This site in german: Barkas B 1000 > Ersatzteile > Vorderachse 
You are here: > Barkas B 1000> Spare parts> Front axle

Front axle

The product category Barkas B 1000 > Spare parts > Front axle is spread over 6 sites:

Ball joint for steering push rod, left hand ( cone 18 mm ) Germany

Joint with left tap connection for the push rod with cone 18mm.
This spare part is produced in Germany in high quality.
  • Cone: diameter from 14,5mm to 16mm, thread M12x1,5
  • thread push rod side: M20x1,5 LEFT, tap length: 50mm
  • for each rod will be one left and one right ball joint needed
  • made in Germany
45,22 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6940

Ball joint for steering push rod, right hand (cone 18 mm), Germany

Joint with left tap connection for the push rod with cone 18mm.
This spare part is produced in Germany in high quality.
  • Cone: diameter from 16mm to 18mm, thread M14x1,5
  • thread push rod side: M20x1,5 RIGHT, tap length: 70mm
  • for each rod will be one left and one right ball joint needed
  • made in Germany
59,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7604

Ball joint for steering push rod, left hand (cone 18mm), germany

Joint with left tap connection for the push rod with cone 18mm.
This spare part is produced in Germany in high quality.
  • Cone: diameter from 16mm to 18mm, thread M14x1,5
  • thread push rod side: M20x1,5 LEFT, tap length: 70mm
  • for each rod will be one left and one right ball joint needed
  • made in Germany
59,36 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7603

Between rod for steering

Between rod for Barkas B1000 and B1000-1.
Made in Germany with high quality rod ends !
  • cone rod end: 16mm
  • made in Germany
130,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4512

Steering push rod ( cone 18 mm )

Complete componet of steering rod. Fit to Barkas B1000 and B1000-1. Delivery inclusive two universal joints (1x left tap nad 1x right tap with cone 18 mm).
  • lenght of the rod: 91 cm
  • diameter D= 24 mm
  • lenght from middle-middle ball joints: ca. 97 cm
  • scope of delivery incl. two clips to locking thr joints
  • one piece will be needed
  • all parts made in Germany
155,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4513

Steering push rod ( cone 16 mm )

Complete componet of steering rod. Fit to Barkas B1000. Delivery inclusive two universal joints (1x left tap nad 1x right tap with cone 16 mm).
  • lenght of the rod: 91 cm
  • diameter D= 22 mm
  • lenght from middle-middle ball joints: ca. 97 cm
  • scope of delivery incl. two clips to locking thr joints
  • made in Germany
  • one piece will be needed
150,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6648

Bolt for knuckle-long, complete with needle bearing

Set with bolt for upper side, fit to all B-1000 and B1000-1 (Barkas)
compelete set with needle bearing.
  • length of bolt: 101mm
  • diameter of bolt: 25mm
  • outer diameter of needle bearing: 37mm
  • length of needle bearing: 30mm
87,02 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4514

Bolt for knuckle-short, complete with needle bearing

Set with bolt for down side, fit to all B-1000 and B1000-1(Barkas)
compelete set with needle bearing.
  • length of bolt: 86mm
  • diameter of bolt: 25mm
  • outer diameter of needle bearing: 37mm
  • length of needle bearing: 30mm
87,02 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4515

Grease nipple for knuckle front axle

Lubricating nipple for the bolt-knuckle at the down and upper side of the front axle.
Fit to all Barkas B1000 and B1000-1
  • delivery as an single part
  • thread: M10x1mm
  • spanner gap: 11mm
  • total 4 pieces will be needed
1,31 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8274

Grease nipple stainless steel, for knuckle front axle

Lubricating nipple made of stainless steel for the bolt-knuckle at the down and upper side of the front axle.
Fit to all Barkas B1000 and B1000-1
  • delivery as an single part
  • material: 1.4305 VA
  • thread: M10x1mm
  • spanner gap: 11mm
  • total 4 pieces will be needed
8,21 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8553

The product category Barkas B 1000 > Spare parts > Front axle is spread over 6 sites:
123456
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: günstiges Holzspielzeug von Spielzeug-Truhe.de