This site in german: Wartburg 353 > Ersatzteile > Motor 
You are here: > Wartburg 353> Spare parts> Engine
Navigation

Spare parts and accessories for the three cylinder two stroke motor

Category Spare parts and accessories for the three cylinder two stroke motor has the following subcategorys:

The complete offer in Spare parts and accessories for the three cylinder two stroke motor

Engine block 50hp

engine mount for Wartburg 353 engine with 50 horse power.
Motor block is nutshells blasded for cleaning and coated wit 2-K varnish (black).
Cylinders are grinded and honed, inclusice 3 pistions made in Germany.
Scope of delivery complete with pistons, piston rings and pistion pins.
Please click on Detail for more informations about this exchange part.
Please note: Delivery without crankshaft!Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
1636,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6482

Engine block 45hp

engine mount for Wartburg 353 and Barkas 1000 with 45 horse power.
Motor block is nutshells blasded for cleaning and coated wit 2-K varnish (black).
Cylinders are grinded and honed, inclusice 3 pistions made in Germany.
Scope of delivery complete with pistons, piston rings and pistion pins.
Please click on Detail for more informations about this exchange part.
Please note: Delivery without crankshaft!Delivery only in exchange! Please send in advance one brake cylinder original IFA to our company.
1636,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6999

Bolt set for Engine block

One set of bolts for the crankcase Wartburg 311, 312, 353 and Barkas 1000 with 45 or 50 horse power.
  • delivery inclusive washer
  • use for mounting the cylinder block and the crank case
  • 8 pieces screws M10 different length and 6 pieces of screws M8
9,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8027

Air filter

air filter fit to all Wartburg and Barkas with two stroke motor.
no specification or manufacturing year limit.
made in Germany
  • one piece will be needed
8,80 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3175

Air filter

air filter fit to all Wartburg and Barkas with two stroke motor.
no specification or manufacturing year limit.
made in Germany
  • one piece will be needed
  • with expanded metal as cover (no paperboard with holes) for better air flow
10,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7229

Freeze cap

Plate shape plug for secure the motor block for freeze demages.
Fit to all cooling water holes diameter 36mm for the Wartburg and Barkas with two stroke motor.
made in Germany
  • three pieces will be needed
6,76 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7255

Freeze cap 34mm

Pot shape plug for secure the motor block for freeze demages.
Fit to all cooling water holes diameter 34mm for the Wartburg and Barkas with two stroke motor.
made in Germany
  • three pieces will be needed
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7886

crank shaft, half crank cheek

Crank shaft with standard version of conrod and common feet bearings made (cage of aluminiuml).
High qualitiy, overhauled in Germany
For engines of 2-stroke B1000 and for Wartburg 353 engine with 45/50 horsepower

Overhauling part:
Please send your overhaulable crankshaft to our company in advance. After checking the delivered part for the possibility of overhauling we will send you an email with all additional details.
Overhaul part, please send your crankshaft to our company in advance for repairing !
1904,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6415

Crank shaft, 50hp

Crank shaft with standard version of conrod and common feet bearings made (cage of aluminiuml).
High qualitiy, overhauled in Germany
For engines of 2-stroke B1000 and for Wartburg 353 engine with 45/50 horsepower

Overhauling part:
Please send your overhaulable crankshaft to our company in advance. After checking the delivered part for the possibility of overhauling we will send you an email with all additional details.
Overhaul part, please send your crankshaft to our company in advance for repairing !
1904,00 €inclusive VAT, plus shipping costs
Delivery in 14 days.

Art.No. 6116

Crank shaft, half crank cheek, with reinforced lower bearing of conrod

Crank shaft (half crank cheek) with standard conrods but with strengthened lower bearings.
  • reinforced lower conrod bearings with steel cage in place of aluminium cage
  • scope of delivery: crank shaft inclusive needle bearings for piston pin und piston ring sealing
  • very good quality made in Germany


Overhauling part:
Please send your overhaulable crankshaft to our company in advance. After checking the delivered part for the possibility of overhauling we will send you an email with all additional details.
Overhaul part, please send your crankshaft to our company in advance for repairing !
2231,25 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6996

Crank shaft with reinforced lower bearing of conrod

Crank shaft with standard conrods but with strengthened lower bearings.
  • reinforced lower conrod bearings with steel cage in place of aluminium cage
  • scope of delivery: crank shaft inclusive needle bearings for piston pin und piston ring sealing
  • very good quality made in Germany


Overhauling part:
Please send your overhaulable crankshaft to our company in advance. After checking the delivered part for the possibility of overhauling we will send you an email with all additional details.
Overhaul part, please send your crankshaft to our company in advance for repairing !
2231,25 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 6997

Piston ring sealing crank shaft (W353/B1000)

Special piston ring for the sealing of the crank case. Can be mounted at the flywheel and the v-pully side, crankshaft with 45 hp or 50 hp.
  • fit to 2-stroke-engines of Wartburg 353 and Barkas B1000
  • 4 piece will be needed for each engine
13,49 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6903

Piston ring sealing crank shaft (W353/B1000)

Special piston ring for the sealing of the crank case. Can be mounted at the flywheel and the v-pully side, crankshaft with 45 hp or 50 hp.
  • fit to 2-stroke-engines of Wartburg 353 and Barkas B1000
  • 4 piece will be needed for each engine
42,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8556

Needle bearing for crankshaft, flywheel-side

needle bearing for additionally clamping of clutch-shaft in crankshaft

K 12 x 16 x 13
5,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6199

safety plate flywheel (W353/B1000)

Locking plate for the five srews, which are necessary to mount the flywheel at crankshaft.
  • surface: galvanized with olive drap colour
  • fit to 2-stroke-engines of Wartburg 311, 312, 313, 353, Framo Barkas B1000
  • one piece will be needed for each engine
9,98 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 620

Special bolt flywheel (W353/B1000)

One-off-production of the hexagon screw for mounting the flywheel at the crankshaft.
  • tap: M8
  • spanner gap: 13
  • surface: galvanized
  • fit to 2-stroke-engines of Wartburg 311, 312, 313, 353, Framo, Barkas B1000
  • 5 pieces will be needed for each engine
6,20 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6904

safety plate beltwheel (W353/B1000)

Locking plate for the two srews, which are necessary to mount the beltwheel at crankshaft.
  • surface: galvanized
  • fit to 2-stroke-engines of Wartburg, Barkas B1000
  • one piece will be needed for each engine
2,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7154

Starter 12V, complete (W353/B1000)

Starter inclusive magnet for starter fit to Wartburg 353 and Barkas B1000 (2-stroke).
Spare part is overhauled in Germany. High quality. Exchange part!
  • voltage: 12V
  • output: 0,58KW
  • pinion teeth: 9

Overhaul part, please send the clutch and clutch disc in advance to our company
Overhaul part, please send your strater to our company in advance
218,96 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3155

Freewheel for starter 12V (W353/B1000)

Starter freewheel complete premounted inclusive pinion (9 teeth).
Fit to Wartburg 353 and Barkas B1000 (2-stroke).
This part is made in Europe. High quality, best replacement for the genuine spare part.
  • one piece will be needed
Original spare part number: 820.11-230
52,43 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7643

Magnet, complete for starter 12V

Magnet switch for the starter motor of the Barkas B1000 und Wartburg 353.
1x threat connection M8 for ring terminal, battery positive terminal.
1x connection for switch wire, blade terminal 6,8mm (standard)
  • voltage 12V
  • spare part is made in EU
  • one piece will be needed
49,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6066
1+1

mounting set for starter 12V

mounting set for starter consist of:
  • 2x screw M12 x 100
  • 2x washer
  • 2x nut M12
5,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6386

V-belt (W353 / B1000)

V-belt 10 x 1150 fit to Wartburg 353 and Barkas B1000 to transmit the rotary to the dynamo and to the wather pump shaft.
  • size: 10 x 1150 mm
  • new German production
Special offer normaly 14,40 € now 9,99 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3176

Carburettor bowdencable W353, BVF 40F carburettor

Throttle control cable for the carburettors type BVF 40F for Wartburg.
Machanical connection between accelerator and throttle valve of the carburettor.
  • total length: 105 cm
  • length of the bowdencabe cover: 81 cm
  • one piece will be needed
  • made Germany
22,10 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3510

Startmixture bowdencable

bowdencable for startmixture Wartburg 353 (two stroke engine)
  • one piece will be needed
27,75 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 3520

Two Stroke Oil 2-TT, 1 Liter

Particulate with synthetic oil oil, mad by Sartol.
Volume: 1L
Additional comment: Notes for used oil disposalLink opens in a new window.
9,69 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7624

ADDINOL SUPER 2T, 2-stroke motor oil, MZ405

sheer minerally oil
volume: 1L
Additional comment: Notes for used oil disposalLink opens in a new window.
9,40 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6155

Two Stroke Oil 2-TB, 1 Liter

Sheer minerally oil, mad by Sartol.
volume: 1L
Additional comment: Notes for used oil disposalLink opens in a new window.
8,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7565

Two Stroke Oil JAGo XM 2T, 20 Liter

Sheer minerally oil, mad by Sartol.
volume: 20L
Additional comment: Notes for used oil disposalLink opens in a new window.
6,16€ per liter
123,20 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 7-24 Werktagen.

Art.No. 7567

ADDINOL SUPER MIX, 2-stroke motor oil, 20 Liter, MZ405

sheer minerally 2-stroke-oil
volume: 20L
Additional comment: Notes for used oil disposalLink opens in a new window.
6,90€ per liter
138,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6382

ADDINOL SUPER 2T, 2-stroke motor oil, 1 Liter, MZ406

particulate with synthetic oil
no sheer minerally oil
volume: 1L
Additional comment: Notes for used oil disposalLink opens in a new window.
11,86 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6123

ADDINOL SUPER 2T, 2-stroke motor oil, 20 litre, MZ406

particulate with synthetic oil
no sheer minerally oil
content: 20L
Additional comment: Notes for used oil disposalLink opens in a new window.
7,95€ per liter
159,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6158

ADDINOL SUPER SYNTH 2T, full synthetic 2-stroke motor oil, MZ 408

full synthetic oil
best quality of 2-stroke oil
volume: 1L
also for sport-engines
Additional comment: Notes for used oil disposalLink opens in a new window.
18,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6156

ADDINOL SUPER SYNTH 2T, full synthetic 2-stroke motor oil, 20 L, MZ 408

full synthetic oil
best quality of 2-stroke oil
volume: 20L
also for sport-engines
Additional comment: Notes for used oil disposalLink opens in a new window.
12,50€ per liter
250,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6159
1+1

PUTOLINE, TT Scooter, full synthetic 2-stroke motor oil with strawberry smell

full synthetic oil
best quality of 2-stroke oil
content: 1L
  • reduce carbon deposits
  • suitable for premix and autolube injection systems
  • clean burning
  • minimise smoke
  • extend engine component life
  • also for sport-engines
  • for mixing ratio: 1:50 1:33 1:25 (2%-4%)

Additional comment: Notes for used oil disposalLink opens in a new window.
12,74 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 6390

seal for carburettor case (new type) Jijkov

seal for the new type of carburettor of Wartburg 353, called Jijkov-carburettor
  • matreial: sealing paper
  • one piece will be needed
12,54 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6479

Seal for carburettor flange (new type) Jijkov

seal for flange from the new type of carburettor of Wartburg 353, called Jijkov-carburettor to the intake manifold.
  • material: sealing paper
  • made in Germany
  • two ore three piece will be needed
  • 1x carburettor-isolating plate, 1x isolating plate-cover plate, 1x cover plate-succition pipe
4,61 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6518

float gauge for carburettor (new type) Jijkov

carburettor float gauge for carburettor of Wartburg 353, B1000 called Jijkov

made of plastic

only few pieces available (originale spare part)
56,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6622

Self-repair-set carburettor Jijkov

10-part jet set for the carburettor of Wartburg 353, B1000 called Jijkov
delivery inclusive gauge needle valve
38,24 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6984

Self-repair-set carburettor 40F

6-part jet set for the carburettor BVF 40F of Wartburg 353, B1000.
Called Berliner-carburettor 40F
Delivery inclusive gauge needle valve and Mixture screw BVF 40F.
  • Material: brass / rubber
  • one set will be needed
  • made in Germany / EU
19,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6985

Seal for carburettor case 40 F, made in Germany

Sealing for the both housings (float case) of old type of carburettor type BVF 40F.
This sealing is made in Germany of special fuel resistant sealing paper. The holes and sizes are exactly and conforms to the original spare part.
Fit to the Berliner carburettors for Wartburg 353 (40F 2-11) and Barkas B1000 40F 1-12.
8,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7799

Seal for carburettor case (old type) 40 F

Simple paper sealing with small divergences at the accuracy of fit.
Cheaper product, made in Europe.
seal for housing of old type of carburettor of Wartburg 353 and B1000, called 40-F
2,90 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6478

float gauge for carburettor (old type) 40 F

carburettor float gauge for old type of carburettor of Wartburg 353, B1000 and Robur (LO) called 40 F
Reproduction made in EU
29,56 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6517

Carburettor W353

Complete overhauled Carburettor for the three cylinder two stroke Wartburg engine with 1000 ccm
cylinder capacity. delivery without intake pipe.
Carburettor type: 40F 2-11
  • complete overhauled
  • high quality from Germany

Please note, we can only repair this spare part if you ship 1x carburettor 40 F2-11 to our company in advance!
Please send in advance one brake cylinder original IFA to our company.
280,00 €inclusive VAT, plus shipping costs
Lieferbar innerhalb von 6-8 Wochen.

Art.No. 7031

Paper seal for flange throttle valve (carburettor 40 F)

Sealing for flange throttle valve of old type of carburettor of Wartburg 353 and B1000, called BVF 40 F.
High quality made in Germay. Made of fuel resistant sealing paper.
  • two pieces needed for one carburettor
  • mounted between flange throttle valve (carburettor 40 F) and cover of carburettor (drainer)
  • between cover of carburettor (drainer) and intake manifold
  • fit for Wartburg 353 und B1000
3,74 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6485

Rubber seal for flange throttle valve (carburettor 40 F)

Rubber sealing for flange throttle valve of old type of carburettor of Wartburg 353 and B1000, called BVF 40 F.
High quality made in Germay. Made of fuel resistant rubber.
  • one pieces needed for one carburettor
  • mounted between flange throttle valve (carburettor 40 F) and carburettor case
  • fit for Wartburg 353 und B1000
  • thickness: 1mm
4,95 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6486

Seal for flange suction pipe - engine block

Paper seal for flange of the inlet manifold of the carburettor type BVF 40 F, Jijkov and 36F. Mounted:
  • between flange inlet manifold and engine mount
  • one pieces needed
  • fit for Wartburg 353, B1000 and Wartburg 312
7,50 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6897

Mounting bolt for inlet pipe

Bolt for flange of the inlet pipe to the connection to the engine.
Fit to flange with the Berlin carburettor or the Jijkov-carburettor.
  • hexagon socket screw M8 x 16mm
  • strength class: 8.8
  • with external teeth lock washer
  • galvaniced
  • total: 8 pieces will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 6880

Rubber spring for engine and gear box

Engine mount as an rubber-metal-block for motor- and gearbox- holder of the Barkas B1000 2-stroke and Wartburg 353.
The rubber spring has got on one side an bolt connection (M8 stud) and the other side an inside nut (M8 female thread)
Engine mounts are degenerating the vibrations of the engine to the car body.
  • delivery as an single part, without any mounting bits
  • for Barkas one piece will be needed
  • for Wartburg two pieces will be needed
  • rubber-metal-block

additional needed special tools for mounting:
  • engine lifter / engine carrier
13,39 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 4441

Piston ring pliers

Piston ring mounting and demounting tool.
With this pliers the changing of the piston rings will be simple and save, because the rins are retained at the outside.
  • working dimensions: 1-100mm
  • surface: nickel-plated
  • with blue plastic handles
  • made in Germany
35,42 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7619

Ring gear for starter

Ring gear for starter fit to Wartburg 353 all models and Barkas B1000 with 2-stroke engine.
The starter gear can be used for the clutch systems D=180mm and D=200mm (only mounted at Barkas).
The ring gear does NOT fit to the Barkas B1000-1 (with four stroke engine)
{[one piece will be needed][number of teeth: 97][made in EU]}
25,96 €inclusive VAT, plus shipping costs
0temporary not available
temporary not available

Art.No. 4444

Oel bottle without fluid, for 1 Liter

New unused ol bottle inclusive cap.
Best use to ladle off form bigger tanks. Take on at journeys for instance two stroke oel.
Bottle without any print.
  • Bottle without substance
  • actualy colour: silver gray
  • for one Liter volume
4,00 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 7900

Fuel pump

The diaphragm fuel pump is mounted direct at the engine. Fit for Wartburg 353 and Barkas B1000 (2-stroke engine)
The petrol pump will be delivered as complete unit.
  • Reproduction in Europe
  • delivery without Sealing
  • one piece will be needed
49,97 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 3140

Sealing set Carburettor BVF 40F

Paper sealing kit for carburettor type BVF 40F, Wartburg 353 and Barkas B1000 and some boat engines with this carburettor type.
Best use to refresh the carburettor. All parts are made from the orignial patterns and our own quality grade.
Set consist of:

  • one set will be needed
  • material: sealing paper, Vulkanfieber, fuel resistant rubber
  • high quality made in Germany
20,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8305

Carburettor idler air jet BVF 40F (M6-150)

Nozzle as idling air jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet inside of the Carburettor case. For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • Jet size: 150
  • Jet thread: M6
  • delivery as single part
4,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8405

Carburettor main jet BVF 40F (M5-125)

Nozzle as main jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet inside of the Carburettor case (float chamber). For dismounting and mounting is is necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • Jet size: 125
  • Jet thread: M5
  • delivery as single part
3,59 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8406

Carburettor idler jet BVF 40F (M5-75)

New produced Nozzle, made in Germany !
Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 75
  • Jet thread: M5
  • delivery as single part
5,62 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8407

Carburettor idler jet BVF 40F (M5-80)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 80
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8408

Carburettor idler jet BVF 40F (M5-85)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 85
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8409

Carburettor idler jet BVF 40F (M5-90)

Nozzle as idling jet for the Wartburg 353 and Barkas B1000 carburettor called Berliner Vergaser-40F
This nozzle is mountet at the side of the Carburettor case. For dismounting and mounting is it necessitating to remove an SW11 plug. (use for mounting an new sealing LDM-part-no.:8300)
Please note: standard Wartburg is nozzle size: 75
For Barkas the nozzles are variegating form 75,80,85,90. Please check before whitch size is mounted at your carburettor.
Exact mounting place: please click on Detail
  • Jet size: 90
  • Jet thread: M5
  • delivery as single part
3,75 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8410

Mounting bolt for throttle valve

Screw for fix the butterfly valve at the throttle shaft.
Fit for the Berlin carburettor BVF 40F.
Please note: this screw have to be mounted properly, use Threadlocking - medium strength (Art.-Nr.:6380).
Lose screws can cause worse engine damages!
  • Raised countersunk-head screw
  • delivery as single part
  • total: 2 pieces will be needed
0,55 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8411

Hose kit for carburettor 40 F

Connection hose for the idle system of the carburettor type BVF 40F called Berliner Carburettor
Fit to Wartburg 353, B1000.
  • Delivery inclusive two hose clamps
  • Made in Germany
  • one kit will be needed
5,77 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8419

Mounting nut for accelerating pump

Nut and secure washer for fix the tappet of the accelerating pump.
Fit for the Berlin carburettor BVF 40F.
For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • scope of delivery: 1x nut and 1x spring washer
  • total: one pieces will be needed
0,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8442

Bottle spout for 20 Liter canisters

Plasic spout for the offered 20 liter mixture oel packages (Addinol)
Best use to ladle off form bigger tanks. Take on at journeys for instance two stroke oel.
  • delivery as single part
  • only use for the 20L canisters of the trade Addinol
5,09 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8457

Spring accelerator pump for carburettor (old type) 40 F

Pessure spring for the aditional accelerator pump of the carburettor type BVF 40F. Fit for Wartburg 353 and B1000.
For dismounting and mounting is it necessitating to split the carurettor case.
Exact mounting place: please click on Detail
  • Reproduction made in Germany
  • surface: galvaniced
  • one piece will be needed
3,88 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8468

Screw for Exhaust manifold (engine side)

Hexagon head bolt for mounting the mainfold at the engine block (exhaust side)
Delivery complete with washer.
  • strength class 10.9
  • SW 17
  • surface: galvaniced
  • Wartburg 353: 6 pieces will be needed
  • Barkas B1000: 6 pieces will be needed
2,52 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8483

Pin for float gauge carburettor 40 F

Steel pin for the carburettor float gauge.
Fit for BVF carburettors type 40F of Wartburg 353, B1000 and Robur (LO).
  • delivery as single part
  • made in Germany
  • one piece will be needed
2,25 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8582

Carburettor bowdencable W353, Jijkov carburettor

Throttle control cable for the carburettors Type Jijkov for Wartburg 353. Machanical connection between accelerator and throttle valve of the carburettor.
  • total length: 106 cm
  • length of the bowdencabe cover: 81 cm
  • one piece will be needed
  • made in Germany
22,94 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8607

Bottle spout with cock for 20 Liter canisters

Plasic spout with cock for the offered 20 liter mixture oel packages (Addinol)
Best use to ladle off form bigger tanks. Take on at journeys for instance two stroke oel.
  • delivery as single part
  • only use for the 20L canisters of the trade Addinol
5,81 €inclusive VAT, plus shipping costs
Delivery in 1-3 days

Art.No. 8662
The complete offer in Spare parts and accessories for the three cylinder two stroke motor

* All prices inclusive VAT and plus shipping costs.
© 2003 - 2023 LDM-tuning.de
Ersatzteile für Trabant, Wartburg und Barkas