This site in german: Wartburg 353 > Ersatzteile > Vorderachse 
You are here: > Wartburg 353> Spare parts> Front axle

Front axle

Category Front axle has the subcategory

The product category Wartburg 353 > Spare parts > Front axle is spread over 6 sites:

Band clamp , long

Rebound strap for mounting of sleeve rubbers of universal shafts
long band clamp (for example for mounting of sleeve rubber on shaft joint), for diameter from 40mm up to 110mm
application:
  • the band clamp have to bent around the sleeve rubber by hand, so that it clinging to the sleeve rubber in best way
  • fixing this position by hooking into
  • spanning the band clamp with a pincers
  • ready
2,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6408

Snap ring sleeve rubber final drive

Circlip for mounting at the Wartburg 353 and Wartburg 1,3 drive shaft boot.
Can be used at the inner sleeve of the outside joint.
  • Two piece will be needed for each car

Needed plier for dismounting and mounting (not part of this offer):
1x Seeger ring pliers, external retaining rings 19-60mm (LDM-part.-Nr.:8322)
1,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7680

Sleeve rubber set gear box side

One kit of rubber boot and assambly parts for the universal shaft gearbox side.
Fit for all universal shaft of the Wartburg 353 and Wartburg 312 right and left hand.
Scope ofe delivery:
1x Sleeve rubber set gear box side
2x Band clamp, long (part.-No.:6408)
2x Spring clamp (part.-No.:8222)
1x High performance grease with molybdenum, tube 100g (Art.-Nr.:6256)
  • one set will be needed for each drive shaft
19,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8224

Sleeve rubber ( inner side )

Rubber sleeve gearbox side for the right and left universal shaft.
Fit for all universal shaft of the Wartburg 353 and Wartburg 312
  • material: rubber, black
  • two pieces will be needed
  • made in Europe
  • delivery as an single part without mounting spring and mounting strap

Additional needed mounting parts (not scope of delivery of the rubber boot):
2x Band clamp, long (part.-No.:6408)
2x Spring clamp (part.-No.:8222)
1x High performance grease with molybdenum, tube 100g (Art.-Nr.:6256)
15,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3148

Spring holder for rubber boot gearbox side

Spring clamp for mounting the rubber sleeve gearbox side at the drive shaft.
Fit for the right and left car side at all types of Wartburg 353 and Wartburg 312.
This part is an new reproduction made in Germany. Best replacement for the original one.
Made of stainless steel.
Simply to assamble also by mounted driveshaft.
3,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8222

high performance grease with molybdenum, tube 100g

high load carrying capacity
low oxidation, suitable for longterm lubrication
resistant to water wash-out
good corrosion protection
protection against fretting corrosion
price 63,90 Euro / kg
7,39 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6256

Wheel nut AM 12 x 1,5 cone collar

cink-coated wheel nut with cone collar for Trabant, Wartburg and all other vehicles with same bolts
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
  • replacement for original wheel nut with high quality
1,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6338

Wheel nut set, AM 12 x 1,5 cone collar

One set of cink-coated wheel nut with cone collar for Trabant, Wartburg and all other vehicles with same bolts.
Kit consists of 16 pieces.
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
  • replacement for original wheel nut with high quality
0,94 € per piece
14,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7498

Wheel nut set AM 12 x 1,5 cone collar, covered

One set of cink-coated wheel nut with bigger cone collar. The nut end is closed an cover the bolt against dirt and water. Usefull for Trabant, Wartburg and all other vehicles with same bolts.Extended hexagon.
One kit consist of 16 pieces.
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
1,69 € per piece
26,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7499

Wheel nut AM 12 x 1,5 cone collar, covered

Cink-coated wheel nut with bigger cone collar. The nut end is closed an cover the bolt against dirt and water. Usefull for Trabant, Wartburg and all other vehicles with same bolts
extended hexagon
  • thread: M12 x 1,5
  • spanner gap: SW 19 mm
2,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7297

The product category Wartburg 353 > Spare parts > Front axle is spread over 6 sites:
123456
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2020 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Bongs im Headshop | Spielzeug-Truhe.de - Holzspielzeug