Open search

Front axle

The product category Barkas B 1000 > Spare parts > Front axle is spread over 6 sites:

Mounting bolt for bearing retainer

Hexagon screw for mounting the brubber bearing retainer at the vehicle frame.
Can be used for Barkas B1000 und B1000-1
Mounting place at the front and rear axle.
For the front axle will be four pieces needed as well for the rear axle.
Strength class: 10.9
spanner gap: SW19
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7610
Delivery only at advance payment.

Rubber bearing

Bearing for the wishbones of the Barkas B1000 and B1000-1.
The rubber will be installed at the wishbone and fixed by clamp at the car frame.
Please note: the rubber ring has an special form and assembly possition !
(click on details)
The bearing fits to the front and rear axle at all types and body variations of Barkas B1000 and B1000-1.
  • material: rubber, black
  • for the rear wishbones, two pieces will be needed
  • for the front wishbones, two pieces will be needed
  • made in Germany
  • please note the assembly-marks, see details
Reproduction made in Germany
29,11 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4540
Delivery only at advance payment.

Rubber for shock wishbone

Buffer for the wishbone end position for the front and rear axle of the Barkas B1000 and B100-1 all types and models.
This part is an brilliant German reproduction. The rubber part is at the sizes and rubbermaterial equivalent to the original part and and good replacement.
  • at the rear axle 8 pieces will be needed
  • at the front axle 8 pieces will be needed
  • made in Germany
Rubber part made of your own moulding tool, made in Germany
9,93 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6837
Delivery only at advance payment.

Sleeve rubber ( outer universal shaft side ), splited

Sleeve can be used for the models Barkas B1000 and B1000-1.
Fit to cars with douple hinge universal shaft and with single hinge driven shaft.
Can be mounted without disassembly the driven shafts.
  • material: rubber, black
  • delivery without equipment
  • made in EU
  • one piece will be needed for each wheel

additional needed parts:
19,68 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4416
Delivery only at advance payment.

Sleeve rubber ( outer universal shaft side )

Sleeve can be used for the models Barkas B1000 and B1000-1.
Fit to all Barkas B1000 with douple hinge universal shaft and with single hinge driven shaft and Barkas B1000-1.
Mounting only after disassembly the driven shafts.
  • material: rubber, black
  • delivery without equipment
  • made in EU
  • one piece will be needed for each wheel

additional needed parts:
18,26 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4417

Band clamp, plastic for sleeve rubber ( outer universal shaft side )

Clamp for rubber sleeve other universal shaft of Barkas B1000 and B100-1 and inner sleeve for Barkas with single hinge universal shaft.
  • material: plastic, black
  • length: 750 mm, width: 8 mm
  • made in Germany
  • 4 pieces will be needed for the type with single hinge drive shaft, 2 pieces will be needed for the type with double hinge drive shaft
3,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8544

Band clamp for sleeve rubber ( outer universal shaft side )

Clamp for rubber sleeve other universal shaft of Barkas B1000 and B100-1 and inner sleeve for Barkas with single hinge universal shaft.
  • material: stainless steel
  • length: 680 mm, width: 8 mm
  • made in Germany
  • 4 pieces will be needed for the type with single hinge drive shaft, 2 pieces will be needed for the type with double hinge drive shaft
4,85 €inclusive VAT, plus shipping costs

Art.No. 6552
Delivery only at advance payment.

Sliding sleeve halves (universal shaft)

Sliding sleeve halves for mounting sleeve rubber (wheel side) at universal shaft of Barkas B1000 and B1000-1.
Delivery as an one paar (2 pieces).
For each drive shaft, one set of sliding pieces will be needed.
Price for one pair will be 45,60 €
54,15 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6365
Delivery only at advance payment.

Sleeve rubber ( inner universal shaft side )

Rubber sleeve to protect the inner joint (gearbox side)of universal shaft.
Fit to to older drive shafts (singe hinge system) of Barkas B1000.
  • complete new production
  • made in EU
  • material: rubber, black
  • for each drive shaft one piece will be needed

Additional needed accessory:
14,26 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4418
Delivery only at advance payment.

Band clamp for inner sleeve rubber ( inner universal shaft side )

Clamp for rubber sleeve inner universal shaft of Barkas B1000 with single hinge universal shaft.
  • material: stainless steel
  • length: 360 mm, width: 4,6 mm
  • made in Germany
  • 2 pieces will be needed
2,48 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8010

Drive shaft overhauled

Complete overhauled driven shaft for Barkas B1000 and B1000-1.
Fit to the left and right hand.
  • overhauled spare part
  • old part have to be shiped to our company in advance!
exchange part
580,13 €inclusive VAT, plus shipping costs

Art.No. 4420

Woodruff key for outer universal shaft

Fitted key for outer stub axle for the final drive.
Barkas B1000, old version of drive shaft.
  • 2 pieces will be needed
3,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8540
The product category Barkas B 1000 > Spare parts > Front axle is spread over 6 sites:
123456
Show all products
Wir versenden mit DHL.
Banküberweisung
PayPal
SEPA-Lastschrift

Rechtliches

Information

Sonstiges

© 2003 - 2026 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: günstiges Holzspielzeug von Spielzeug-Truhe.de