This site in german: Wartburg 353 > Ersatzteile > Motor 
You are here: > Wartburg 353> Spare parts> Engine

Spare parts and accessories for the three cylinder two stroke motor

Category Spare parts and accessories for the three cylinder two stroke motor has the following subcategorys:

The product category Wartburg 353 > Spare parts > Engine is spread over 9 sites:

Carburettor main jet BVF 40F (M5-125)

Nozzle as main jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet inside of the Carburettor case (float chamber). For dismounting and mounting is is necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • Jet size: 125
  • Jet thread: M5
  • delivery as single part
3,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8406

Carburettor idler jet BVF 40F (M5-75)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 75
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8407

Carburettor idler jet BVF 40F (M5-80)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 80
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8408

Carburettor idler jet BVF 40F (M5-85)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 85
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8409

Carburettor idler jet BVF 40F (M5-90)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 90
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8410

Mounting bolt for throttle valve

Screw for fix the butterfly valve at the throttle shaft.
Fit for the Berlin carburettor BVF 40F.
Please note: this screw have to be mounted properly, use Threadlocking - medium strength (Art.-Nr.:6380).
Lose screws can cause worse engine damages!
  • Raised countersunk-head screw
  • delivery as single part
  • total: 2 pieces will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8411

Hose kit for carburettor 40 F

Connection hose for the idle system of the carburettor type BVF 40F called Berliner Carburettor
Fit to Wartburg 353, B1000.
  • Delivery inclusive two hose clamps
  • Made in Germany
  • one kit will be needed
5,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8419

Mounting nut for accelerating pump

Nut and secure washer for fix the tappet of the accelerating pump.
Fit for the Berlin carburettor BVF 40F.
For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • scope of delivery: 1x nut and 1x spring washer
  • total: one pieces will be needed
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8442

Bottle spout for 20 Liter canisters

Plasic spout for the offered 20 liter mixture oel packages (Addinol)
Best use to ladle off form bigger tanks. Take on at journeys for instance two stroke oel.
  • delivery as single part
  • only use for the 20L canisters of the trade Addinol
5,41 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8457
The product category Wartburg 353 > Spare parts > Engine is spread over 9 sites:
123456789
Show all products

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2021 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas
  Werbung: Bongs im Headshop | Spielzeug-Truhe.de - Holzspielzeug