: 8202.10/2

195,00 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 7218

Fuel pressure pipe set M25

Detail

One set of diesel pressure pipes from the fuel injection pump to the injector of each cylinder (1-4)
Fit for the diesel engine of the Multicar M25.

delivery as set
material: steel pipes (4 pieces)
inclusive cap nuts
One kit will be needed for each motor

38,56 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8394

Fuel hose 8x1000mm M25

Detail

Diesel hose with 2x connector eyelet for banjo screw.
Fit for the diesel engine of the Multicar M25.
Fuel resistant rubber hose with meatal sheathing.

delivery as single part without mounting bits
inside diameter: 8mm
length: 1m
One piece will be needed for each motor

12,44 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8396

Fuel hose 8x1250mm M25

Detail

Diesel hose with 1x connector eyelet for banjo screw and 1x coupling nut SW19
Fit for the diesel engine of the Multicar M25.
Fuel resistant rubber hose with meatal sheathing.

delivery as single part without mounting bits
inside diameter: 8mm
length: 1,25m
One piece will be needed for each motor

15,21 €inclusive VAT, plus shipping costs

Delivery in 1-3 days

Art.No. 8397